US10705597B1
A virtual reality (VR) system comprising a head-mounted display (HMD) and handheld controller set is enhanced to provide a more realistic end user VR experience, e.g., for boxing or other interactive training. In this approach, and in lieu of simply establishing a boundary area for the VR experience, the user also maps a position of a real-world object into a reference frame of the VR environment. This mapping is facilitated using the handheld controller itself, e.g., as positioned in a backwards-facing manner on the user's forearm. The real-world object is then simulated in the 3D VR environment as rendered by the VR HMD, and the user interacts with the real-world object (or its simulation) to provide a more enjoyable and useful interactive experience.
US10705591B2
A system for aggregated electronic device power management includes an aggregated power management arbitrator configured to collect activity information from one or more electronic devices regarding the use of a type of hardware component on the electronic devices. The aggregated power management arbitrator selects a timeout period for transmitting to one of the one or more electronic devices to define a minimum amount of time before the hardware component is transitioned to a lower-power state. The aggregated power management arbitrator may determine usage patterns for one of the electronic devices based on the collected activity information and the applications executing on the electronic device. A timeout period may be adjusted based on the determined usage pattern to improve efficiency of the power management of the electronic device.
US10705589B2
A system includes an ARM core processor, a programmable regulator, a compiler, and a control unit, where the compiler uses a performance association outcome to generate a 2-bit regulator control values encoded into each individual instruction. The system can provide associative low power operation where instructions govern the operation of on-chip regulators or clock generator in real time. Based on explicit association between long delay instruction patterns and hardware performance, an instruction based power management scheme with energy models are formulated for deriving the energy efficiency of the associative operation. An integrated voltage regulator or clock generator is dynamically controlled based on instructions existing in the current pipeline stages leading to additional power saving. A compiler optimization strategy can further improve the energy efficiency.
US10705565B2
A foldable display device including: a flexible display panel including a bending portion; and a folding unit supporting the flexible display panel and in-folding and out-folding a front surface of the flexible display panel. The folding unit includes a hinge unit bending and supporting the bending portion of the flexible display panel simultaneously in a clockwise direction and a counterclockwise direction.
US10705560B1
A sensor includes an analog front end having a circuit element responsive to a clock signal and a clock generating circuit configured to generate the clock signal having blanking time periods during which the clock signal is held at a constant level, wherein the circuit element is not operational during the blanking time periods. The blanking time periods correspond to time periods during which transitions of a common mode input voltage to the sensor are expected to occur.
US10705556B2
An aspect includes a direct digital synthesis system including a waveform generator with a waveform memory operable to store a plurality of waveform vectors and output a selected waveform vector. The direct digital synthesis system also includes a digital-to-analog converter operable to convert the selected waveform vector from a digital value to an analog signal responsive to a reference clock. The direct digital synthesis system further includes a controller operable to maintain phase continuity of the analog signal when an output of the analog signal is interrupted and restored.
US10705544B2
In order to restrain generation of a peak in the measured flow rate, a fluid control unit measures a flow rate of a fluid in a channel and outputs a signal indicating a valve operation amount of a fluid control valve obtained based on a deviation between a preset flow rate and a measured flow rate and a control coefficient, and the control coefficient for a stable state and the control coefficient for a transitional state are so set to moderate fluctuation of the valve operation amount to the deviation more in the transitional state than in the stable state. At or shortly after a timing when the stable state is switched to the transitional state, a signal is output that indicates an operation amount for a switching time calculated based on each of the operation amounts output at a plurality of timings in the stable state.
US10705532B2
Embodiments are provided that include a method that includes causing a mobile robot to navigate toward a standing test device placed within an environment of the mobile robot. The method also includes receiving, from a proximity sensor on the standing test device, sensor data indicative of proximity of the mobile robot to the standing test device as the mobile robot navigates toward the standing test device. The method further includes determining, based on the sensor data received from the proximity sensor on the standing test device, an approach motion profile followed by the mobile robot in navigating toward the standing device. The method additionally includes providing a control instruction for the mobile robot based on the determined approach motion profile.
US10705525B2
A method, computer readable medium, and system are disclosed for performing autonomous path navigation using deep neural networks. The method includes the steps of receiving image data at a deep neural network (DNN), determining, by the DNN, both an orientation of a vehicle with respect to a path and a lateral position of the vehicle with respect to the path, utilizing the image data, and controlling a location of the vehicle, utilizing the orientation of the vehicle with respect to the path and the lateral position of the vehicle with respect to the path.
US10705524B2
The present invention provides a task execution method and device. The task execution method includes: obtaining a task list, where the task list includes at least two to-be-executed tasks; determining a task mode, where the task mode includes a task set mode and a task flow mode; and executing the at least two to-be-executed tasks according to the determined task mode.
US10705522B2
A method for controlling a vehicle includes: determining whether map data for a first geographic section is stored in memory; and based on the map data having been stored: generating, through an object detection device and when the vehicle drives through the first geographic section by user control, first object information regarding vehicle surroundings; and storing first map data based on the first object information. The method further includes: based on the first map data having been stored, generating, based on the stored first map data, a driving route and driving control information for the first geographic section; generating, through the object detection device and when the vehicle drives along the driving route through the first geographic section, second object information regarding vehicle surroundings; and updating and storing the first map data based on the second object information.
US10705511B2
A system for implementing automation functions through abstraction layers includes a control application and an automation equipment abstraction framework executable in a runtime environment. The control application is designed to communicate with automation equipment using one or more automation functions. Each automation function comprises one or more equipment-agnostic instructions. During execution of the control application, the automation equipment abstraction framework receives an equipment-agnostic instructions and an indication of a particular unit of automation equipment. The automation equipment abstraction framework translates the equipment-agnostic instructions into equipment-specific automation instructions executable on the particular unit of automation equipment. These equipment-specific automation instructions may then be sent to the particular unit of automation equipment.
US10705504B2
A server for storing a machining result of a machine tool and one or a plurality of first terminals connected to the server via a network are included. The server includes an information disclosure part for disclosing the machining result, a request acceptance part for accepting from each of the first terminals a request for the machining result disclosed by the information disclosure part, and a machining condition provision part for providing each of the first terminals with a machining condition corresponding to the machining result in response to the request accepted by the request acceptance part. Each of the first terminals includes a request transmission part for transmitting the request for the machining result disclosed by the information disclosure part, and a machining condition acquisition part for acquiring the machining condition provided by the machining condition provision part in response to the request.
US10705500B2
The purpose of the invention is the simplification of a task of changing a control program upon a control device which is in use. A support device comprises: a computing part computing, for each unit program which configures a control program, identification information according to the content of each of the unit programs; a first transferring part transferring the unit programs and the identification information which is associated with the unit programs to a control device; a generating part generating changed unit programs according to a change operation upon any of the unit programs which configure the control program; and a second transferring part transferring the changed unit programs to a control device which is in use on condition that identification information is present on the control device which is identical to the identification information which is associated with the unit programs which configure the control program.
US10705491B2
A hydraulic system having a hydraulic device and at least one external database is provided. The hydraulic device comprises at least one hydraulic component, a control electronics having a memory to control the hydraulic component, and an identification element assigned to the hydraulic component. Specific parameters for the hydraulic component are stored in the external database, and the hydraulic component can be clearly identified by a configuration means via the identification element. The configuration means can be connected to the control electronics and the external database to access the specific parameters so that these can be transferred to the memory of the control electronics by means of the configuration means. Further, the disclosure relates to a method for parameterizing control electronics of a hydraulic device of a hydraulic system as well as an arithmetic unit for compiling a program code for the operation of a hydraulic assembly with several components.
US10705487B2
A method for a household electrical appliance to perform mode switching includes detecting whether a user is in a sleeping state, switching a current operation mode to a silent mode if the user is in the sleeping state, and operating in the silent mode.
US10705485B2
A pointer including a pointer body formed of synthetic resin, and a pointer attachment section formed of a material harder than the synthetic resin and provided in a rotation center portion of the pointer body, in which the pointer attachment section comprises a large-diameter section to which the pointer body is fixed and which includes a positioning section, and a small-diameter section which is provided coaxially with the large-diameter section and to which a pointer shaft is attached.
US10705478B2
A cleaning device includes a cleaning portion including a blade and a blade supporting member having a flat surface portion, and a cleaning frame including a mounting portion, a disposing portion and an accommodating portion. The disposing portion opposes the flat surface portion with a gap with respect to a thickness direction. The accommodating portion is adjacent to respective sides of the disposing portion with respect to a height direction. A distance between the flat surface portion and the accommodating portion with respect to the thickness direction is larger than the gap. The cleaning device includes a sealing member formed of a thermoplastic resin material and configured to seal the gap by a portion extending in a longitudinal direction between the disposing portion and the flat surface portion. A part of the sealing member is accommodated in the accommodating portion.
US10705474B2
There is disclosed an image post-processing method for adjusting glossiness of a fixed toner image. The method includes a glossiness control step and a temperature control step. The glossiness control step is a step of, to a toner image formed of a toner containing a light absorbing compound and fixed to a recording medium, emitting glossiness control light so as to reduce or increase glossiness of the toner image. The temperature control step is a step of heating the toner image immediately before the light is emitted to the toner image such that the toner image has a surface temperature which is at least 20° C. lower than a softening temperature of the toner. The glossiness control light has a maximum emission wavelength in a wavelength range in which the compound absorbs light and is made to at least reduce the glossiness of the toner image.
US10705471B2
A sheet processing apparatus includes a conveying portion; a conveying path for sheets conveyed by the conveying portion; a stack portion where sheets discharged from the conveying path are stacked; a first binding portion moving in a crossing direction crossing the conveying direction; a first regulating portion regulating a position of a sheet bundle stacked on the stack portion; a first guide member guiding the first regulating portion; a second regulating portion regulating a position of a sheet bundle on the stack portion in the crossing direction; a second guide member guiding the second regulating portion; a third regulating portion regulating a position of a sheet bundle on the stack portion in the conveying direction; and a second binding portion binding a corner portion of a sheet bundle without a staple. The first binding portion binds a corner portion of a sheet bundle by a staple.
US10705465B2
In one example in accordance with the present disclosure, a method for determining fusing energy per page based on an applied voltage is described. According to the method, a resistance of a fusing system is acquired and an input voltage of a fusing system is estimated. A duty ratio of the fusing system is measured and a fusing energy per processed page is then determined based on the input voltage, the fusing system resistance, and the duty ratio of the fusing system. A media weight is then determined based on the fusing energy per processed page.
US10705462B2
A motor driving unit controls motor conducted current of a brushed DC motor on the basis of a motor control signal. A motor control unit provides the motor control signal to the motor driving unit and thereby controls the brushed DC motor. A brush noise detecting unit detects brush noises in conducted current of the brushed DC motor and outputs a brush noise detection signal. A speed determining unit determines a time interval of the brush noises and determines a rotation speed of the brushed DC motor on the basis of the time interval. Further, the motor control unit determines whether the brushed DC motor is in a lock status or not on the basis of the rotation speed in a period that the motor control signal is provided to the motor driving unit to cause the brushed DC motor to be in operation.
US10705460B2
A fixing device includes a belt, a roller, a heater, and a reflector. The belt is rotatable in a rotational direction. The roller is positioned to be in contact with an outer peripheral surface of the belt so as to form a nip between the roller and the belt. The heater is disposed within an inner circumference of the belt. The reflector is disposed within the inner circumference of the belt. The reflector includes a first portion and a second portion. The first portion is in contact with and protrudes outwardly the belt at a first region downstream with respect to the nip in the rotational direction. The second portion is configured to reflect heat generated by the heater toward an inner surface of the belt at a second region upstream with respect to the nip in the rotational direction.
US10705457B1
A powder accommodating device includes: an accommodating portion that has an opening at one end, is installed horizontally to accommodate powder, and transports the powder toward the opening by rotation; a lid portion that has a cylindrical inner wall surface, covers the opening and is held in a non-rotational state; and an agitation portion including: a cylindrical portion that is disposed in the lid portion, communicates with the opening, and rotates integrally with the accommodating portion; and plural agitation rods that each have a rod shape protruding from the cylindrical portion in a rotation axis direction in a direction away from the cylindrical portion and circulate along the inner wall surface to agitate the powder in the hollow portion, wherein at least some of the plural agitation rods are connected to each other via a beam provided at a position out of the cylindrical portion.
US10705447B1
An image forming system includes first and second apparatuses. The first image forming apparatus includes a first image forming unit and a first transfer unit. The first image forming unit forms an image of at least one color. The first transfer unit transfers the formed image to a recording medium. The second image forming apparatus includes a second image forming unit and a second transfer unit. The second image forming unit forms an image different in at least a part of colors from the first image forming apparatus. The second transfer unit transfers the formed image to the recording medium on which the image has been formed by the first image forming apparatus. A total resistance of the second transfer unit along a direction in which a transfer current flows is larger than that of the first transfer unit.
US10705446B2
An image forming apparatus includes an information processing section that is provided with a housing and an image forming section that is disposed above the housing in a gravitational direction. In the image forming apparatus, a gap exists between the housing and the image forming section, and a ventilation hole is formed in an upper surface of the housing.
US10705445B2
First acquisition processing portion acquires first position and second position in main scanning direction. Second acquisition processing portion acquires, from third specific area having second specific length in sub scanning direction on color image, a plurality of third positions of a plurality of pixels of first color in main scanning direction, second specific length being larger than first specific length that is length in peripheral direction of each of image carriers. First derivation processing portion, based on plurality of third positions, derives first color shift amount that indicates an amount of shifting of pixels of first color in main scanning direction in third specific area. Second derivation processing portion, based on first position, second position, and first color shift amount, derives second color shift amount that indicates an amount of shifting between first color and second color in main scanning direction in first specific area.
US10705433B2
Embodiments of the present disclosure generally provide improved photolithography systems and methods using a digital micromirror device (DMD). The DMD comprises columns and rows of micromirrors disposed opposite a substrate. Light beams reflect off the micromirrors onto the substrate, resulting in a patterned substrate. Certain subsets of the columns and rows of micromirrors may be positioned to the “off” position, such that they dump light, in order to correct for uniformity errors, i.e., features larger than desired, in the patterned substrate. Similarly, certain subsets of the columns and rows of micromirrors may be defaulted to the “off” position and selectively allowed to return to their programmed position in order to correct for uniformity errors, i.e., features smaller than desired, in the patterned substrate.
US10705431B2
Embodiments of the present disclosure provide methods for producing images on substrates. The method includes providing a p-polarization beam to a first mirror cube having a first digital micromirror device (DMD), providing an s-polarization beam to a second mirror cube having a second DMD, and reflecting the p-polarization beam off the first DMD and reflecting the s-polarization beam off the second DMD such that the p-polarization beam and the s-polarization beam are reflected towards a light altering device configured to produce a plurality of superimposed images on the substrate.
US10705430B2
A method of measuring a parameter of interest relating to a structure formed by a process on a substrate, and associated apparatuses. The method includes measuring the structure with measurement radiation including a first illumination acquisition setting (determining one or more selected from: a wavelength, a polarization or an incident angle of the measurement radiation) to obtain a first measurement value for the structure. The method further includes estimating, by applying a correction model to the first measurement value, at least a second measurement value for the structure corresponding to measurement of the structure with a second illumination acquisition setting different from the first illumination acquisition setting.
US10705425B2
A photosensitive resin composition which contains a compound represented by general formula (1). (In general formula (1), R1-R4 may be the same or different, and each represents a hydrogen atom or an organic group having 1-4 carbon atoms; and X represents a tetravalent organic group having two or more structural units represented by general formula (2) in the main chain.) (In general formula (2), R5 represents a hydrogen atom or an alkyl group having 1-20 carbon atoms, and a plurality of R5s in the same molecule may be the same or different.) Provided is a photosensitive resin composition which enables the achievement of a cured film having low stress after being heated and fired, and which has excellent long-term stability, high sensitivity and high resolution.
US10705424B2
A composition crosslinkable by broad band UV radiation, which after cross-linking is capable of cold ablation by a UV Excimer Laser emitting between 222 nm and 308 nm, where the composition is comprised of a negative tone resist developable in aqueous base comprising and is also comprised of a conjugated aryl additive absorbing ultraviolet radiation strongly in a range between from about 220 nm to about 310 nm.The present invention also encompasses a process comprising steps a), b) and c) a) coating the composition of claim 1 on a substrate; b) cross-linking the entire coating by irradiation with broadband UV exposure; c) forming a pattern in the cross-linked coating by cold laser ablating with a UV excimer laser emitting between 222 nm and 308 nm. Finally the present invention also encompasses The present invention also encompasses a process comprising steps a′), b′) c′) and d′) a) coating the composition of claim 1 on a substrate; b) cross-linking part of the coating by irradiation with broadband UV exposure through a mask; c) developing the coating with aqueous base removing the unexposed areas of the film, thereby forming a first pattern; d) forming a second pattern in the first pattern by laser cold laser ablating of the first pattern with a UV excimer laser emitting between 222 nm and 308 nm.
US10705402B2
Methods, systems and apparatuses are presented for controlling ambient light transmission through electrochromic devices comprising a plurality of dimmable zones.
US10705400B2
A reflecting cell including at least two substrates each covered by an electrode and facing each other, the substrates delimitating between them a volume which separates them and which is filled with a bistable liquid crystal-type material with a threshold field, for example a cholesteric liquid crystal, both electrodes being intended to be connected to a voltage source. This cell is characterized in that at least one of the electrodes is formed by associating a pattern, which does not entirely cover the surface of the substrate considered, and a conducting layer which covers the surface of the substrate considered, the conductivity of the material of the layer being lower than that of the material of the pattern.
US10705397B2
A liquid crystal display device includes: a plurality of scan lines and signal lines on one of a pair of substrates arranged to be opposed to each other with a liquid crystal layer sandwiched therebetween, the scan lines and signal lines extending in different directions; and an orientation film, pixel electrode, insulating layer and common electrode, the orientation film being rubbed in a rubbing direction having a given inclination with respect to a pixel arrangement direction. The pixel electrode is partitioned by the scan lines and signal lines and has subpixels made up of first and second regions. The first region has a plurality of slit-shaped openings having a given inclination in a first direction with respect to the rubbing direction. The second region has a plurality of slit-shaped openings having a given inclination in a second direction with respect to the rubbing direction.
US10705387B2
A substrate for a liquid crystal display device includes: a substrate; and an alignment film on the substrate, the alignment film including an alignment material of a photo alignment material and a conductive particle.
US10705386B2
A method for avoiding an image sticking effect includes acquiring a color tone status of an image during a predetermined time interval according to an input signal of a liquid crystal display panel, rotating pixel molecules of at least one region of a plurality of regions of the image by using a pixel inversion process when the color tone status is maintained at a steady state, and after the pixel molecules of the at least one region of the image are rotated, suspending the pixel inversion process of the image when the color tone status is changed from the steady state to an unstable state.
US10705370B2
An embodiment relates to a light emitting module, a light emitting module manufacturing method, a light emitting cabinet, and a display device. The display device of an embodiment includes: a support frame; and a plurality of light emitting cabinets including a plurality of light emitting modules disposed on the support frame, wherein the plurality of light emitting modules may include a substrate, a plurality of light emitting units directly mounted on the substrate, and a black matrix disposed on the substrate to surround each of the plurality of light emitting units. The embodiment may implement uniform color and uniform brightness by providing a light emitting module providing full color, and may implement slimness and high brightness by simplifying a configuration of the light emitting module in a chip on board (COB) type. The embodiment may implement low power driving and improve productivity and yield by simplifying the configuration of the light-emitting module.
US10705357B2
A display substrate including a base substrate and an optical functional layer provided on the base substrate. The optical functional layer includes a black matrix providing a plurality of first shading strips and a plurality of second shading strips. The plurality of first shading strips intersect with the plurality of second shading strips so as to divide the display substrate into a plurality of pixel units. A thickness of the first shading strips is different from that of the second shading strips.
US10705352B2
An automated contact lens cleansing device configurable for performing a plurality of cleansing cycles having different characteristics. The device includes a storage unit configured for storing a cleansing solution. The cleansing device also include a first solution transfer line that, during operation of the device, transfers the cleansing solution from the solution storage unit to a reservoir, as well as a second solution transfer line that, during operation of the device, transfers the cleansing solution from a reservoir to a drain. During operation, the reservoir houses the contact lens for at least one cleansing cycle. The device also includes one or more memories storing instructions to perform at least one of the plurality of cleansing cycles and a processor that, when executing the stored instructions, controls at least one of the first solution transfer line, the second solution transfer line, and the housing for the at least one cleansing cycle.
US10705345B2
Trapezoidal protrusions, which protrude to the inside of a region, are provided on a right-side part and a left-side part of a mounting member. Holding sections, which extend in a circumferential direction, are formed in lateral surfaces of the trapezoidal protrusions. The holding sections include first holders which are opened to an upper side, and a second holder that is opened to a lower side. The first holders, and the second holder are respectively provided with second protrusions which protrude into a groove in a plural number, and can maintain the cable in a groove. First protrusions are respectively provided on rear-side ends to guide lead-out of the cable from the mounting member.
US10705340B2
A lens assembly and a method of making the assembly are described. The lens assembly includes a first lens and a second lens slidably coupled with the first lens. The second lens includes a silicone material and has a Fresnel pattern surface. Also described is a display device including the lens assembly and an array of light emitting devices coupled with the lens assembly for outputting light through the lens assembly.
US10705336B2
A head-up display assembly including a printed circuit board having a plurality of light emitting elements. A display element is illuminated by the plurality of light emitting elements. A total internal reflection (TIR) lens array includes a plurality of TIR lenses. Each one of the plurality of TIR lenses is aligned with a different one of the plurality of light emitting elements to reflect light emitted by the plurality of light emitting elements to the display element to illuminate the display element.
US10705333B2
A head-up display apparatus is provided which enables a wide viewing angle in spite of being a type that reflects image light on a windshield. Accordingly, a head-up display apparatus (110) includes an image formation unit (10) that displays image information, and a projection optical system that includes an eyepiece optical system 5 reflecting light emitted from the image formation unit (10) for display of a virtual image. The eyepiece optical system (5) includes a first optical element (51) having a negative refractive power, a second optical element (52) having a positive refractive power, and a concave reflecting mirror (54), and is configured to arrange the first optical element (51), the second optical element (52) and the reflecting mirror (53) in this order from the image formation unit.
US10705330B2
A lens includes a lens body comprising a cylindrical surface along an optical axis direction and a fixed portion radially outwardly protruding from the lens body, comprising a diameter diminishing more and more from an image side toward a subject side along an optical axis of the lens body, and including an inclined surface contiguous to the cylindrical surface of the lens body.
US10705328B2
A laser light source device of the present invention is disclosed. More specifically, the present invention relates to a laser light source device for emitting a deflected light so as to form a specific shape by outputting a laser beam through a point light source, and a parking indicator light system including the same. According to an embodiment of the present invention, an indicating line according to a road shape is projected and displayed on a road surface within an underground parking lot such that a driver may easily recognize traveling and parking directions of a vehicle on a road with a limited road width, narrow view, and dim illumination.
US10705314B2
A collimator lens system includes a first lens, a second lens, a third lens and a diaphragm from an object side to an image side of the system in turn along an optical axis, in which the first lens is of a positive focal power, and an object side surface thereof is convex; the second lens is of a negative focal power; the third lens is of a positive focal power, and an image side surface thereof is convex; optical centers of all the lenses are arranged along a same straight line, the system meets following formulas: f12>f3; (dn/dt)1<−50×10−6/° C.; (dn/dt)2<−50×10−6/° C.; (dn/dt)3>−10×10−6/° C., where f12 represents a combined focal length of the first and second lenses, f3 represents a focal length of the third lens, and (dn/dt)1, (dn/dt)2, and (dn/dt)3 represent change rates of refractive indices of the first lens, the second lens and the third lens with temperature, respectively.
US10705297B2
A method of launching a spacecraft into low Earth orbit using a non-line-of-sight optical power transfer system. The method includes generating optical power at a base station and using an optical fiber to transmit the optical power generated to a launch vehicle via an actively cooled fiber spooler thereon. The optical power received by the launch vehicle is converted to another form of energy usable by the launch vehicle. The optical power is optically focused into a reaction chamber to impinge on a refractory target. A working fluid is regeneratively fed to a heat exchanger contained within the actively cooled fiber spooler. The working fluid is pre-heated within the heat exchanger and injected into the reaction chamber where the working fluid heats and expands. The exhaust is channeled through a rocket nozzle to produce thrust. In an alternative embodiment, the optical fiber expended during launch of a spacecraft is recovered.
US10705286B2
A backlight assembly includes a substantially planar light guide defining an upper, lower, and first side surface. A first plurality of LEDs is positioned to emit light into the lower surface. A NVIS filter is placed adjacent to, and a second plurality of LEDs is positioned near to, the first side surface. A directing element extends between the second plurality of LEDs and the NVIS filter and directs the emitted light from the second plurality of LEDs through the NVIS filter and into the light guide. The NVIS filter extends substantially perpendicular from a support structure associated with the light guide.
US10705282B2
The present disclosure provides a backlight module and a liquid crystal display using the same. The backlight module includes a light guide plate, a light source and a plurality of light extraction gratings. The light source is disposed at an end of the light guide plate. A plurality of light extraction gratings are disposed on a light emission surface of the light guide plate, and are arranged in an array. The plurality of light extraction gratings are divided into a plurality of regions arranged at equal intervals in a direction from the end of the light guide plate near the light source to another end of the light guide plate away from the of the light source, a gap between adjacent columns of two adjacent regions is a+b, where a is a gap between adjacent columns in the same region and b is a width of one light extraction grating.
US10705280B2
A light source module includes: a convergent beam generating unit which generates, based on a pump beam emitted from a light source, a convergent pump beam having a beam size that decreases as the convergent pump beam propagates; a light guide body inside which the convergent pump beam, having been generated by the convergent beam generating unit, propagates; an extraction part which causes the convergent pump beam, having propagated inside the light guide body, to exit from the light guide body; and a wavelength conversion element which converts a wavelength of the convergent pump beam, being incident on the wavelength conversion element through the extraction part, and emits, through the light guide body, the convergent pump beam whose wavelength has been converted.
US10705279B2
A display device includes a display component, a light source, and a light guide component. The display component includes a display area and a non-display area. The light guide component includes a first light guide plate disposed behind the display area, a second light guide plate disposed adjacent to the light source and lateral to the first light guide plate, and a joint member disposed behind the non-display area. The first light guide plate includes a plate surface with an area larger than the display area. The plate surface includes a light exiting surface. The second light guide plate includes a light entering surface. The joint member joins the first light guide plate and the second light guide plate together. A space is present between the first light guide plate and the second light guide plate and surrounded by the joint member.
US10705270B2
A display panel and a display are provided. The display panel includes a first base-plate and a second base-plate which are oppositely disposed. The first base-plate includes a black matrix and a first spacer. The black matrix has a first black matrix area corresponding to the first spacer. The first base-plate or the second base-plate includes a first light shielding pattern. The projection of at least a part of the first light shielding pattern on the first base-plate is located on at least one of two sides of the projection of the first black matrix area on the first base-plate along a rub alignment direction.
US10705269B2
An integrated optical device that combines a diffractive optical element (DOE) to provide beam combining for coherent beams and a spectral beam combination (SBC) grating to provide beam combining for incoherent beams. The device includes a planar substrate and a reflective coating deposited on the substrate. A top dielectric layer is deposited on the reflective coating and a photoresist layer is deposited on the top dielectric layer. A periodic structure is formed into the top dielectric layer in a first direction that defines the DOE and a periodic grating having grooves is formed into the top dielectric layer in a second direction substantially orthogonal to the first direction that defines the SBC grating where the periodic structure includes periodic modulations along the length of the grooves that are orthogonal to a channel-to-channel periodicity of the periodic grating.
US10705262B2
A lens includes immobilized liquid crystals. The liquid crystals in a first region are aligned in a first orientation. The liquid crystals in a second region, located between the first region and a third region and adjacent to the first region and the third region, are aligned in a second orientation that is distinct from the first orientation. The liquid crystals in the third region, located between the second region and a fourth region and adjacent to the second region and the fourth region, are aligned in the first orientation. The liquid crystals in the fourth region, located adjacent to the third region, are aligned in the second orientation. A device with the lens and an array of light emitting devices is also disclosed.
US10705259B2
An optical element includes a substrate, and an antireflection film formed on the substrate and including a plurality of layers. The optical element satisfies predetermined conditions.
US10705258B2
An antireflection film includes a light shielding layer which is placed on a substrate and contains an electrical conductor, a first transmission layer which is placed on the light shielding layer and contains a dielectric, a semi-transmission layer which is placed on the first transmission layer and contains an electrical conductor, and a second transmission layer which is placed on the semi-transmission layer and contains a dielectric, wherein the light shielding layer and the semi-transmission layer have a larger extinction coefficient than the first transmission layer and the second transmission layer.
US10705256B2
Aggregating and transforming data, and performing analytics thereupon, for application-specific optimization based on multiple data sources. The data is preferably ingressed automatically, and may originate from various public and/or private data sources. Data transformation preferably aligns the data aggregated from the various sources, to thereby allow meaningful referencing. Complex and non-aligned data can therefore be consolidated, such that it is readily digestible by simulation (or other) software. In an embodiment, risk of flooding for a supply chain is computed from the aggregated and transformed data, using data analytics based on physical computation for flood risk assessment, allowing the supply chain to be optimized with regard to threat of flooding and/or actual flooding. In another embodiment, risk of wild fire may be assessed. Other types of risk may also be assessed.
US10705252B2
A Paleo Event Table creator tool box is described which is induced and/or allows a user to spatially join a selected area of interest of the earth crust to one selected tectonic plate in a tectonic plate model, which selected tectonic plate has an overlap with the area of interest, and to sample a paleogeographic dataset relevant to the area of interest for a series of paleogeographic time steps. A graphical user interface is induced and/or allows the user to create a Paleo Event Table that displays the sampled paleogeographic dataset. The Paleo Event Table creator tool box is used for paleogeographic reconstruction of the earth crust in the area of interest and identifying information relevant for the area of interest.
US10705247B2
A borehole fracture evaluation tool for imaging radiation emitted by radioactive materials injected into the formation during hydraulic fracturing operations, the tool including at least one collimated imaging detector used to record x-ray backscatter images; sonde-dependent electronics; and a plurality of tool logic electronics and power supply units. A method for fracture evaluation imaging, the method including at least injecting radioactive tracer materials into the formation fractures; controlling the imaging direction of an imaging array detector; imaging the fracture structures; creating a composite image of the fractures versus the formation; and determining the size and position of the fractures.
US10705245B2
Imaging systems and methods are provided for detecting objects that may be hidden under clothing, ingested, inserted, or otherwise concealed on or in a person's body. An imaging assembly, e.g., X-ray source and X-ray detector, and mechanisms, e.g., a translational mechanism for vertically moving the imaging assembly, may be configured to reduce the overall form factor of such imaging systems, while still retaining an ability to perform full/complete imaging of a subject.
US10705237B2
Disclosed is a method for characterizing the evolution of a subsurface volume over time. The method comprises providing a first and second surveys of the reservoir with a first and second sets of seismic traces, performing an inversion to obtain estimates of changes having occurred between said first time and said second time in terms of at least one model parameter; wherein the subsurface volume is divided into regions according to a high order discrete classification attributed in accordance with the region's geologic characteristics, and said inversion is constrained per region of subsurface volume. The regions of subsurface volume may be geological layers.
US10705234B2
Embodiments of the present disclosure include one or more of a method, computing device, computer-readable medium, and system for statistical line and edge detection and/or enhancement. An example embodiment of the present disclosure may include a method that includes identifying a plurality of data values related to a first object defined by a first plurality of points within the volume, wherein the first object intersects a second object defined by a second plurality of points within the volume; calculating a statistical significance statistic related to the second object; interpolating a P-value related to the statistical significance statistic; and determining a significant P-value taken over the second object, wherein the significant P-value comprises a minimum P-value that provides a maximum negative log(P(statistical significance statistic)).
US10705233B2
There is described embodiments relating to a method of determining a wave field in an anisotropic subsurface of the Earth. The method includes numerically solving a decoupled quasi-acoustic single wave mode wave equation based on spatially varied anisotropic parameters, to determine the wave field in the anisotropic subsurface.
US10705230B2
The invention achieves preventing from moisture penetration into an imaging panel without deterioration in detection accuracy of scintillation light. An imaging panel includes an active matrix substrate having a plurality of pixels each provided with a photoelectric conversion element, a scintillator provided on a surface of the active matrix substrate, a damp-proof material covering the active matrix substrate and the scintillator, and an adhesive layer bonding the damp-proof material to the scintillator and the active matrix substrate. The active matrix substrate includes a first flattening film overlapped in a planar view with the scintillator and configured as a photosensitive resin film. The first flattening film is entirely disposed, in a planar view, inside an adhesive layer region provided with the adhesive layer.
US10705228B2
An apparatus is disclosed herein comprising one or more optically reflective materials, one or more electrodes, one or more photodetecting materials, and one or more substrates. At least one optically reflective material is electrically insulating, and the electrodes are positioned adjacent to the insulating optically reflective material. Additionally, the photodetecting materials are positioned on the substrates and are adjacent to the one or more electrodes. A method is disclosed comprising providing one or more photodetecting materials positioned on one or more substrates, placing one or more electrodes adjacent to the photodetecting materials, and placing one or more optically reflective materials adjacent to the electrodes and/or substrate. At least one optically reflective material is electrically insulating, and the insulating optically reflective material is placed adjacent to the electrodes. A method is also disclosed comprising providing an apparatus as above and using the apparatus.
US10705217B2
An apparatus for controlling a plurality of imaging sensor nodes producing 3D structure of a scene is provided. The apparatus receives (500) location data from the sensor nodes, the location data indicating the locations of the moving objects, compares (502) the location data received from different sensor nodes at the same time instants with each other and determines (504) which detections of different sensor nodes relate to same moving objects. The apparatus further maps (600) the location data received from different sensor nodes to a common coordinate system and determines (602) the relationships of the fields of view of the sensor nodes with each other and the location data mapped to the common coordinate system.
US10705215B2
An distance measurement apparatus includes a light source to emit irradiation light, circuitry to output, to the light source, a first current that changes in accordance of light-emission timing information defining at least turn-on timing of the light source, and a second current that does not change in accordance of the light-emission timing information, a sensor to detect reflection light reflected from an object irradiated with the irradiation light emitted from the light source. The circuitry calculates a distance to the object based on a detection amount of the reflection light detected by the sensor.
US10705208B2
During a location technique, a sensor module in a vehicle, which has non-retractable wheels in contact with a driving surface, determines a location of the vehicle. In particular, the sensor module is positioned on or in a direction of a side-facing surface of the vehicle. Moreover, during operation, the sensor module may transmit radar signals approximately perpendicular to a direction of motion of the vehicle. Then, the sensor module may receive reflected radar signals. Furthermore, the sensor module may analyze a time sequence of the reflected radar signals. Next, the sensor module may determine the location of the vehicle based at least in part on the analyzed time sequence of reflected radar signals.
US10705184B2
When a combination of a plurality of sensors is used for obstacle detection, the present invention is to detect the relative positions of the sensors, to correct inter-sensor parameters, and to provide accurate obstacle detection. This calibration system is provided with a first landmark detecting unit for detecting the position of a first landmark from three-dimensional shape information; a landmark associating unit for determining a correspondence relation, between the first landmark position detected by the first landmark detecting unit and an attachment position to the vehicle of the first landmark estimated by a vehicle landmark relative position estimating unit; and a vehicle sensor relative orientation estimating unit for estimating the relative position and orientation of the vehicle and a first measurement section based on the information from the vehicle landmark relative position estimating unit and a landmark associating unit.
US10705176B2
Systems and methods are provided for determining a direction of a signal received at an antenna array. An antenna array includes a plurality of antenna elements, including a reference element. A signal combiner element is configured to combine weighted signals from a subset of the plurality of antenna elements to provide a composite output. An adaptive processing component is configured to determine an optimal set of weights for the subset of the plurality of antenna elements. An angle of arrival search component is configured to find a direction of minimum gain given the optimal set of weights.
US10705173B2
A system, a method, and a computer program product are provided. At predetermined times, a processing element processes a new vector represented by a last received magnetic measurement from a magnetometer and indicating a direction and a magnitude of a sensed magnetic field. When the new vector satisfies multiple criteria, the new vector is added to a determined vector set. The processing element processes multiple magnetometer measurements using a Monte Carlo best fit determination and modal partitioning to produce new calibration parameters that define a calibration sphere. The new calibration parameters are applied and stored in a memory element when at least a predetermined number of vectors are consecutively added to the determined one of the multiple vector sets.
US10705160B2
A method of compensating for an effect of temperature includes providing a set of magnetic sensors arranged along a sensing path. Each magnetic sensor is adapted to sense a magnetic field created by a magnetic actuator which can move along the sensing path and to provide a sensing signal indicative of a position and/or a displacement of the magnetic actuator relative to the sensing path. The method includes selecting one or more magnetic sensors from the set of magnetic sensors for use as temperature sensors, estimating a distribution of temperature over at least a portion of the sensing path based on the sensing signals output by the one or more magnetic sensors selected as temperature sensors, and compensating for the effect of temperature on the sensing signals output by one or more magnetic sensors of the set of magnetic sensors using the distribution of temperature that was estimated.
US10705150B2
A remaining battery charge measuring circuit for measuring remaining charge of a battery, includes: an LC circuit including an inductance element and a capacitance element; and a switch element that controls coupling between the battery and the LC circuit, wherein the switch element disconnects the LC circuit from the battery, based on a resonant frequency by the LC circuit.
US10705148B2
A semiconductor device includes: a boosting section configured to output a second voltage boosted from a first voltage; a voltage lowering section configured to output a lowered voltage that has been lowered from the second voltage by a predetermined voltage; a first buffer amp including a non-inverting input terminal connected to an output of the voltage lowering section; a second buffer amp including a non-inverting input terminal that is input with the first voltage; and a difference output section configured to output a voltage corresponding to a difference between output of the first buffer amp and output of the second buffer amp.
US10705146B2
A battery state-of-charge estimation apparatus includes: a storage that stores a charge SOC-OCV curve, a discharge SOC-OCV curve, and internal-division-ratio information; and a state-of-charge estimation unit, wherein: when a capacity difference between a battery before and after charging when the battery is charged when an intersection point is on the discharge SOC-OCV curve or when a capacity difference between the battery before and after discharging when the battery is discharged when an intersection point is on the charge SOC-OCV curve is less than a threshold, the state-of-charge estimation unit references the internal-division-ratio information to determine an internal division ratio; and the state-of-charge estimation unit estimates the state of charge of the battery using the determined internal division ratio, the open-circuit voltage of the battery after elapse of a predetermined time period since the end of charging or discharging, the charge SOC-OCV curve, and the discharge SOC-OCV curve.
US10705144B1
Systems and methods for monitoring operating conditions of a programmable device are disclosed. The system may include a root monitor configured to generate a reference voltage, a plurality of sensors distributed across the device, and a plurality of satellite monitors distributed across the device. Each of the satellite monitors may be coupled to a corresponding sensor via a local interconnect, and may be configured to convert analog signals generated by the sensor into digital data indicative of one or more operating conditions of an associated circuit. In some implementations, each satellite monitor may include a circuit to store a local reference voltage, an analog-to-digital converter (ADC) to convert the analog signals into digital codes, a calibration circuit to generate a correction factor indicative of errors in the digital codes, and a correction circuit to correct the digital codes based on the correction factor.
US10705142B2
Techniques and mechanisms for providing on-chip link control functionality to facilitate emulation of a communication. In an embodiment, an integrated circuit (IC) chip includes a physical layer (PHY) which supports communication compatible with a high-speed serial interface standard. A link controller of the IC chip is coupled between the PHY and an interconnect architecture which variously couples a host and other resources of the IC chip to each other. A test controller of the IC chip signals a test mode to implement a loopback path of the link controller in lieu of one or more functional paths for communication with the PHY. In another embodiment, signal output by the loopback path emulate a communication from a resource other than the test controller.
US10705134B2
An apparatus, multi-layer semiconductor substrate and system for testing a high-speed signal through a printed circuit board is provided. Embodiment of the present invention provides an apparatus comprises a multi-layer substrate, one or more transmission lines disposed within the multi-layer substrate, one or more connectors attached to the multi-layer substrate for connecting one or more test cards, a lid, comprising one or more cutouts for the one or more connectors, a clamp for compressing the multi-layer substrate against the lid, and one or more high-speed connectors attached to the one or more test cards, respectively.
US10705126B2
A system for energy metering with temperature monitoring that includes a plurality of current sensors, suitable to sense a changing current in a respective power cable, that provide a respective first output. The energy metering system includes a support and current sensors interconnected to the support at spaced apart locations along the support. A temperature sensor that provides a second output and is interconnected to the support. The energy metering system receives the respective first output and the second output and determines characteristics of the energy system based upon the second output.
US10705123B2
A SiC semiconductor device is provided that is capable of improving the detection accuracy of the current value of a principal current detected by a current sensing portion by restraining heat from escaping from the current sensing portion to a wiring member joined to a sensing-side surface electrode. The semiconductor device 1 includes a SiC semiconductor substrate, a source portion 27 including a principal-current-side unit cell 34, a current sensing portion 26 including a sensing-side unit cell 40, a source-side surface electrode 5 disposed above the source portion 27, and a sensing-side surface electrode 6 that is disposed above the current sensing portion 26 and that has a sensing-side pad 15 to which a sensing-side wire is joined, and, in the semiconductor device 1, the sensing-side unit cell 40 is disposed so as to avoid being positioned directly under the sensing-side pad 15.
US10705121B2
A continuity testing and cleaning fixture includes a continuity test area disposed on a portion of a first surface of the fixture, wherein the continuity test area comprises an upper region comprising at least 99.99 wt % tungsten. The continuity testing and cleaning fixture may be used in a method involving contacting at least two conductive elements of a probe card with a continuity test area of a continuity testing and cleaning fixture, wherein the continuity test area comprises an upper region comprising at least 99.99 wt % tungsten; determining an electrical resistance between the at least two conductive elements; and cleaning the at least two conductive elements with at least one cleaning zone of the continuity testing and cleaning fixture in response to determining the electrical resistance to be above a first threshold.
US10705110B2
A system and method for predicting aircraft nonlinear instability includes the steps of: (1) a pre-built aircraft state parameters for all possible flight conditions, (2) real time measuring flight parameters to determine aircraft state, (3) calculating the inertial coupling frequencies and periods as well as the nonlinear instability threshold based on the nonlinear instability theory recently developed by the inventor, (4) providing a first warning signal if the threshold is approached, (5) providing a second warning signal if the threshold has been exceeded.
US10705108B1
Sensing systems and methods for sensing a stationary individual. A sensing system may use a first sensor to determine whether a detected thermal signature is associated with a human presence within a space. When the detected thermal signature is not associated with a human presence, the sensing system may repeat the determining whether a detected thermal signature is associated with a human presence. When the detected thermal signature is associated with a human presence, the sensing system may determine whether motion has been detected using a second sensor. In some cases, the first sensor may be a thermal sensor that can detect a human whether the moving or not, and the second sensor may be a motion sensor that only detects motion.
US10705100B1
Methods for accurately comparing the levels of ionizable lipids in two cell populations that differ in some respect from each other using mass spectroscopy and isotopic labeling are provided. The methods can be used to identify a change in a lipid of interest in response to a cellular, chemical, genetic, or environmental change to the cell population (i.e., a lipid response to a cell perturbation). The change in the lipid of interest can be a change in composition, rate of synthesis, and/or location of the lipid.
US10705099B2
The present invention relates to new probes and methods for determining the concentration of copper. In particular the present invention refers to a method for determining the concentration of “free” copper in a serum or blood sample with a high degree of sensitivity and accuracy.
US10705084B2
Devices and methods for the detection of analytes are disclosed. Devices and methods for detecting food-borne pathogens are disclosed.
US10705081B2
Methods and compositions for the detection and quantitative measurement of biomarkers and other target analytes by determining impedance in bodily fluid samples and/or environmental samples using compositions comprising a base substrate with electrodes, a nanoporous membrane placed on top of the nanoporous membrane, O-rings placed on top of the nanoporous membrane and a manifold placed on top of the O-rings. Such a composition may be placed in a testing platform to ensure the application of constant, repeatable pressure to the composition.
US10705075B2
An apparatus comprising: a channel (4) configured to conduct charge carriers; and a charge carrier generator (22) configured to generate charge carriers for populating the channel, wherein the charge carrier generator is configured for resonance energy transfer (FRET). The charge carrier generator may be a nanoparticle or quantum dot (22), functionalised with at least one moiety (28A, 28B) to enable detection of an analyte. The charge carrier generator may also be a nanoparticle or quantum dot (22) configured to photo-generate charge carriers. The channel (4) may be made of a material having a very high carrier mobility like graphene or carbon nanotubes.
US10705069B2
Consolidated porous media samples and methods for their manufacture are described herein. An assembly has an outer tube having a first softening temperature and a sintered glass construct formed from plurality of beads of multiple sizes. The sintered glass construct defines pores and at least one fracture or channel. The assembly is formed by suspending at least one sheet or wire of dissolvable material in the outer tube, packing beads of different sizes around the sheet or wire, sintering the beads with the sheet or wire located therein at a temperature below the softening temperature of the tube, and dissolving the sheet or wire to generate a sintered construct defining at least one fracture or channel.
US10705062B2
In some embodiments, the present disclosure pertains to substance detecting assemblies that include: (1) a sample medium (e.g., filter paper); and (2) a solid test chemical (e.g., zinc) impregnated with the sample medium. In some embodiments, the present disclosure pertains to methods of making an assembly for detecting a substance by: (1) providing a sample medium; (2) providing a solid test chemical; and (3) impregnating the sample medium with the solid test chemical. In further embodiments, the present disclosure pertains to methods for detecting a substance by: (1) collecting the substance on a sample medium that is impregnated with a solid test chemical; and (2) initiating a reaction of the substance with the solid test chemical on the sample medium to generate a color that corresponds to the substance. In some embodiments, the sample medium is then inserted into a chemical detection unit for the detection of the substance.
US10705061B2
A rapid flow-through, highly sensitive microfluidic photoionization detector (PID) which is micro-fabricated directly onto a substrate, such as a conductive silicon wafer, is provided. The microfluidic PID has an ionization chamber volume of less than 9 μL. The microfluidic PID may have a flow through design with a microfluidic channel defines a serpentine pattern on the substrate. The flow through design of the microfluidic PID results in negligible dead volume, thus allowing a shortened response time over existing commercially available designs. Such microfluidic PIDs are particularly useful with gas chromatography (GC), including microGC and multi-dimensional microGC systems. Methods for calibrating PIDs are also provided.
US10705054B2
The invention relates to non-destructive ultrasonic testing of flat-bottom rails, laid on track, and can be used for detection of defects in tips of the rail foot on aluminothermic welded joints, performed by the intermediate casting method.During the ultrasonic testing of aluminothermic welded joints, at least two zones for ultrasonic testing were determined with selecting one of at least two zones on the weld bead (reinforcing bead) from the lateral surface of the tip of the rail foot. At least two specific zones are grinded on the weld collar (reinforcing collar) with creation of at least two flat areas, which are able to ensure acoustic contact. The ultrasonic transducer is placed on every flat area of the collar, which is connected to at least one ultrasonic flaw detector. Ultrasonic testing of weld is performed using at least one flaw detector Delta-method or echo-method.As a result of the invention implementation, there is no any “blind zone” in the base of the rail welded joint. The described invention ensures higher accuracy in detection of welds defects within the tips of the rail foot area. 2 z.p. f-ly, 8 il.
US10705053B2
The present disclosure provides an aerosol sensing method. The aerosol sensing method includes steps of providing an entering process, providing a particle collecting process and providing a measuring process. The entering process is to allow an aerosol to enter a chamber of a thermal-piezoresistive oscillator-based aerosol sensor, and a thermal-piezoresistive resonator is disposed in the chamber. The particle collecting process is to allow particulate matters in the aerosol to land on at least one proof-mass of the thermal-piezoresistive resonator when the thermal-piezoresistive resonator is not driven. The measuring process is to use an electrical signal to drive the thermal-piezoresistive resonator and measure a resonant frequency of the thermal-piezoresistive resonator. The particle collecting process and the measuring process are operated in a repetitive cycle for measuring changes of the resonant frequency of the thermal-piezoresistive resonator to measure the particulate matters of the aerosol.
US10705051B2
Circumferential and axial magnetizers for a magnetic flux leakage pig. A circumferential magnetizer module for a smart pig comprises a central shaft and at least one magnet bar for inducing a magnetic field transverse to a longitudinal axis of the shaft. The magnet bar comprises at least one magnet, and may collapse radially inward to the shaft. A sensor head disposed between circuit poles at each polar end of the magnet monitors magnetic flux. An axial magnetizer module comprises a central shaft and at least one magnet bar to induce a magnetic field coaxially to a longitudinal axis of the shaft. Magnets of opposite polarity are circumferentially disposed around ends of the central shaft. A sensor head disposed between circuit poles at each polar end monitors magnetic flux. The central shaft of a circumferential magnetizer or axial magnetizer may comprise a joint linking an additional smart pig module.
US10705042B2
A mobile device comprises a first sensor configured to acquire information for determining whether the device is in the water, a second sensor configured to acquire information for determining whether the device is in a state of being on-board, and at least one controller configured to perform control not to execute processing to determine whether the device is in the state of being on-board when the device is determined to be in the water, and to perform control to execute the processing to determine whether the device is in the state of being on-board when the device is not determined to be in the water.
US10705041B2
A combustible gas sensor including a first sensing element having a catalyst and a heating element and electronic circuitry in operative connection with the heating element of the first sensing element to change a temperature thereof between a temperature above a temperature to catalyze oxidative combustion and a temperature at which the catalyst is substantially inactive to catalyze oxidative combustion of a plurality of gas analytes of interest. The electronic circuitry being configured to determine a species of at least one of the plurality of gas analytes of interest from a first, dynamic output of the combustible gas sensor while the temperature of the first sensing element is changing. The electronic circuitry further being configured to determine a concentration of the species from a second output of the combustible gas sensor.
US10705040B2
We disclose herein a method for heating a gas sensing material formulation on a microhotplate which comprises: a dielectric membrane formed on a semiconductor substrate comprising an etched portion; and the gas sensing material formulation being located on one side of the dielectric membrane. The method comprising: selectively heating the gas sensing material formulation using an infra-red (IR) heater located over the substrate, and controllably cooling the semiconductor substrate using a cooling baseplate provided under the substrate and using an insulating medium located between the substrate and the cooling base plate so that a gas sensing structure is formed on said one side of the dielectric membrane from the gas sensing material formulation.
US10705034B2
A method for detecting surface impurities on a surface of a component by X-ray fluorescence analysis uses a hand spectroscope for application to the surface of a component. The hand spectroscope comprises an X-ray source, a fluorescent radiation detector, an analyzer and a display. The method comprises irradiating the surface of the component with X-rays using the X-ray source; detecting fluorescent radiation, which is emitted by the surface of the component as a result of the irradiation with the X-rays, using the fluorescent radiation detector; measuring a radiation spectrum of the detected fluorescent radiation; generating an evaluation result by analyzing the measured radiation spectrum using the analyzer, the evaluation result comprising a quantitative measure of the surface impurity of the surface due to predetermined characteristic substances; and outputting the generated evaluation result on the display.
US10705032B2
An x-ray inspection device includes an x-ray irradiation unit that irradiates an object for inspection with an x-ray; a sensor that detects an electric signal corresponding to a back-scattered x-ray reflected off the object for inspection; a measurement unit that measures the object for inspection with reference to the electric signal output by the sensor; and a heavy metal plate having a pinhole that allows the back-scattered x-ray to pass therethrough, the pinhole forming an image of the back-scattered x-ray on the sensor.
US10705030B2
Provided is an x-ray device capable of suppressing reduction in detection precision. The X-ray device irradiates x-rays on an object and detects X-rays that pass through the object. The X-ray device comprises: an X-ray source that emits X-rays; a stage that holds the object; a detection device that detects at least some of the x-rays that have been emitted from the X-ray source and have passed through the object; a chamber member that forms an internal space wherein the X-ray source, the stage, and the detection device are arranged; and a partitioning section that separates the internal space into a first space wherein the X-ray source is arranged and a second space wherein the detection device is arranged.
US10705029B2
In an inspection apparatus, light source parts for irradiating an object area on a surface of an object with light from directions, respectively, are provided, and a first picked-up image representing an object area is acquired in one image pickup part by light irradiation from one of the light source parts and a second picked-up image is acquired in the image pickup part by light irradiation from the light source parts. A first defect candidate area is detected by comparing the first picked-up image with a first reference image corresponding to the first picked-up image and a second defect candidate area is detected by comparing the second picked-up image with a second reference image corresponding to the second picked-up image. An overlapping area in the first defect candidate area and the second defect candidate area is specified as a defect area in the object area.
US10705028B2
In order to inspect a substrate, an image information of a substrate before applying solder is displayed. Then, at least one inspection region on the substrate is image-captured to obtain an image of the inspection region that is image-captured. Then, image information that is to be displayed is renewed and the renewed image information is displayed. And, in order to inspect a foreign substance, obtained image of the inspection region is compared with a reference image of the substrate. Therefore, an operator can easily catch a region corresponding to a specific region of the image that is displayed, and easily detect a foreign substance on the substrate.
US10705009B2
Described are systems and methods for optical characterization of inclusions, such as solids and liquids, in liquid samples. An inclusion characterization system may include a radiation source, a radiation detector, a sample optical cell, and a sample delivery mechanism. The radiation detector may be configured to perform time resolved measurements. The sample may be delivered to the sample optical cell by the sample delivery mechanism at a flow rate set for preserving the sample integrity (i.e., the transport rate). The inclusion characterization in the sample may be performed at flow rates set for sample analysis (i.e., the analysis rate). The analysis rate may differ from the transport rate. The rate difference may be achieved by diverting only a portion of the overall sample into the sample optical cell. Also provided are examples of disengagement of sample transport and analysis flow rates.
US10705007B2
A flow cytometry system and method for quantification of fluorescently labeled virus particles smaller than 1 micron in size measures and controls sample fluid flow rate to an investigatory flow cell at a rate below 5000 nanoliters per minute and calculates in real time particle concentration in the sample fluid using measured flow rated data flow rate data and with correction for sample fluid flow rate fluctuations.
US10704992B2
Methods, apparatuses and systems for facilitating automated or semi-automated collection of tissue samples cut by a microtome. In one example, a collection apparatus may be moved back and forth between respective positions at which the collection apparatus is operatively coupled to a microtome so as to collect cut tissue samples, or routine access to the microtome is provided. Relatively easy movement and positioning of the collection apparatus is facilitated, while at the same time ensuring structural stability and appropriate alignment and/or isolation between the collection apparatus and the microtome. A fluid reservoir receives samples cut by the microtome, and the collection apparatus may collect samples via a conveyor-like substrate disposed near/in the reservoir. A linear movement of the substrate may be controlled based on a cutting rate of the microtome, and the fluid level in the reservoir may be automatically maintained to facilitate effective sample collection.
US10704989B2
A method of monitoring a gas turbine engine includes the steps of: (a) receiving information from actual flights of an aircraft including an engine to be monitored, and including at least one of the ambient temperature at takeoff, and internal engine pressures, temperatures and speeds; (b) evaluating the damage accumulated on an engine component given the data received in step (a); (c) storing the determined damage from step (b); (d) repeating steps (a)-(c); (e) recommending a suggested future use for the component based upon steps (a)-(d). A system is also disclosed.
US10704985B2
A method for inspecting an intermittent connection type optical fiber ribbon includes: accumulating one-dimensional images in a width direction of the intermittent connection type optical fiber ribbon, arranged intermittently with connection parts that connect adjacent optical fibers by repeatedly capturing images of the intermittent connection type optical fiber ribbon along the width direction while moving the intermittent connection type optical fiber ribbon in a longitudinal direction; and creating a two-dimensional image of the intermittent connection type optical fiber ribbon by aligning the one-dimensional images in a second direction orthogonal to a first direction where pixels configuring the one-dimensional image are aligned.
US10704984B2
A system for evaluating the modulation transfer function (MTF) of a device under test is provided. The system includes an image projector configured to provide light in a pattern representing a desired image. The system further includes a lens configured to direct the provided light toward the device under test as a collimated beam. An image analysis component calculates the MTF for the device under test from the at least one image taken at the device under test and the known characteristics of the image projector and the lens.
US10704969B2
A stress sensor is provided, including a substrate and a bridge circuit disposed thereon. The bridge circuit is coupled between an output node and a ground node. The bridge circuit includes a first branch and a second branch, the first having a first resistor, R1, having a first orientation and coupled to a tuning resistor, Rtune, at a first intermediate node. The second branch includes a second resistor, R2, having a second orientation that is different from the first orientation, and coupled to a variable resistor, Rvar, at a second intermediate node. The bridge circuit includes an amplifier having a positive input terminal coupled to the second intermediate node, and a negative input terminal coupled to the first intermediate node. The amplifier generates a voltage output at the output node as a function of mechanical stress applied to the substrate. Rvar is non-linearly tunable based on the voltage output.
US10704961B2
The present disclosure discloses a temperature measuring apparatus, an electrical assembly, and a battery pack. The temperature measuring apparatus comprises a heat transfer element, a temperature measuring device, and a wiring board. The heat transfer element is arranged for being in heat conductive contact with an object to be measured. The temperature measuring device is provided in contact with the heat transfer element and arranged to be spaced from the object to be measured. The temperature measuring device is arranged for detecting a temperature of the object to be measured and may output a temperature signal. The wiring board is electrically connected with the temperature measuring device to receive and transmit the temperature signal outputted by the temperature measuring device. The present disclosure only requires a heat conductive contact between the heat transfer element and the temperature measuring device of the temperature measuring apparatus, thereby facilitating assembly. Compared with insulated isolation with the object to be measured by glue-filling after the single-core wire is connected with the temperature measuring device, the temperature measuring apparatus of the present disclosure greatly reduces the assembly procedures.
US10704959B2
Microbolometer is a class of infrared detector whose resistance changes with temperature change. In this work, we deposited and characterized Germanium Silicon Oxide thin films mixed with Sn (Ge—Si—Sn—O) for uncooled infrared detection. Ge—Si—Sn—O were deposited by co-sputtering of Sn and Ge—Si targets in the Ar+O environment using a radio frequency sputtering system. Optical characterization shows that the absorption in Ge—Si—Sn—O was most sensitive in the wavelength ranges between 2.5-3.7 μm. The transmission data was further used to determine the optical energy band gap (0.22 eV) of the thin-film using Tauc's equation. We also found the variations of absorption coefficient (6592305.87 m−1-11615736.95 m−1), refractive index (2.5-4.0), and the extinction coefficient (2.31-5.73) for the wavelength ranges between 2.5-5.5 μm. The thin film's resistivity measured by the four-point probe was found to be 142.55 Ω-cm and TCR was in the range of −4.9-−3.1 (%/K) in the temperature range 289-325K.
US10704958B2
A method for monitoring a high-temperature region of interest in a turbine engine (10) is provided. The method includes providing an internally-cooled stationary vane (12). The method may further include locating at least one monitoring port (14) in the stationary vane and operatively connecting a monitoring instrument (16) to the monitoring port to provide a field of view of a region of interest.
US10704952B2
The invention relates to a system for measuring vibration on a machine, with a carrier (14) for placing onto a measuring point (12) of the machine, a sensor (16) arranged on the carrier for detecting vibrations, an arrangement (16, 22, 28, 30) for detecting the electromechanical impedance of the sensor and also a monitoring device (22, 24, 26) for monitoring the current coupling of the carrier at the measuring point by means of evaluating the detected electromechanical impedance. The current coupling is in this case determined from the difference between the currently detected electromechanical impedance and the electromechanical impedance detected for a prescribed optimum coupling of the carrier to the measuring point.
US10704940B2
Disclosed is a device for mounting an ultrasonic transducer, suitable for mounting the transducer such that it extends through a wall of a flow meter having a channel in which a fluid flows; the device includes a body in communication with an inner surface of the channel in accordance with a closed contour line that forms an interface between the inner surface of the channel and a surface of the device body, referred to as active surface, which follows the shape of the inner surface of the channel. The active surface extends continuously, and without openings, in the area delimited by the contour line. Also disclosed is a flow meter using a mounting device of this kind.
US10704939B2
An apparatus and method for sensing a fluid flow passing within a pipe, which fluid flow comprises at least a first fluid phase. The apparatus includes a flow meter having an array of sensors and at least one processing unit, which flow meter is adapted to sense the fluid flow passing within the pipe as it travels past the array of sensors and produce signals indicative of the presence of vortical structures convecting with the fluid flow. The at least one processing unit is adapted to: (a) produce a k-ω plot using the signals indicative of the presence of vortical structures convecting with the fluid flow, and determine a k-ω plot quality parameter that indicates the presence or absence of a second fluid phase within a fluid flow passing within a pipe; or (b) determine a shape factor parameter indicative of a presence or absence of a second fluid phase within a fluid flow passing within a pipe; or (c) both (a) and (b).
US10704928B2
A proximity sensor and a method of changing a detection distance are provided to suppress changes in a consumption current of an oscillation circuit. The proximity sensor includes an oscillation circuit having an oscillation amplitude that changes with a feedback current, a comparing part comparing the oscillation amplitude with a threshold, a detecting part detecting a target object based on a comparison result of the comparing part, a voltage value signal generating part generating a voltage value signal based on the feedback current and the detection distance, a threshold setting part setting an analog signal converted from the voltage value signal as the threshold, a current value signal generating part generating a current value signal based on the detection distance and the voltage value signal, and a current value setting part setting an analog signal converted from the current value signal as a current value of the feedback current.
US10704916B2
A method, system, and computer program product is provided, for example, for matching a road sign observation information on a map application. The method may include receiving the road sign observation information. The method may further include identifying a plurality of candidate links based on a first distance between a location of the road sign observation information detection and a plurality of shape points. Additionally, the method may include calculating a heading difference between each of the plurality of candidate links and the location of the road sign observation information detection. Furthermore, the method may include identifying one or more qualified links from the plurality of candidate links, wherein the heading difference between each of the one or more qualified links from the plurality of candidate links and the location of the road sign observation information detection is within a predetermined heading difference threshold. Also, the method may include matching the road sign observation information to at least one of the one or more qualified links based on a second distance. Finally, the method may include changing the map-matched link from the candidate link to its downstream link if the road sign is too close to the end of the map-matched candidate link.
US10704915B2
A method performed by an infotainment providing system for providing driving situation based infotainment in a vehicle. The infotainment providing system determines a current position of the vehicle, determines from a digital map associated with the vehicle one or more road attributes of a current or subsequent road segment assumed or known to be ahead of the vehicle. The infotainment providing system selects, in consideration of the one or more road attributes, at least a first piece of media content from a media content source, and provides the at least first piece of media content in the vehicle.
US10704913B2
A positioning method using music pieces continuously provides positioning service. At each signature burst (i.e., a highly unique short musical segment suitable for positioning), sounds of a music piece are used for positioning. Between signature bursts, dead reckoning (DR) is used.
US10704910B2
An architecture is disclosed for an angular rate sensor that includes a duty-cycled phase shifter for generating a clock with high resolution delay for use in synchronized demodulation of a sensor output signal. In an embodiment, a sensor comprises: a mechanical resonator; a drive circuit coupled to the mechanical resonator and operable to actuate the mechanical resonator into resonant vibration; a sense circuit mechanically coupled to the mechanical resonator, the sense circuit operable to generate a sense signal having an in-phase signal component and a quadrature signal component; a demodulator circuit operable to receive the sense signal and a first clock for demodulating the sense signal to separate the in-phase signal component from the quadrature signal component; and a duty-cycled phase shifter coupled to the demodulator, the duty-cycled phase shifter operable to generate the first clock.
US10704905B2
Identifying and estimating values of atmospheric conditions for use in estimating an altitude of a mobile device. Systems and methods for monitoring one or more conditions before estimating an altitude of a mobile device may receive a reference pressure that was computed using a measurement of pressure from a first reference pressure sensor at a first location, wherein the received reference pressure specifies an estimated pressure for a reference altitude, and determine if a threshold change in measured pressure by the first reference pressure sensor is detected. If the threshold change in measured pressure is detected, the systems and methods may compute a calibration value for the first reference pressure sensor, or if the threshold change in measured pressure is not detected, the systems and methods may identify a previously-determined calibration value. The systems and methods may then compute an adjusted reference pressure using the received reference pressure and either the computed calibration value or the previously-determined calibration value, and compute an estimate of the altitude of the mobile device using the adjusted reference pressure and a measurement of pressure from the mobile device.
US10704904B2
A distance detection device includes a light source, a light guiding component, an image sensor and a processor. The light guiding component is disposed adjacent to the light source and includes a discontinuous surface. The light guiding component is adapted to project a beam emitted from the light source onto an object to form an illuminating pattern spotted by the discontinuous surface. The image sensor is adapted to capture an image about the object. The processor is electrically connected with the image sensor and utilized to analyze position variation of a spot formed by the discontinuous surface within the image for determining a distance of the object.
US10704902B2
Current GNSS-inclinable surveying pole systems rely on magnetometer sensors. The use of these types of sensor implies performance degradation when operating near magnetic fields. The invention provides a new approach to ranging pole systems, able to provide requested performance even when working near magnetic fields.
US10704897B2
The present invention provides a method for detecting a shape of a butt joint of a welded steel pipe. A specific detection range including a butt joint of a welded steel pipe is scanned with a non-contact means to obtain geometric coordinate data. Coordinates of a start point and an end point of the specific detection range, a first selected point located between the start point and the butt joint, and a second selected point located between the butt joint and the end point are selected from the geometric coordinate data. A first approximate circle including the start point, the end point, and the first selected point, and a second approximate circle including the start point, the end point, and the second selected point are calculated. A deviation between the first and the second approximate circles is used as an index representing the shape of the butt joint.
US10704896B2
Using the same image sensor to capture both a two-dimensional (2D) image of a three-dimensional (3D) object and 3D depth measurements for the object. A laser point-scans the surface of the object with light spots, which are detected by a pixel array in the image sensor to generate the 3D depth profile of the object using triangulation. Each row of pixels in the pixel array forms an epipolar line of the corresponding laser scan line. Timestamping provides a correspondence between the pixel location of a captured light spot and the respective scan angle of the laser to remove any ambiguity in triangulation. An Analog-to-Digital Converter (ADC) in the image sensor generates a multi-bit output in the 2D mode and a binary output in the 3D mode to generate timestamps. Strong ambient light is rejected by switching the image sensor to a 3D logarithmic mode from a 3D linear mode.
US10704890B2
A dynamic motion detection system including a plurality of active independent emitting elements, a signal capturing apparatus, and a computing apparatus is provided. The active independent emitting elements are suitable for being respectively affixed to different parts of a person to-be-tested and actively emitting positioning signals having preset wavelengths. The signal capturing apparatus is configured to capture the positioning signal of each of the active independent emitting elements and calculate a plurality of emitting coordinates according to the positioning signals. The computing apparatus is configured to control operation of the signal capturing apparatus and receive the emitting coordinates from the signal capturing apparatus. The computing apparatus defines a corresponding relationship between the emitting coordinates and the active independent emitting elements by comparing a geometry relationship among the emitting coordinates.
US10704889B2
A system and method for surface inspection of an object using optical coherence tomography (OCT) is provided. The method includes determining a first working distance; determining a first depth of field, based on the first working distance; changing the depth of field to the first depth of field; performing an A-scan of the object; moving the object; determining a subsequent working distance; determining whether the object is in focus at the subsequent working distance, if the object is not in focus: determining a subsequent depth of field based on the subsequent working distance; changing the depth of field to the first depth of field; and performing an A-scan of the object; and otherwise, performing an A-scan of the object.
US10704886B2
An embodiment relates to a curvature measurement apparatus. The apparatus includes a first curvature measurement unit configured to, upon a curvature of an object to be measured being relatively greater than a first curvature, measure the curvature of the object to be measured; and a second curvature measurement unit configured to, upon the curvature of the object to be measured being relatively smaller than a second curvature, measure the curvature of the object to be measured, the second curvature being relatively greater than or equal to the first curvature. The curvature measurement apparatus can improve an accuracy of a curvature of an object to be measured.
US10704865B2
Techniques are provided for a laser designation verification device and a method of laser designation verification using the device. The laser designation verification device includes: a lens to sense a first reflection, the first reflection coming from an encoded first laser beam reflecting off a first target; an electronic processing element to decode the sensed first reflection into a first code; and a portable electronic annunciator to provide identification of the first target to an operator of the device based on the decoded first reflection. The method includes: sensing a first reflection using the lens, the first reflection coming from an encoded first laser beam reflecting off a first target; decoding the sensed first reflection into a first code using the processing element; and providing, by the annunciator to an operator of the device, identification of the first target based on the decoded first reflection.
US10704862B2
A Next Generation Machinegun Sight (NexGen MGS) with a modular and universal design is discussed, whereby the NexGen MGS includes a lens body in a detachable manner; a display module disposed on a main body; a built in or standalone LRF connected into a ballistic computer to provide a disturbed reticle; a control switch or a remote control for fast and safe system operation without sacrificing combat grip; and multiple mounting rails disposed on the main body to accommodate the LRF, magnifiers, cameras and other equipment. The NexGen MGS is a reflex sight with a disturbed reticle that provides a range-adjusted aimpoint based on ballistics equations embedded within the MGS using a latest high resolution and sunlight readable display and laser range technologies.
US10704861B2
A cushioned article includes a cage and a compressible material. The cage has at least one opening, an interior volume, and an outer surface. The at least one opening provides a passage from the outer surface to the interior volume. The compressible material extends through the at least one opening in the cage. A method for manufacturing a cushioned article includes providing a mold having at least one cavity, placing a cage within the mold, and injecting a compressible material into an interior of the cage. The cage includes at least one opening. A portion of the compressible material flows through the at least one opening in the cage and fills the at least one cavity of the mold.
US10704849B2
Ammunition magazine comprises a follower having a pull receiving passage adapted to cooperate with a pull, the passage is defined by at least one passage wall that extends from an underside surface of the follower to a head engaging surface, a pull extends through the follower at the pull receiving passage through a port in the floor plate and has a head at a head end connected to a semirigid elongated body to a tail at a tail end, the body is adapted and sized to slide within the pull receiving passage of the follower, the head is larger than the pull receiving passage and adapted to engage with head engaging surface of the follower when the pull is pulled towards the floor plate to compress the follower spring and disengage from the head engaging surface of the follower when the pull is pushed into the loaded magazine.
US10704848B1
Provided is a firearm lower receiver configured to mate with an AR-pattern, auto-loading upper receiver assembly. The lower receiver has a body and a hinge mechanism having a fixed part integral to the lower receiver body and a moving part to which a buffer tube is mounted. The hinge is movable between an extended, operating position where the buffer tube is substantially aligned with the bolt carrier and a folded position. The fixed part includes a carrier blocking member movable between a blocking position where the blocking member prevents rearward movement of a bolt carrier in the upper receiver and a displaced position. The blocking member is spring biased toward the blocking position. A striker extends from the moving part and is configured to contact the carrier blocking member and move it against the spring bias to the displaced position when the hinge mechanism is in the extended, operating position.
US10704845B2
Methods are disclosed for fabricating heat exchangers and Heat Exchanger (HX) tubes, as are heat exchangers fabricated in accordance with such methods. In embodiments, the method includes the steps or processes of obtaining a Non-Equilibrium Alloy (NEA) feedstock powder comprised of an alloy matrix throughout which at least one minority constituent is dispersed. The first minority constituent precipitates from the alloy matrix when the NEA feedstock powder is exposed to temperatures exceeding a critical temperature threshold (TCRITICAL) for a predetermined time period. A cold spray process is carried-out to at least partially form the HX tubes from the NEA feedstock powder; and the HX tubes are subsequently installed in the heat exchanger. The HX tubes are exposed to a maximum temperature (TSPRAY_MAX) during the cold spray process, which is maintained below TCRITICAL to substantially preserve the non-equilibrium state of the NEA feedstock powder through cold spray deposition.
US10704829B2
A hydrocarbon stream, such as natural gas, is commonly cooled together with a first refrigerant stream, against an evaporating refrigerant in a series of one or more consecutively arranged common heat exchangers. The series comprises of one or more consecutively arranged common heat exchangers comprise a first common heat exchanger, upstream of which first common heat exchanger the hydrocarbon stream and the first refrigerant stream are not commonly cooled. The hydrocarbon stream to be cooled is fed into the first common heat exchanger at a hydrocarbon feeding temperature, while the first refrigerant stream is fed into the first common heat exchanger at a refrigerant feeding temperature. The temperature difference between the hydrocarbon feeding temperature and the refrigerant feeding temperature is lower than 60° C.
US10704826B2
A refrigerator includes a cabinet, a door, an outer plate defining a plate opening, a door liner defining a liner opening, a frame disposed along a circumference of the plate opening, a transparent display assembly seated on the frame and configured to cover at least a portion of the plate opening and the liner opening, a decoration cap defining a top surface of the door, an insulation material filled in at least a portion of the door along a circumference of the transparent display assembly, a PCB configured to control operation of the transparent display assembly, and a barrier that contacts the outer plate and that defines a first space configured to receive the insulation material and a second space configured to accommodate the PCB.
US10704802B2
A water heating apparatus includes a water inlet port and a hot water supply connection water outlet port. A burner assembly includes a burner disposed within a combustion chamber housing. At least two heat exchangers are operated in parallel. At least two of the at least two heat exchangers have at least a first heat exchanger water inlet port on a same side of the water heating apparatus. A water jacket is defined by an area between an outer containment vessel and the combustion chamber housing. The heated water flows out of each of each of the at least two heat exchangers through the portion of each of the at least two heat exchangers into the water jacket. The heated water which flows into the water jacket is further heated by the combustion chamber housing and the further heated water exits the water heating apparatus at the hot water supply connection water outlet port.
US10704801B2
An HVAC component and method of forming the HVAC component, including a duct having a first surface and a second surface movable between an unassembled position and an assembled position is provided, wherein the method includes (a) applying a paint sealant to one of the first and the second surfaces; (b) one of drying or curing the applied paint sealant; and (c) moving the first and second surfaces from the unassembled to the assembled position, the paint sealant forming a sealed interface between the assembled first surface and second surface.
US10704786B2
A fuel injector for injecting alternate fuels having a different energy density in a gas turbine is provided. A first fuel supply channel (18) may be fluidly coupled to a radial passage (22) in a plurality of vanes (20) that branches into passages (24) (e.g., axial passages) to inject a first fuel without jet in cross-flow injection. This may be effective to reduce flashback in fuels having a relatively high flame speed. A mixer (30) with lobes (32) for injection of a second fuel may be arranged at the downstream end of a fuel delivery tube (12). A fuel-routing structure (38) may be configured to route the second fuel within a respective lobe so that fuel injection of the second fuel takes place radially outwardly relative to a central region of the mixer. This may be conducive to an improved (e.g., a relatively more uniform) mixing of air and fuel.
US10704784B2
The invention relates ton attemperator. It has a pipe section (3) and a liner pipe section (4) arranged within the pipe section (3) and being attached thereto. The pipe section (3) has an internal wall surface (33) and the liner pipe section (4) has an external wall surface (43). The internal wall surface (33) and external wall surface (43) form a gap (6) between them. The pipe section (3) and liner pipe section (4) each has an inlet end (31, 41) for connection to a steam supply and an outlet end (32, 42) for steam. The attemperator is provided with water injection means (2) arranged for supplying water into the interior of the liner pipe section (4). The inlet end (31) of the liner pipe section (3) has an outwardly extending wall portion (44) forming an outer circumferential outer zone (45), which zone (45) may contact the internal wall surface (33) of the pipe section (3).According to the invention there is provided a plurality of openings (47) arranged to allow steam to enter the space formed by the gap (6) between the internal wall surface (33) and the external wall surface (43).The invention also relates to a use of the attemperator.
US10704778B2
An LED fixture is provided including a housing having a hollow configuration, a mounting plate secured to an upper end of the housing, a globe ring, separate from the housing, secured to a lower exterior end of the housing, a base on the housing extending within the globe ring, and an LED array positioned on the base of the housing.
US10704773B2
An outdoor light holder structure includes: a holder body, a partitioning plate being disposed in the holder body; an assembling member buckled with the holder body; a first electro-conductive plate received in a first through hole of the holder body, the first electro-conductive plate having a first tip section and a first stop section extending to the assembling member; a second electro-conductive plate received in a second through hole of the holder body, the second electro-conductive plate having a second tip section and a second stop section extending to the assembling member, the first stop section and the second stop section being slightly raised from the partitioning plate; and a conductive wire disposed between the holder body and the assembling member. The first and second stop sections are inlaid and engaged in the conductive wire to secure the conductive wire with holder body.
US10704770B2
A lighting arrangement can include a mounting bracket, a luminaire, at least one first spring arm, and at least one second spring arm. The mounting bracket can be releasably mountable to at least one of a junction box, a wall and a ceiling. The luminaire can extend along a longitudinal axis between a light emanating face and a rear face. The at least one first spring arm can extend between a base end and a distal end wherein the base end can be mounted to a first of the mounting bracket and the luminaire. The at least one second spring arm can extend between a base end and a distal end wherein the base end of the at least one second spring arm can be mounted to a second of the mounting bracket and the luminaire.
US10704767B2
A color mixing illumination device and method of using the same. The color mixing illumination device includes a printed circuit board (PCB) having a PCB surface with a reflective portion; a multi-color light source attached to the PCB, such as a red-green-blue light emitting diode (RGB LED); and a reflector with a reflector surface. The PCB surface and the reflector surface are configured to mix light from the multi-color light source in a mixing region and then direct mixed light out of the device from an exit region. In one embodiment, the color mixing illumination device is a multi-color indicator lamp for a vehicle.
US10704766B2
A driver and a light fixture including an LED array and the driver. The driver including a microprocessor, at least one capacitor, a charging circuit, and discharging circuit. The charging circuit is controlled by the microprocessor and charges the at least one capacitor to a voltage such as at least two times a forward voltage of the LED array. The discharging circuit is controlled by the microprocessor and delivers power from the at least one capacitor to the LED array in discrete pulses.
US10704762B2
A decorative optical element that has an appearance of a glass optical element includes an optically transparent body having a faceted globular portion defined by a solid volume of polymeric material. A luminaire, such as for a street light, employs the decorative optical element and an LED circuit board mounted to the circuit board.
US10704760B2
A vehicle lamp includes a long lamp component, and the lamp component includes a plurality of divided parts arranged in a longitudinal direction thereof and interconnected by a joint structure. The joint structure includes a first claw configured to connect upper surfaces of two adjacent divided parts of the plurality of divided parts and a first claw receiving hole fitted into the first claw, and a second claw configured to connect lower surfaces of the two divided parts and a second claw receiving hole fitted into the second claw.
US10704758B2
A light shield comprising a clamping mechanism, a shield and a motor, wherein a light-outlet groove is formed in the clamping mechanism, the shield is arranged on the clamping mechanism in a reciprocating mode through a limiting mechanism, and the motor is used for driving the shield to move back and forth along the clamping mechanism, thereby enabling the shield to conveniently block or unblock the light-outlet groove; according to the present invention, the variation of the light amount and the light pattern of the automobile headlamp can be achieved through blocking or unblocking the light-outlet groove by the shield, and through changing the reflected light pass region of the reflector.
US10704742B2
A light emitting diode (LED) tube lamp comprises: a lamp tube; a rectifying circuit, configured to rectify an input external driving signal; a filtering circuit, configured to produce a filtered signal; a driving circuit and an LED module, the driving circuit configured to receive the filtered signal in a first driving mode for driving the LED module; a mode switching circuit, configured to receive the filtered signal in a second driving mode for driving the LED module; and an auxiliary power module configured to provide auxiliary power for the LED module to emit light, wherein the mode switching circuit is on a printed circuit board and is electrically connected to the LED module on a bendable circuit sheet in the LED tube lamp, and the bendable circuit sheet is disposed below the printed circuit board to be electrically connected to the printed circuit board by soldering.
US10704741B2
An LED light bulb comprises an LED filament configured for emitting omnidirectional light. The filament comprises a linear array of LED chips operably interconnected to emit light upon energization, a conductive electrode electrically connected with the linear array of LED chips, and a light conversion coating enclosing the linear array of the LED chip and the electrode. The light conversion coating includes a top layer and a base layer conformally interconnected to form a unitary enclosure. The top layer is coated on a first side of the linear array of LED chips and the electrode. The base layer is coated on a second side of the linear array of LED chips and the electrode. A first LED chip in the linear array of LED chips is guided by the unitary enclosure to a different angle in relation to a second LED chip in the linear array of the LED chips.
US10704740B2
Various embodiments provide a method of simulating a leak in a pipeline. The method includes: receiving a fluid stream from a fluid supply; and outputting the received fluid stream through an outlet such that the received fluid stream hits an outer surface of the pipeline at a location opposite the outlet such that a vibration is caused in the pipeline. Some other embodiments provide a corresponding system for simulating a leak in a pipeline, and a corresponding outlet for coupling a conduit to a pipeline.
US10704738B2
A high-pressure vessel includes: a body portion formed in a cylindrical shape, with at least one end portion of the body portion, in an axial direction thereof, being open; a cap, at least part of which is inserted inside at least one open end portion of the body portion to plug the at least one open end portion; a first reinforcement layer provided on an outer peripheral surface of the body portion and made of fiber-reinforced plastic, a fiber direction of which coincides with a circumferential direction of the body portion; and a second reinforcement layer integrated with the first reinforcement layer and made of fiber-reinforced plastic including fibers that bridge one end portion and another end portion, in the axial direction, of the body portion.
US10704731B2
Sixpod stand for camera, speaker and the like is invented to place heavy camera, speaker or photo studio background support etc. Existing Tripod stand for camera, speaker and the like has only one column and three legs so that it cannot support heavy objects on the top of tripod stand. Namely, the current tripod stand is too weak to support such a heavy object. In addition, since the current tripod stand has only one extended rod, it cannot make its height longer than a sixpod stand. Especially the tripod is impossible to be used as a supporter for a photo studio background which need both strength and height.On the other hand, sixpod stand has two columns and six legs. Six legs support two columns and inside of two columns, there are three respective rods in two respective columns inner surface by outer surface so that the height of sixpod stand could be extended as high as the length of three rods inside of two columns. People could not only place a heavy object on the top of sixpod but also place such a heavy object on the position which is as high as the length of three rods inside of two columns.
US10704718B2
A flexible joint assembly for a joint between a first duct and a second duct for providing a flow of fluid, such as bleed air in an aviation implementation. The flexible joint includes a bellows supported by a mounting assembly having a first support and a second support, provided within the interior of the bellows. A rod assembly can operably couple the first support and the second support.
US10704711B2
A hose line and a method for producing the same. The hose line (1) has a hose connection (3) which has a connection piece having a connection nipple. A hose end of a flexible hose (2) is pushed onto the connection nipple. The hose connection (3) also has a crimp sleeve (6) which immovably clamps the hose end between itself and the connection nipple in the longitudinal direction of the nipple. There are at least two tool contact surfaces on the hose connection (3), arranged on opposite sides of the hose connection (3), preferably allocated to each other in pairs and in particular designed as wrench contact surfaces (7). The at least two tool contact surfaces of the hose connection (3), which are allocated to each other in pairs, are on the crimp sleeve (6). A ratio of a length of the crimp sleeve (6) to an outside diameter of the flexible hose is 1.5:1 to 3:1.
US10704710B2
A clamp assembly for securing wire bundles to a structure having a body and a strap hinged to the body having an axis of rotation. The body has a ramp with a surface and has a latch wall portion. The strap has a locking wall portion wherein a radial distance from the surface to the axis of rotation decreases as the surface extends in a direction away from the strap such that with the strap in contact with the surface and slid along in contact with the surface, the strap resiliently bends in a direction toward the a first end of the strap. With the strap moved beyond the surface, the strap resiliently bends in a direction away from the first end of the strap, placing the locking wall portion in abutting relationship with the latch wall portion and positioning the strap and the body in a closed locked position.
US10704708B2
A valve operating device includes a mounting for attachment to a vehicle and an elongate arm, the free end of which is only moveable across the underlying ground. The joints of the arm pivot around vertical axes and the arm is locked into a desired orientation by a brake at each joint. A valve turning machine is at the free end of the arm. The brakes are engaged and released by a control on the valve turning machine.
US10704698B2
A safety head is disclosed. More particularly, a safety head comprising a circular flange portion and at least one protrusion is disclosed, wherein the at least one protrusion has a face exhibiting a blended radius of curvature. The circular flange portion may be thicker than the at least one protrusion. A safety head assembly is also disclosed, wherein the safety head assembly comprises an inlet safety head and an outlet safety head. Additionally, a safety head assembly is disclosed wherein the inlet safety head comprises a peripheral protrusion, the outlet safety head comprises a peripheral protrusion, and a clamp ring is configured to engage with the peripheral protrusions.
US10704691B2
A method and apparatus for providing a mechanical seal between two objects is provided. The mechanical interface including a protrusion located on a first component; and a pair of cantilevered beams located on a second component, wherein the pair of cantilevered beams are forced outwardly on opposite sides of the protrusion when a tab portion of the second component is received in an opening of the first component. The method of including the steps of: forcing a pair of cantilevered beams located on a second component outwardly from opposite sides of the protrusion when as a tab portion of the second component is received in an opening of a first component.
US10704686B2
A control apparatus for a drive-force transmitting apparatus that includes a transmission having primary and secondary pulleys. The control apparatus calculates a target thrust applied to the secondary pulley such that the target thrust is larger during a vehicle driven state than during a vehicle driving state. The control apparatus sets a first determination threshold of a drive-force related value used to determine whether it is the vehicle driving state or vehicle driven state and a second determination threshold of the drive-force related value used to switch from determination of the driven state to determination of the driving state, such that a difference of the first and second determination thresholds is larger and a range of the drive-force related value in which the driven state is determined is wider, when an automatic running-speed control is executed, than when the automatic running-speed control is not executed.
US10704685B2
The present invention relates to a hydraulic-assistance system for motor vehicles, comprising a primary motor (M) and two hydraulic machines (140; 240, 250) connected by a hydraulic circuit such that when a first hydraulic machine (140) operates as a pump, the second hydraulic machine (240, 250) operates as a motor. The invention is characterized in that the hydraulic circuit connecting the two machines (140; 240, 250) is an open circuit passing through a tank (300), the hydraulic machine (240, 250) operating as a motor is a declutchable machine, and the hydraulic machine (140) operating as a pump is a pump in which the variable displacement is controlled by a device comprising a proportional pressure limiter (470) placed between a drain line (143) and the discharge line of the hydraulic machine (140) operating as a pump, and enabling the assistance pressure to be set, and at least one collection nozzle (460) placed between the proportional pressure limiter (470) and the discharge line of the hydraulic machine (140), the setpoint pressure controlling the hydraulic machine (140) operating as a pump being collected between the pressure limiter (470) and the collection nozzle (460).
US10704680B2
In a transmission control device for controlling a transmission, a controller determines failure of a SOL corresponding to a hydraulic secondary-pressure actuator. The controller variably controls line command pressure, and in a case where the failure is determined, fixes the line command pressure to a line pressure set value. The controller variably controls primary command pressure, and in a case where the failure is determined, continuously changes a speed ratio of a variator by variably controlling the primary command pressure. The controller variably controls secondary command pressure, and in a case where the failure is determined, fixes the secondary command pressure to a secondary pressure set value.
US10704662B2
A variator unit of a power-split continuously variable transmission device is fixed to a rotationally fixed component and has a primary side rotationally fixed to an input shaft and a secondary side rotationally fixed to each respective first element of the first and a second planetary gear sets via a third shaft. A third element of the first planetary gear set is rotationally fixed to a third element of the second planetary gear set via a fourth shaft and is fixable to the rotationally fixed component via a first shift element. A fifth shaft is rotationally fixed to a second element of the second planetary gear set, which is fixable to the rotationally fixed component via the third shift element, and is connectable to the input shaft via the second shift element. A second element of the first planetary gear set is rotationally fixed to the output shaft.
US10704652B2
A power transmission apparatus configured for a vehicle may include a first input shaft fixedly connected to a motor/generator, a second input shaft selectively connectable to the first input shaft, a third input shaft selectively connectable to the first input shaft, a torque mediating shaft externally disposed with the first input shaft, an intermediate shaft, an idle shaft, an output shaft, a first shifting section selectively receiving a torque from the third input shaft, shifting the received torque and outputting the shifted torque, a second shifting section shifting a torque from the first input shaft to the torque mediating shaft, or stopping a rotation of the torque mediating shaft, and a third shifting section selectively receiving a torques from the first and second shifting sections and a torque from the second input and outputting shifted torque to the output shaft.
US10704645B2
A cover fabric for a power transmission belt, the fabric woven from warp yarns and weft yarns; the warp yarns and weft yarns each plied from a first filament yarn and a second filament yarn; the first filament yarn comprising higher tensile strength fibers than the second filament yarn; and the fabric woven in a modified twill pattern. A toothed belt with the cover fabric on the teeth, oriented on a bias, with the fabric having a bias angle less than 90°.
US10704636B2
An elastomer spring (10) for a vehicle (12) includes a cylindrical body (28) adapted to be disposed within a coil spring (20) of the vehicle (12) and extend axially between a first component (16) and a second component (18) of the vehicle (12), the second component (18) being spaced from and moveable toward the first component (16) along an axis of the coil spring (20). The body (28) has a height greater than a width thereof and a plurality of apertures (38) spaced about the body (28), wherein the apertures (38) are configured to allow the coil spring (20) to compress axially for absorbing energy as one of the first component (16) and the second component (18) move along the axis.
US10704635B2
A spring assembly is provided which decreases the fatigue and wear on the springs of the assembly. The spring assembly includes upper and lower pistons separated by a substantially incompressible fluid. The lower piston is attached to one or more springs. The surface area of the upper surface of the lower piston is greater than the surface area of the lower surface of the upper piston. As such, the springs are deflected by a distance less than the distance traveled by the upper piston. By decreasing the length the springs are compressed, the springs are subject to less fatigue and wear. As a result, the life span of the springs is increased and the maintenance required of the spring assembly is minimized relative to that of typical spring assemblies.
US10704632B2
The present disclosure provides a transmission clutch assembly having a drum, a brake band, a smart material band and an electrical circuit. The brake band substantially encircles the drum and includes first and second ends, a high friction inner surface, and a low friction outer surface. The smart material band includes a beginning end and a terminating end wherein the beginning end of the smart material band is coupled to the second end of the brake band while the terminating end of the smart material band is coupled to the first end of the brake band. The electrical circuit transfers an electrical current to the smart material band. The smart material band contracts when the electrical current is applied to the smart material band thereby drawing the first and second ends of the brake band closer and contracting the brake hand against the drum to restrict drum movement.
US10704631B2
There is provided a configuration in which an association between a location of each brake shoe of a railway vehicle and each abrasion detection tag is easily learned, and system implementation and management are simplified. A brake shoe abrasion detection system of a railway vehicle includes a computer that receives data of a signal read by a reader from at least one abrasion detection RF tag attached to each of a plurality of brake shoes of the railway vehicle passing the reader. The computer determines an association between a plurality of the signals and the plurality of brake shoes based on an order that the reader reads the plurality of signals from a plurality of the abrasion detection RF tags attached to the plurality of brake shoes, respectively.
US10704616B2
A one-way inertial rotational device includes: a rotary seat; an inertial member pivotally rotatably disposed on the circumference of the rotary seat via a pivot hole, a circumference of the rotary seat and a hole wall of the pivot hole of the inertial member being defined as a first circumferential face and a second circumferential face; and a one-way transmission mechanism having at least one one-way transmission tooth, at least one elastic member and multiple engagement teeth. The engagement teeth are annularly disposed on the second circumferential face. The transmission tooth is displaceably disposed on the first circumferential face. The elastic member keeps the transmission tooth engaged with the engagement teeth. Each engagement tooth has a tooth crest and a tooth height. The width of the tooth crest is larger than the tooth height so that the loss of the rotational energy is reduced to achieve greater rotational torque.
US10704613B2
An actuator assembly for being operated in the driveline of a motor vehicle comprises a drive unit for generating an operating force and a ramp unit drivable by the drive unit. The ramp unit comprises an abutment element, a first ring and a second ring. The first ring is drivable by the drive unit so as to rotate around a rotational axis (A) and a plurality of circumferentially distributed axial through-openings. In each of the axial through-openings two rollers are arranged of which respectively a first roller is axially supported against the abutment element and a second roller is axially supported against the second ring The second ring is configured to be held in a stationary component in a rotationally fixed and axially movable way and comprises a plurality of circumferentially distributed ramps which each cooperate with an associated roller. The ramps are configured such that rotatingly driving the rotatingly drivable first ring by the drive unit generates an axial movement of the second ring relative to the first ring. A clutch assembly can have such an actuator assembly.
US10704592B2
A foil hinge system for a hydrofoil or airfoil includes a main foil body 1, substantially extending in a longitudinal direction L and a transverse direction T, a flap 2 hinged to the main foil body 1 arranged on a longitudinal end side of the main foil body 1, and a flexible element 3 connecting the main foil body 1 and the flap 2. Several rigid structures 4, 5 are arranged in such a manner on the flexible element 3, that they provide a dead stop when the flap 2 is in a maximum deflection with respect to the main foil body 1.
US10704589B2
A wire thread insert comprises besides a cylindrical helix consisting of a plurality of coils a moving tang projecting into the interior of the helix for installing the wire thread insert into a receiving thread. The wire thread insert is connected to the cylindrical helix via a bending portion such that the moving tang can be redressed into the receiving thread after installation of the wire thread insert. The wire thread insert is installed by means of an installation tool with a mounting spindle, which installs the wire thread insert in the receiving thread via a moving shoulder and the moving tang. A compression blade provided at the mounting spindle bends the moving tang back into the receiving thread while the mounting spindle is removed from the installed wire thread insert.
US10704577B2
A resilient U-base fastener includes a U-shaped body defining a central cavity between first and second sides. The fastener has an insertion end with the first and second sides extending therefrom to a trailing end. The fastener includes a first barb extension extending outwardly from one of the lateral side edges of the first side. The first barb extension is bent to support a first barb in the central cavity. The fastener also includes a second barb extension extending outwardly from a lateral side edge of the first side opposite the first barb extension. The second barb extension is bent to support a second barb in the central cavity.
US10704573B2
In one aspect, a system for rephasing fluid-driven actuators includes a plurality of fluid-driven actuators fluidly coupled together in series. A controller is configured to monitor a position differential existing between current positions of rods of the actuators relative to a differential threshold based on sensor measurements. The actuators are out-of-phase when the monitored differential exceeds the threshold. The controller is also configured to initiate a flow of fluid to the actuators to rephase the actuators when the monitored differential exceeds the threshold. The controller is further be configured to continue to monitor the differential following initiation of the flow of fluid to the actuators. Additionally, the controller is configured to implement a control action associated with terminating the rephasing of the actuators when the monitored differential remains constant after a first time period has elapsed following initiation of the flow of fluid.
US10704571B2
A poppet valve system that includes a valve body having a first and second end and defining a valve cavity and a poppet assembly extending from the first end to the second end and through the valve cavity. The poppet assembly can include a movable poppet head disposed at the first end of the poppet assembly and configured generate a seal by contacting a portion of the valve body and configured to define an opening between the valve cavity and a pressure cavity. The poppet assembly can also include a movable guiding element disposed at the second end of the valve body and a shaft extending from the first end to the second end and coupled to the poppet head and guiding element.
US10704567B2
A compressor module for compressing gas composed of a compressor element with a housing with integrated compressor element cooler; a motor and a gas cooler for cooling the compressed gas originating from the compressor element. The gas cooler includes a primary section through which the gas to be cooled can be guided and a secondary section that is in heat-exchanging contact with the primary section. A first cooling circuit can guide a coolant through the secondary section of the gas cooler or through a section thereof and a second cooling circuit can guide a coolant through the compressor element cooler. The first cooling circuit and the second cooling circuit are joined together in series or in parallel and are guided to a common output.
US10704559B2
A vertical pump includes: a rotary shaft; multi-stage impellers; a casing accommodating the multi-stage impellers; a mechanical seal provided in a penetration part of the casing for the rotary shaft; a balance sleeve, the balance sleeve being positioned between a final stage impeller of the multi-stage impellers and the mechanical seal in the penetration part for the rotary shaft; an intermediate chamber provided between the rotary shaft and the casing and provided on an opposite side of the multi-stage impellers across the balance sleeve in an axial direction of the rotary shaft, the intermediate chamber communicating with an intermediate stage impeller among the multi-stage impellers; a low pressure chamber provided between the rotary shaft and the casing, the low pressure chamber communicating with a low pressure side compared to the intermediate chamber; and a partition wall part dividing the intermediate chamber and the low pressure chamber.
US10704554B2
A cross-flow fan made of resin includes first and second fan blocks joined together. The first fan block includes a first support plate, plural first blades connected to the first support plate, and a first outer peripheral ring having a first ring portion that interconnects outer ends of the plural first blades. The second fan block includes a second support plate, plural second blades having second one-side distal ends connected to the second support plate, and a second outer peripheral ring having a second ring portion that interconnects outer ends of the plural second blades adjacent second other-side distal ends of the plural second blades. The second other-side distal ends of the plural second blades are joined to the first support plate, and the first support plate and the second outer peripheral ring are disposed adjacent to each other.
US10704551B2
A rotation device according to an embodiment includes a first gear, a second gear, and an energizing part. The first gear includes a toothless part and is connected with a rotation driving source. The toothless part is obtained by cutting a part of continuous teeth of the first gear. The second gear is arranged to be able to be engaged with the first gear and is rotated, when engaged with the first gear, in a predetermined direction by a rotation of the rotation driving source in one direction. The energizing part energizes the second gear in a direction reverse to the predetermined direction when the second gear is in a free state in which an engagement of the second gear with the first gear is released by the toothless part.
US10704547B2
A volume pump transfers a transfer fluid by expanding and contracting a bellows, and includes: the bellows that is capable of expanding and contracting, and has a bottomed cylindrical shape forming a pump chamber on its inside; a suction valve provided on a suction side of the pump chamber to guide the transfer fluid into the pump chamber; and a discharge valve provided on a discharge side of the pump chamber to discharge the transfer fluid from the pump chamber. The suction valve and the discharge valve each include a valve seat and a valve body. The valve body is configured from a flexible material and has: a fixed section whose positional relationship with the valve seat is fixed; and a valve section that extends in a certain direction between a direction directed from the fixed section to the valve seat and a direction that the transfer fluid moves.
US10704543B2
A distributor head for a suction pump which includes a housing (12), a pump port (16) configured to apply a negative pressure, and a plurality of hollow needles (18). The hollow needles are fixed to the housing (12), are connected in a liquid-tight manner to the pump port (16), and are arranged parallel to and at a distance from one another. Individual connecting paths (34) of the hollow needles (18) to the pump port (16) include respective, independently operable control valves (36).
US10704535B2
The present invention relates to an assembly of two structural parts of a wind turbine wherein the structural parts are to be connected in a flange-to-flange connection by a number of bolts and such that a flange of the first structural part and a flange of the second are centrally and rotationally aligned whereby a first borehole in the flange of the first structural part is matched and aligned with a corresponding first borehole in the flange of the second structural part. The structural parts may for example be a tower section or a foundation section. The assembly further comprises a first and a second rotational guide member releasably attached to each of the flanges of the structural parts. Each of the rotational guide members comprises a U-shaped or L-shaped structure of a first leg portion and a second leg portion connected by a central portion, the first leg portion ending in a positioning portion shaped to be inserted into a borehole of the flange, and the second leg portion comprising a stop member, and for at least one of the rotational guide members the structure comprised in the rotational guide member is U-shaped. The stop member of the first rotational guide member is configured for abutment to the second leg portion of the second rotational guide member when the flanges of the first and second structural parts are centrally and rotationally aligned. The invention further relates to a method of positioning and connecting two structural parts of a wind turbine as described above. The method includes first centrally aligning the structural parts with the flanges face-to-face and then rotating the structural part relative to each other until the rotational guide members come into contact with each other.
US10704532B2
A Savonius wind turbine includes a rotor assembly that rotates about a longitudinal axis. The rotor assembly includes at least two curved turbine blades extending parallel to the longitudinal axis and at least two support discs connected to the at least two curved turbine blades. At least one of the at least two support discs has at least one relief vent defined therein for allowing air to pass through the at least one support disc. The wind turbine may be provided with two rotor assemblies having their curved turbine blades arranged so that the rotor assemblies are driven to rotate in opposing rotational directions.
US10704527B2
An apparatus is provided for modifying the geometry of at least one part of a turbine, which can include a shell assembly that includes an outer shell that is shaped to modify the shape of a pre-existing element of a turbine. The outer shell of the shell assembly can be composed of a fiber-reinforced polymeric material and can at least partially define an inner cavity. The outer shell can be bonded to a structure to modify the geometrical shape of that structure. Thereafter, a polymer casting can be injected into the inner cavity via at least one injection port attached to the shell assembly. In some embodiments, one or more stiffeners and/or a core can be positioned within the inner cavity to help improve the bonding of the polymer casting to the shell and/or improve a structural property of the apparatus.
US10704517B2
A combustion chamber comprising an upstream end wall, at least one annular wall, at least one fuel injector and at least one seal. The at least one annular wall being secured to the upstream end wall. The upstream end wall having at least one aperture. Each fuel injector being arranged in a corresponding one of the apertures in the upstream end wall and each seal being arranged in a corresponding one of the apertures in the upstream end wall and around the corresponding one of the fuel injectors. Each seal having an inner surface facing the corresponding one of the fuel injectors and an outer surface facing away from the corresponding one of the fuel injectors. Each seal abutting the corresponding one of the fuel injectors. The downstream end of each seal increasing in diameter in a downstream direction and the upstream end of each seal having a radially extending flange. Each seal having a plurality of coolant apertures extending axially through the radially extending flange and/or each seal having a plurality of thermal conductors extending axially from the radially extending flange to the downstream end of the seal.
US10704511B2
A tubular seal is formed of an elastic material and equipped on the outer periphery of a first tube. A second tube is inserted in the tubular seal and connected with the first tube via the tubular seal. A clamp is in a strap shape formed of a metallic material and is attached on an outer periphery of the tubular seal. The second tube or the clamp has a tab, which is protruded in a radial direction. The tubular seal has a slit extending in the radial direction. The tab is engaged with and latched on the slit.
US10704508B2
Engines, systems, devices, software, and methods of the present invention provide increased fuel efficiency and emission performance. The engine may include a magnesium alloy cast engine block cast as a mono-block with or without a ceramic inner core and including one or more cylinders designed to provide compression ratio of 10:1 to 14:1. Each cylinder may include one or more laser igniters, one or more supercritical fuel injectors configured to inject the fuel near or in a supercritical state, and carbon dioxide, which may be in the form of engine exhaust gas. The fuel may be diesel, gasoline, or other suitable hydrocarbons that may be cracked into smaller molecules prior to be injected into the cylinder.
US10704501B2
The present disclosure describes an evaporative emission control canister system that includes: one or more canisters comprising at least one vent-side particulate adsorbent volume comprising a particulate adsorbent having microscopic pores with a diameter of less than about 100 nm; macroscopic pores having a diameter of about 100-100,000 nm; and a ratio of a volume of the macroscopic pores to a volume of the microscopic pores that is greater than about 150%, and having a retentivity of about 1.0 g/dL or less. The system may further include a high butane working capacity adsorbent. The disclosure also describes a method for reducing emissions in an evaporative emission control system.
US10704492B1
A piston for an internal combustion engine includes a piston head having a central axis and a top surface. The top surface of the piston includes a piston bowl, a circumferentially extending recess located radially outside the piston bowl, a plurality of diverters located within the recess, and a crown portion located radially outside the recess and extending to an outer surface of the piston.
US10704489B2
A controller executes an advancement process for advancing an injection start timing by a direct injection valve to a larger extent when a coolant temperature that is a temperature of coolant in an internal combustion engine is greater than or equal to a preset temperature than when the coolant temperature is lower than the preset temperature. The advancement process includes a retardation process for setting a smaller advancement amount at the injection start timing when a lubricant temperature that is a temperature of lubricant is lower than a predetermined temperature than when the lubricant temperature is greater than or equal to the predetermined temperature.
US10704486B2
The purpose of the present invention is to provide a drive device that improves the precision of injection quantities by stabilizing the behavior of a valve body 214 under the condition that a valve body reaches a height position lower than a maximum height position and making the injection pulse width and the injection quantity gradient small. The present invention is a drive device for a fuel injection device for use in an internal combustion engine, wherein: the fuel injection device is provided with a valve body 214 that can open and close a fuel passage, a needle 202 that activates an opening and closing valve by transmitting power between itself and the valve body 214, and an electromagnet that comprises a solenoid 205 and a fixed core 207 provided as drive means for the needle 202, and a cylindrical nozzle holder 201 disposed on the outer peripheral side of the needle 202; and the drive device 150 controls a drive current flowing to the coil so as to decrease from the maximum drive current to a first drive current 610 that is lower than the maximum drive current before the valve body 214 reaches the maximum height position so that the valve body 214 reaches a height position lower than the maximum height position.
US10704483B2
A blended fuel injection control method may include a cold-starting determination step in which a controller determines whether a cold-starting condition is satisfied on the basis of output values that can be obtained by a vehicle; a detection step in which the controller detects the content of ethanol in blended fuel of gasoline and ethanol when determining the cold-starting condition is satisfied; and a first injection control step in which the controller controls the blended fuel to be injected selectively in one of a Multi-Point Injection (MPI) mode, an MPI & GDI mode combining MPI and Gasoline Direct Injection (GDI) modes, and a GDI mode in accordance with the content of ethanol in the blended fuel until an engine RPM reaches an early peak RPM in engine-cranking.
US10704481B2
An internal combustion engine includes a filter, which is configured to trap particulate matter in exhaust gas, an EGR passage, which connects a section of an exhaust passage that is upstream of the filter to an intake passage, and an EGR valve, which is configured to adjust a cross-sectional flow area of the EGR passage. A controller for the internal combustion engine includes processing circuitry, which is configured to execute a limiting process of limiting an opening degree of the EGR valve such that the opening degree is likely to decrease when an amount of the particulate matter trapped by the filter is great as compared to when the amount is small.
US10704471B2
Provided is a dump truck that includes an engine (1) and an ECU (7) controlling the engine (1) and that performs a predetermined operation after arriving at a destination. The ECU (7) is configured to makes larger an engine power suppression amount on a route leading the dump truck to the destination as a work waiting time that is a prediction time elapsing from an arrival of the dump truck at the destination to a start of the operation by the dump truck is longer and as an engine load of the dump truck is lower.
US10704468B2
A gas turbine engine is provided comprising a compressor section, a combustor section, a diffuser case module, and a manifold. The diffuser case module includes a multiple of struts within an annular flow path from said compressor section to said combustor section, wherein at least one of said multiple of struts defines a mid-span pre-diffuser inlet in communication with said annular flow path. The manifold is in communication with said mid-span pre-diffuser inlet and said compressor section.
US10704462B2
While an actuator is driven by an actuator driving unit with an operation amount for which the maximum value is limited by an operation amount limitation unit, if a state in which the actual opening degree of a wastegate valve does not coincide with a target opening degree has continued for a predetermined time period, driving by the actuator driving unit is attempted with an operation amount for which the maximum value limitation is relaxed by an operation amount limitation relaxing unit. Even after this, if the state in which the actual opening degree of the wastegate valve does not coincide with the target opening degree still has not been eliminated, an abnormality determination unit determines that abnormality has occurred in an opening degree control system for the wastegate valve.
US10704450B2
A piston cooling jet includes a first body and a second body. The first body includes a housing having an inlet fluidly coupled with nozzle outlets. The second body is coupled to the first body to form an interior chamber disposed inside the first body and the second body. The interior chamber is fluidly coupled with the inlet and the nozzle outlets. The interior chamber directs fluid received via the inlet through the nozzle outlets and out of the piston cooling jet assembly in a direction towards a spray target.
US10704449B2
An exhaust manifold comprises a plurality of exhaust intake conduits structured to be fluidly coupled to an engine and receive exhaust gas from a corresponding cylinder of the engine. At least one exhaust intake conduit provides a reduction in an exhaust intake conduit cross-sectional area from an inlet to an outlet. A plurality of bends are each defined by a respective one of the exhaust intake conduit outlets. An exhaust intake manifold is fluidly coupled to the exhaust intake manifold and defines an exhaust intake manifold flow axis. Each of the plurality of bends is shaped so as to define an angle of approach of exhaust gas flowing therethrough. A first angle of approach of the first bend relative to the exhaust intake manifold flow axis is smaller than a second angle of approach of an inner second bend.
US10704444B2
An injector for injecting a reagent includes an axially translatable valve member positioned within a housing. A flux sleeve is surrounded by a coil of an electromagnet. A pole piece defines a return passageway for reagent to flow. A filter surrounds the pole piece and includes a cage and a mesh fixed to the cage. The cage includes a deformable first seal biasedly engaging an outer surface of the pole piece. The cage includes a second seal biasedly engaging the housing. The first and second seals define a closed volume such that all of the reagent flowing through the injector passes through the mesh.
US10704424B2
A component for a gas turbine engine includes a substrate with a substrate aperture and a coating on the substrate that extends a length of the substrate aperture. A liner assembly for a gas turbine engine includes a hot sheet with a multiple of apertures and a coating on the hot sheet that extends a length of each of the multiple of apertures. A method of forming an aperture to provide film cooling in a component of a gas turbine engine, includes forming a multiple of substrate apertures in a substrate. Each of the multiple of substrate apertures defines a substrate inner periphery. A coating is applied on the substrate after forming the multiple of substrate apertures to define a coating inner periphery at least partially within each of the multiple of substrate apertures. The coating inner periphery is smaller than the substrate inner periphery.
US10704423B2
A diffuser for a turbine engine includes a first wall that extends circumferentially about a centerline axis of the turbine engine. The diffuser also includes a second wall that extends circumferentially about the centerline axis. At least a portion of the second wall is positioned radially outwardly from at least a portion of the first wall. A flow path is defined by the first wall and the second wall. The flow path extends from an inlet configured to receive an axial flow of a fluid, to a circumferentially extending outlet configured to emit the fluid in a substantially radial direction. The outlet extends asymmetrically about the centerline axis.
US10704415B2
In accordance with one aspect of the disclosure, a gas turbine engine, method of using and designing such is disclosed. The gas turbine engine may comprise a fan including a plurality of blades, and a variable area fan nozzle. The fan may be configured to have a design point fan tip leading edge relative flow angle βADP, and may be further configured to have an off-design point fan tip leading edge relative flow angle β at an off-design fan operating point. The variable area fan nozzle may be configured to manipulate the amount of air flowing through the fan so that the absolute value of a difference between the design point fan tip leading edge relative flow angle βADP and the off-design point fan tip leading edge relative flow angle β is in a specified range.
US10704410B2
An unducted thrust producing system has a rotating element with an axis of rotation and a stationary element. The rotating element includes a plurality of blades, and the stationary element has a plurality of vanes configured to impart a change in tangential velocity of the working fluid opposite to that imparted by the rotating element acted upon by the rotating element. The system includes an inlet forward of the rotating element and the stationary element.
US10704408B2
A blade track system includes an outer ring coupled with a blade track, and an inner ring positioned concentrically between the outer ring and the blade track. The outer ring designed to radially expand, at a first predetermined rate, in response to acceleration of a gas turbine engine. The segments of the blade track radially outwardly expanded away from a hub of the gas turbine engine by the radial expansion of the outer ring. The inner ring designed to radially contract inwardly toward the hub of the gas turbine engine at a second predetermined rate in response to deceleration of the gas turbine. The first predetermined rate being greater than the second predetermined rate, and radial contraction of the outer ring and the segments of the blade track constrained to the predetermined rate of contraction of the inner ring.
US10704407B2
A turbine shroud adapted for use in a gas turbine engine includes an attachment feature and a body. The attachment feature and the body are constructed of ceramic matrix composite materials. In an illustrative embodiment, the ceramic matrix composite materials form a blade track segment.
US10704402B2
A gas turbine engine having a combustor, turbine and transition duct to channel hot gas from combustor to turbine. The transition duct has an internal surface on which the hot gas impinges causing a varying temperature profile. A thermal barrier coating is located on the internal surface having a first and second thermal barrier coating patch. The first patch having a first thickness located on the internal surface and within a first area subject to a higher temperature than an uncoated part and bounded by a first isotherm of a first temperature. The second patch having a second thickness located on the internal surface and within a second area subject to a higher temperature than the uncoated part and bounded by a second isotherm of a second temperature. The second temperature is higher than the first temperature and the second thickness is thicker than the first thickness.
US10704400B2
A rotor disc of a gas turbine rotor assembly is provided. The rotor disc may support a plurality of blades attached thereto. The rotor disc may have a plurality of fixing members defined therein through its peripheral surface and circumferentially spaced apart from one another. The fixing members may extend axially from a front end portion to a rear end portion of the disc. Profiled slots may be defined between pairs of adjacent ones of the fixing members and may be configured to receive complementary profiled blade root portions. A plurality of disc lips may project axially forward from a surrounding surface of the disc in the front end portion. A disc lip may be disposed at a tip portion of a fixing member, adjacent a leading edge of the disc to minimize air leakage at a disc/blade interface. A rotor assembly with such rotor disc and a plurality of blades attached thereto is also provided.
US10704391B1
A small aero gas turbine engine with an axial thrust limiter device that uses compressed air acting on a rotating disk extending from a rotor of the engine in which a forward pressure chamber and an aft pressure chamber applies a pressure to both sides of the rotating disk. When rotor is shifted, one side of the rotating disk has an increase in pressure acting on it to shift the rotor in an axial direction. Each pressure chamber includes an upper variable restriction and a lower variable restriction in which the restriction varies due to axial movement of the rotor. A forward and an aft foil bearing can also be used in addition to axial balance the rotor when not enough pressure is available such as at engine startup.
US10704389B2
A system for re-tensioning mine roof channels includes a roof plate having a first side, a second side positioned opposite the first side, and a sidewall extending therebetween, where the first side is configured to engage a surface of a mine roof, and where the sidewall defines a radially extending slot configured to receive a mine roof bolt. The system also includes a spacer having a first side, a second side positioned opposite the first side, and a sidewall extending therebetween, with the first side of the spacer configured to engage with the second side of the roof plate, and the sidewall defining a slot configured to receive a mine roof bolt, and a nut having a first side, a second side positioned opposite the first side, a sidewall therebetween, and a threaded opening, with the sidewall defining a radially extending slot configured to receive a mine roof bolt.
US10704386B2
A method including receiving a waveform, identifying the presence of a pulse in the waveform, and subtracting a reflection template from the received waveform when a pulse is present in the waveform to obtain a corrected waveform, is presented. The method may further include reading the corrected waveform using a digital processing protocol and adjusting a drilling parameter according to the reading. A device configured to perform a method as above is also provided. A method as above, further including modifying a drilling parameter in a wellbore based on the reading of a pulse sequence including the waveform is also provided.
US10704380B2
An apparatus for detecting a cross-bore between a first pipe and a second pipe that are installed underground includes a support and an electronic circuit assembly. The support is movable through the first pipe. The electronic circuit assembly is mounted to the support to move through the first pipe with the support. The electronic circuit assembly includes a controller and a capacitance sensor. The capacitance sensor outputs a capacitance value based on an interaction of an electric field generated by the capacitance sensor with an environment of the first pipe. The capacitance sensor outputs to the controller a given capacitance value when the capacitance sensor is at a location where the environment of the first pipe is a cross-bore intersection with the second pipe. The controller generates an indicator indicative of a presence of a cross-bore upon the capacitance sensor outputting the given capacitance value.
US10704378B2
Downhole water level detecting apparatus for detecting the level of water in a formation in the region of a well installation. The detecting apparatus includes a transmitter for applying electrical signals to a signaling loop at a first location. The signaling loop includes a downhole metallic structure of the well installation and an earth return. The detecting apparatus also includes a detector for monitoring electrical signals in the signaling loop, and an evaluation unit arranged for determining a level of water in the formation relative to the downhole metallic structure in dependence on the monitored signals.
US10704373B2
A method and a system for pressurizing a reservoir volume including fluid in a formation with a parent well extending through the formation includes storing liquefied natural gas (LNG) at an on-site location of the parent well, de-liquefying the LNG to form natural gas at the on-site location, and injecting the natural gas into the parent well to pressurize the reservoir volume through the parent well.
US10704364B2
A coupler includes a housing having a bore therethrough, a lock member at least partially disposed within the bore of the housing and longitudinally movable relative to the housing between a locked position and an unlocked position, and an actuator at least partially disposed within the housing and configured to move the lock member. In another embodiment, a combined multi-coupler system includes a housing having a bore therethrough, an adapter of a tool dock, and a locking assembly including a lock member at least partially disposed within the bore of the housing and longitudinally movable relative to the housing between a locked position and an unlocked position.
US10704363B2
An operating system for a barrier valve or safety valve is responsive to increments in annulus or tubing pressure. An indexing device controls valves that selectively direct pressure applied to one side of an operating piston or the other for attaining the open and closed positions of the barrier valve. One such indexing device can be a j-slot. Other devices that operate a pair of hydraulic valves in tandem for pressure direction to one side of an actuation piston or another are contemplated. The system needs no electric power and there are no control lines needed to run below the production packer in the case of using annulus pressure to actuate the piston or at all if access to tubing pressure is provided from the vicinity of the barrier valve components.
US10704361B2
An injection sleeve and apparatus for injecting fluid into a well includes a flow tube having a piston which upon fluid flow opens one or more outlet ports. The injection sleeve is adapted to include a variable orifice insert which prevents flow through the tool at a first selected pressure level until the outlet ports are in an open position, thereby protecting packing seals on either side of the outlet ports from undue wear and tear, and prolonging the life of the tool. At a second pressure level, the variable orifice insert permits flow through injection sleeve to the formation injection zones. A plurality of the sleeves may be used for sequentially injecting fluid into a plurality of injection formation zones surrounding a well. When injection fluid flow is terminated, the injection sleeves act as a dual barrier valve for preventing flow from the injection formation zones back to the well head.
US10704355B2
A sealing element is flanked by wedge-shaped extrusion ring assemblies. The extrusion rings are continuous for 360 degrees and are slotted from the outside dimension and alternatively from the inside dimension to allow the diameter to increase to the surround tubular or open hole. The extrusion rings climb a ramp on an adjacent pedestal ring on the way out to the borehole wall. Depending on the dimension of the gap to be spanned the extrusion ring slides a variable distance up the pedestal ring ramp. An optional anchor ring is initially forced up an opposite ramp of the pedestal ring. If the sealing gap is short the anchor ring can be eliminated. For larger gaps the anchor ring moves out far enough toward the borehole wall to contact the extrusion ring located on an opposing ramp of the pedestal ring so that reaction forces are directed to keep the anchor ring wedged in position for support of the extrusion ring assembly.
US10704354B2
A plug assembly used in a wellbore fracturing process includes an annular housing that is set in the wellbore, and a ball that lands and seats in the housing. The housing and ball form a pressure barrier in the wellbore that isolates one portion of the wellbore from an adjacent portion. Pressurizing the portion of the wellbore isolated by the plug assembly generates fractures in a formation around that portion of the wellbore. The ball is not reactive with wellbore fluid or affected by wellbore conditions. Fluid communication across the plug assembly is reestablished by fracturing or milling the ball within the housing. Wellbore operations are conducted by inserting downhole tools through a bore axially formed in the housing.
US10704353B2
The present invention provides a modular electrical feedthrough system for use in offshore and top-side electrical submersible pump (“ESP”) installations. A modular electrical connection system includes a stab receptacle assembly for mating with a stab plug assembly and a compliance mount. The stab plug assembly includes stab plugs and guide funnels adapted to guide the stab receptacles into a mating position with the stab plugs. The compliance mount compensates for physical misalignment between stab receptacles and stab plugs. A tubing hanger assembly forms a pressure barrier at a production bore by use of a tubing hanger penetrator assembly including a set of seals to isolate the electrical penetrator from the production bore. A secondary penetrator assembly provides a redundant pressure barrier for increased safety and system reliability.
US10704351B2
This invention relates to a collecting device (1) for loosening and collecting particulate material from a well. The device includes a first end portion and a second end portion; a feed pipe (6) in the first end portion; a collecting container (8) including at least one container section (10), between the feed pipe (6) and the second end portion. A conveyor (18), in the feed pipe (6), moves the particulate material in toward the collecting device (1). The device further includes a tool (20) at the leading end portion of the conveyor (18) and a fluid outlet (38) at the second end portion; a mono pump (12) driven by a motor (22); and at least one container section (10) in a flow path (40) on the pressure side of the mono pump (12). A method for loosening and collecting particulate materials from a well by means of the collecting device (1) is described as well.
US10704350B2
Process for drilling natural gas hydrates with submersible core drilling rig using pressure wireline
A process for drilling natural gas hydrates. A drilling rig is placed in seawater. A suction-press core drilling mode is adopted in a soft sediment formation, a suction-rotary core drilling mode is adopted in a medium-hard sediment formation, or a pumping direction circle-rotary core drilling mode is adopted in a hard sediment formation. A core is extracted. An inner tube for wireline pressure coring is recovered. A holding seal cap is tightened, and the inner tube is stored in a pipe storage rack. Punching is carried out. An inner tube for wireline pressure coring which is hollow is captured to disengage the holding seal cap. The inner tube is lowered. A drill rod is added. The punching is carried out again. The above steps are repeated until the core drilling reaches a given drilling depth. The drill rod, the drill and the corer are recovered.
US10704349B2
A core barrel head assembly including an upper body comprising a central passage. A pair of latches is arranged in the central passage. Each latch pivots about a pivot point at a first end. Each latch includes a latch release at a second end and an outer tube surface engaging surface between the first end and the second end. A retracting case includes a first end configured to engage at least the latch release of the latches. The outer tube surface engaging surface of each latch extends through a latch slot in an outer wall of the upper body and such that the latches rotate about the pivot point. The latches are movable between an extended position and retracted position by the retracting case with a mechanical advantage.
US10704348B2
A crossover sub includes a tubular housing connected to a drill string in a wellbore, a sealing structure to seal against a wellbore wall, and a sleeve valve disposed within the housing and movable between a closed position and an open position in response to a fluid pressure in a first flow chamber or second, separate flow chamber of the housing. The first flow chamber fluidly connects an upper annulus of the wellbore to a central bore of the drill string downhole of the crossover sub. The second flow chamber fluidly connects a central bore of the drill string uphole of the sealing structure to a lower annulus of the wellbore. The sleeve valve closes the second flow chamber in response to the sleeve valve being in the closed position, and opens the second flow chamber in response to the sleeve valve being in the open position.
US10704330B2
Drill bits and methods relating thereto are disclosed. In an embodiment, the drill bit includes a body having a plurality of legs each having a lower section that has a leading surface and a trailing surface. A plurality of cone cutters are each rotatably mounted to the lower section of one of the legs, each having a cone axis, and including a first plurality of cutter elements arranged about the cone axis such that each is shear the formation when the body is rotated about the bit axis.
US10704327B2
A drilling assembly includes a straight housing in which a mud motor assembly is mounted. The mud motor includes a rotor that rotates within a stator. The rotor has an axial centerline substantially parallel with the housing. A drivetrain is coupled between the rotor and a driveshaft. The driveshaft is coupled to a drill head. The driveshaft has a centerline that is non-coincident with (i.e., offset or angled) the axial centerline. The angle between the driveshaft centerline and the axial centerline may be fixed or variable. The angle may be variable in response to an axial force, imparted to the rotor, that is transferred to the driveshaft through the drivetrain. Additional apparatus, systems, and methods are disclosed.
US10704324B2
In one aspect, a mounting assembly for mounting an architectural covering to a support structure may include a bracket configured to be coupled to the support structure and a bracket adapter configured to be coupled to the bracket. In addition, the mounting assembly may include an end mount configured to be coupled to both an adjacent end of the covering and the bracket adapter. In accordance with aspects of the present subject matter, the various components of the mounting assembly may be configured or adapted to provide one or more advantages over known mounting assemblies.
US10704320B2
A method of producing a vacuum insulated glazing (VIG) unit comprising providing substantially parallel glass panes, a plurality of pillars, and a peripheral seal between the glass panes; providing an evacuation hole in a first glass pane for evacuating a void to a reduced pressure; covering the evacuation hole with an evacuation head comprising a heating element, the evacuation head having substantially hermetic contact to the first glass pane; arranging the glass panes, the plurality of pillars, the peripheral seal, and the evacuation head in an oven; heating the oven according to a predetermined profile of oven temperatures T1 and compensating for a difference in temperature between the temperatures T1 and a temperature T2 under the evacuation head by activating the heating element to increase the temperature T2 to equal the temperature T1; evacuating the void through the evacuation head after completion of the heating; and sealing the evacuation hole.
US10704315B2
An obstacle detection sensor system for a movable panel of a motor vehicle includes an obstacle detection sensor disposed on an articulating mount, the obstacle detection sensor and articulating mount being hidden from view by an exterior surface of the motor vehicle in a first position, and the articulating mount providing the obstacle detection sensor with a sensor detection range including an exterior surface of the movable panel in a second position. Movement of the articulating mount from the first position to the second position and from the second position to the first position is coupled to movement of the movable panel.
US10704309B2
A shower door and hinge assembly comprising a glass shower door, a sloping sill, a sill angle adapter, upper and lower horizontal door frame rails, and upper and lower shower door hinges where the lower hinge is a gravity style hinge featuring a self-closing action, is presented. The hinges of the present invention shower door and hinge assembly attach only to horizontal edge surfaces of the glass door. The hinges do not attach to any vertical surface of the door.
US10704308B2
A window balance assembly may include a carrier, a spring element, and a mounting bracket. The spring element may include first and second portions. The first portion may be coupled to the carrier. The mounting bracket may engage the second portion of the spring element and may selectively engage the carrier.
US10704306B2
A tunable stay device for an aircraft closure has a mounting base that is mountable to the closure or in an area of the aircraft in close proximity to the closure. The mounting base extends, at least in part, along a mounting axis. A holding element is mounted for movement along the mounting axis and configured to effect, at least in part, a hold force. An adjuster is mounted to at least one of the mounting base and the holding element and is configured and arranged to effect a change in position of the holding element with respect to the mounting base along the mounting axis. When the stay device is mounted to the closure or in the area of the aircraft in proximity to the closure, the hold force biases the closure in one of an open orientation and a closed orientation.
US10704302B2
A motor vehicle door lock apparatus includes a meshing mechanism to mesh with a striker, a locking and unlocking mechanism switches between an unlocking state where a meshing can be released and a locking state where a meshing cannot be released, a control unit to authenticate a transmitter signal and to enable an outside operation switch when the transmitter is authenticated with the transmitter situated outside a vehicle, and an electric releasing mechanism to release a meshing as a result of the control unit driving the releasing motor to activate a releasing operation based on the outside operation switch when the control unit authenticates the transmitter, and the control unit switches from an authenticating state to a non-authenticating state when the transmitter outside the vehicle leaves an authenticating area and drives a locking and unlocking motor activating a locking operation when the control unit is switched to the non-authenticating state.
US10704292B2
Certain aspects of the technology disclosed herein include an apparatus and method for storing energy in a electromechanical lock. The electromechanical lock can include a main housing and a deadbolt. The main housing can be configured to extend a deadbolt along a path to lock and/or unlock a door. The deadbolt can have a hollow inner region configured to receive an energy storage device. The energy storage device within the deadbolt can be electrically connected to the main housing. The energy storage device can be used to power an actuator and/or accelerometer in the main housing.
US10704291B2
Portable, collapsible, lightweight housing structure for outdoors, and a method of assembling, and using the same. The invention encompasses an apparatus for providing shelter for humans and animals, which is portable, collapsible, and easily transportable from location to location, and can be quickly assembled, and disassembled. The apparatus comprises of a tubular frame, where a flat housing panel is wrapped around the tubular frame, and a cover is secured to the top of the assembly to from the portable, collapsible, lightweight housing structure or the quick assembly hunting blind or hunting blind kit. The portable, collapsible apparatus, has a ceiling or roof, and wall or panels that are made of one or more layers of material, such as, corrugated material, plastic material, composite material, waterproof material, weatherproof material, rigid honeycomb board material, polyethylene material, polypropylene material. The inventive apparatus could also have an attachable or detachable base or floor.
US10704289B1
A portable shelter having an inflatable frame that is lightweight and collapsible so that it can easily be transported from one place to the next without transporting heavy spars. The inflatable frame has only one external valve for inflation but creates a complex structure of circles, triangles and diamond-like shapes that provide a rigid and stable frame for a plurality of covering shells. The portable shelter adapts to any climate or circumstance by having an outer shell and an inner shell that can be easily modified accordingly. The portable shelter has solar panels that provide power to a power system and a storage battery therein to power an air pump to inflate the portable shelter frame. The portable shelter is completely self-sustaining. A plurality of portable shelters may be arranged into a self-sustaining village for people displaced by poverty, violent conflict and natural disasters.
US10704282B2
Pool cleaners are disclosed relating to underwater vacuum cleaning that include a main body, a debris discharge opening, a debris suction opening and a pressure chamber. The pressure chamber may be arranged around an unobstructed cylindrical flow path with the pressure chamber being positioned between the debris discharge opening and the debris suction opening such that water discharged from the pressure chamber directs debris into a debris bag. The cleaners may further be configured to operate by way of a submersible pump, submersible electric motor and a battery.
US10704275B2
A device for leveling and aligning tiles and method for leveling and aligning tiles are disclosed. In one embodiment, the leveling device includes a body and two spaced and parallel strip members extending transversely from the body. Each of the spaced and parallel strip members extend to the front and rear of the body. Two opposing lateral open windows are formed in the body. A breakaway section is defined along the body. A wedge device is provided for penetrating one or more of the two opposing lateral open windows and exerting a force on the tiles for leveling them relative to each other.
US10704270B2
Disclosed herein are a rigid tile including a foam cushion layer and a reinforcing layer, and a production method thereof.
US10704267B1
Extruded floorboards having integrated standoffs, or legs, to offset them from the ground or floor underneath, are disclosed in which adjacent floorboards share a common leg for standing off. On each side of the cross section of a floorboard, a shorter leg mates with a longer leg of an adjacent floorboard through a tongue & groove. The mated legs are supported by the longer leg and a foot at the bottom of the longer leg. A stiffening rib is included. The longer leg is longer than the shorter leg and stiffening rig by a predetermined distance so as to leave clearance for air bearings or other components underneath an assembled floor.
US10704266B1
A roofing component formed of polyethylene thermoplastic treated to prevent degradation due to exposure to ultraviolet (UV) light and an apparatus and method of forming the same. The UV treatment may include one or more of a UV absorber and a UV inhibitor. In one embodiment, the UV absorber comprises carbon black that is mixed with the polyethylene thermoplastic. The roofing component can comprise step flashing or a shingle.
US10704258B2
A data center includes a floor that supports rack computing systems and walls that enclose a computing room. The computing room holds the rack computing systems. One of the walls is a movable wall. The movable wall translates relative to the other walls to increase or decrease the size of the computing room.
US10704252B2
A method for lifting and supporting above ground a concrete slab foundation employing hydraulic jacks includes installing piers in the ground, each with a pier extension protruding above ground. A lifting assembly is placed over each pier extension, the lifting assembly having a lift sleeve and upward extending lifting members. Then the slab foundation is poured, bonding a portion of the lifting assembly in concrete. After the slab foundation hardens, a jack is positioned on top of the pier extension, and lifting arms of the jack engage the lifting members. The jack is actuated to exert an upward force on the lifting assembly to lift the slab foundation above the ground. Then, the lift sleeve is rigidly secured to the pier extension, allowing the jack and lifting arms to be removed.
US10704251B1
A modular housing system and methods for using the same are provided. In accordance with some embodiments of the disclosed subject matter, the modular housing system comprises: a plurality of prefabricated system modules that are vertically aligned with each other and joined with a first fastener assembly to form a central system module having a front perimeter portion and a rear perimeter portion; a mechanical, electrical, and plumbing (MEP) module that is connected to the rear perimeter portion of the central system module; an elevator module that is connected to the front perimeter portion of the central system module; and a plurality of prefabricated housing modules that are connected to the central system module, the MEP module, and the elevator module, wherein each of the plurality of prefabricated housing modules is vertically aligned with each other to form a stacked housing unit and joined to the central system module and the elevator module with a second fastener assembly.
US10704249B2
A mechanical closure device comprises an enclosure having four sides, a top and bottom and defining a discharge opening at the bottom. A floodgate assembly is interiorly removably mounted to the enclosure and comprises a pair of doors pivoted on a hinge assembly between an opened position and closed position. In the closed position, the doors seal against the flange to prevent passage of water through the discharge opening. A discharge drain assembly is preferably disposed on one door and has an opened and a closed position. An appendage is provided to facilitate opening and of the door. Upon removal, the floodgate assembly is stably positionable on a multipositionable service rack. A multipurpose tool is employed unlatching the floodgate doors and slidably removing the floodgate assembly.
US10704248B2
A drainage system (1) for installation in a wet area such as a shower stall. The drainage system (1) comprises an outer drainage conduit (2) adapted to extend within a subfloor (100) of a wet area and an inner drainage conduit (3). The conduit (2) comprises a rim (20) and a pipe body (21). The inner drainage conduit (3) also comprises a rim (30) and a pipe body (31). The rim (30) and pipe body (31) are nestable within the outer drainage conduit (2). When nested, the pipe bodies (21, 31) are adapted to be connectively sealed together using sealant, the rims (20, 30) are adapted to hold a waterproofing membrane (107) between the rims (20, 30) and to be connectively sealed in a water-tight manner to the waterproofing membrane (107) using sealant or, in the absence of a waterproofing membrane (107), the rims (20, 30) are adapted to be connectively sealed together using sealant in a water-tight manner.
US10704241B2
A sink with an integrally formed an inconspicuous storage space including a storage shelf. The sink has a basin portion and a niche that is integrally formed into the basin and extends substantially along the basin widthwise. The niche is an open area surrounded by three walls including a substantially horizontal floor that forms a substantially horizontal shelf, a substantially vertical wall, and a substantially horizontal ceiling disposed above the floor. The shelf may be used to store dishwashing accessories such as sponges and pads, and other items. The niche is aesthetically pleasing because it is not viewable from the front of the sink and can be seen only from the interior of the sink.
US10704238B2
A perpetual flow faucet assembly includes an inflow fitting that is fluidly coupled to a fluid source. A ball valve is positioned within the inflow fitting. The ball valve is positionable in an open position thereby facilitating a fluid to flow through the inflow valve. Additionally, the ball valve is positionable in a closed position thereby inhibiting the fluid to flow through the inflow valve. An outflow fitting is fluidly coupled to the inflow fitting such that the outflow fitting receives the fluid from the ball valve when the ball valve is opened. An outflow restrictor is positioned within the outflow fitting for restricting a rate of flow of the fluid through the outflow fitting. A spout is fluidly coupled to the outflow fitting such that the spout receives the fluid when the ball valve is opened thereby directing the fluid into the dipping well.
US10704237B2
A cold water recycling and reusing apparatus includes a water inlet pipe, a cold water recycling apparatus, a recycling pipe, a cold water return apparatus, a return pipe, a recycling container, and a water outlet terminal. The cold water recycling apparatus is installed at a location near the water outlet terminal. The cold water return apparatus is installed at a location behind the cold water recycling apparatus. The cold water recycling apparatus enables cold water to flow into the recycling container via the recycling pipe. The cold water return apparatus draws the water in the recycling container into the water inlet pipe via the return pipe. The water is adapted to mix with hot water and flows out of the water outlet terminal.
US10704231B1
A front loader includes a boom to which a bucket or a working implement other than the bucket is attached, a boom cylinder to move the boom, a first control valve to supply an operation fluid to the boom cylinder, a supporting member supporting the boom on a front portion of a vehicle body of a work machine, an attachment frame extending backward from the supporting member. The attachment frame is attached to a side portion of the vehicle body. The front loader further includes a second control valve to supply the operation fluid to the working implement. The second control valve is attached to the attachment frame.
US10704221B2
A lockable manhole cover system including a manhole cover and a locking mechanism attached to the bottom surface thereof and including a fixed end and an actuated end, each including locking pins movable between locked and unlocked positions. The actuated end includes a keyed lock. When in the locked position, the free ends of the locking pins extend beneath a flange prevent the cover from being lifted up. When the actuated side is moved to the unlocked position via the key, the locking pin free ends retract such that the cover is free to be lifted from the ring. On the fixed side, the locking pins are biased to move to their extended positions upon manual depression of a release stem located at the upper surface of the cover.
US10704215B2
A composite bridge deck including U shaped reinforced concrete and steel girders, and construction methods thereof. The bridge deck consists of a plurality of steel main girders with unsymmetrical top flange, the plurality of cross girders being connected above bottom flange of main girders and U shaped RCC girder comprising of concrete flange above main girder, web and deck slab above cross girder. Inspection path/crash barrier provided for Rail/Road. This bridge deck is adoptable up to 3 Tracks/four lane Roads. In Cast in situ construction, main girders are placed over supports. Cross girders are connected and concreted. In precast construction, main girder with top slab is precast and placed over supports. Two or more cross girders with precast slab are connected to web of main girder. Concrete web portion is cast in situ.
US10704213B2
The present invention relates to a method for controlling a height adjustment of a stripping plate of a ground milling machine, in particular a stripping plate of a cold milling machine, during the working process, said method comprising the following steps of detecting the striking of the stripping plate against an obstacle; automatically triggering the height adjustment unit for lifting the stripping plate from a working position, in which the stripping plate is in contact with the underlying ground to be processed, to avoid a further collision with the obstacle; and automatically triggering the height adjustment unit for lowering the stripping plate back to the working position upon overcoming the obstacle.
US10704212B2
A method for coupling a machine frame (12) of an earth working machine (10) to a working device (28) between the machine frame (12) and a substrate (U) encompasses the following steps: arranging the machine frame (12) and the working device (28) between the machine frame (12) and the substrate (U); aligning the receiving portion (42) and working device (28) relative to one another in such a way that fastening formations (56, 60) of the working device (28) are lined up, along a spacing direction, with fastening counter-formations (58, 62) of the machine frame (12); bringing the fastening formations (56, 60) and fastening counter-formations (58, 62) closer to one another; and operably fastening the working device (28) onto the receiving portion (42). According to the present invention the aligning step encompasses the following sub-steps: connecting the machine frame (12) and the working device (28) to one another by means of a connecting apparatus (76), in such a way that the working device (28) is movable in response to its weight, parallel to the effective direction of gravity (g) and orthogonally thereto, relative to the machine frame (12); then allowing the working device (28) to hang on the machine frame (12); and then supporting the working device (28).
US10704210B2
An asphalt mix tracking system having a data collection system adapted to determine at least one characteristic of the asphalt mix, a data control system adapted to receive data from the data collection system, a lot tracking system adapted to track a lot of the asphalt mix, a truck tracking system adapted to track a truck, and a pavement injection system adapted to identify the lot of the asphalt mix. The preferred asphalt mix tracking system is adapted to substantially continuously track the asphalt mix from a mixing site to a paving site. A method for tracking an asphalt mix including determining the at least one characteristic of the asphalt mix, communicating the at least one characteristic of the asphalt mix to the data control system, transporting the asphalt mix from the mixing site to the paving site, and injecting an identification means at the paving site.
US10704209B2
A slipform paver comprises a machine frame carried by rolling assemblies, at least two of which being drivable and at least one being steerable, as well as comprising a support arranged on the machine frame for a slipform mould and a controller for controlling the rolling assemblies to adjust the velocities of the drivable rolling assemblies and the steering angles of the one or more steerable rolling assemblies. The controller is configured such that, when the steering angles of the one or more steerable rolling assemblies change, the velocities of the drivable rolling assemblies are adjusted so as to reduce the change in the velocity at which a reference point referring to the support for the slipform mould will move along a predefined trajectory, said change in velocity being caused by changing the steering angle. The quality of the concrete profile produced by the slipform paver is thereby improved.
US10704208B1
A wheeled asphalt paver vehicle provides a combination of a remixing hopper and a paving screed in a single vehicle. An optional loading conveyor carried by the vehicle facilitates loading of asphalt mix or other paving material into the hopper. A mixer within a lower portion of the hopper keeps the asphalt materials mixed therein. An output conveyor draws asphalt material from the hopper and into a screed for laying onto a surface over which the vehicle is traveling. An optional flow diverter between the output conveyor and the screed is adjustable to provide a greater proportion of the asphalt material to a left side or a right side of the screed. The vehicle can conveniently be controlled by fewer operators than when a separate paver vehicle and a separate remixer vehicle are utilized.
US10704207B2
A material spreader is mountable to a rearwardly projecting bumper of a vehicle for conveying and spreading material, the vehicle including a rearwardly projecting hitch receiver. The material spreader includes a hopper for holding material to be spread, a frame supporting the hopper and having a forwardly projecting hitch mount configured for coupling to the rearwardly projecting hitch receiver of the vehicle, and a support member having an underside for resting atop a top surface of the bumper, the support member being movable vertically relative to the frame. A tie down is connected to the support member and the frame for urging the support member and the hitch mount towards one another to effect a clamping action on the receiver and the bumper. The material spreader also includes a dual hinged lid and a gear box for driving a spinner and an auger.
US10704205B2
A holddown assembly fastens a railway rail to a transversely extending hollow sleeper formed with a vertically throughgoing hole. An upwardly projecting lateral brace element is provided on the sleeper offset from the hole, and the assembly has a body fitted between the rail and the brace element and transversely bracing the rail against the brace element. An anchor of the assembly is engaged through the hole, projects upward from the sleeper, is transversely shiftable in the hole, and bears upward on the sleeper. A spring clip is pressed by the anchor down against the rail and presses the rail down against the metal sleeper.
US10704195B2
A method is provided for manufacturing a multistrand cable having a 1×N structure and including a single layer of N strands wound in a helix. Each strand includes an internal layer of M internal threads and an external layer of P external threads. The method includes a step of individually assembling each of the N strands, during which, in chronological order, the M internal threads are wound, the P external threads are wound, and the M internal threads and the P external threads are elongated such that a structural elongation associated with the P external threads of each strand is greater than or equal to 0.05%. The method further includes a step of collectively assembling the N strands, during which the N strands are wound to form the cable.
US10704190B2
A clothing treatment apparatus is disclosed. The clothing treatment apparatus includes a first body detachably mounted on a wall, a second body rotatably or extendably provided at the first body to define a space for accommodating clothes, a rack provided at the first body or the second body, on which clothes are hung, and a hot air supply provided in the first body to supply hot air to clothes hung on the rack. The clothing treatment apparatus, mountable on a wall, enables efficient use of the clothing treatment space.
US10704182B2
A method of delivering a flexible water-soluble unit dose article to the drum or drawer of a fabric washing machine or to an automatic ware washing machine, comprising the steps of; a. obtaining a unit dose article in a container, wherein the container is configured to allow one unit dose article to be ejected from the container at a time; b. positioning the container near the drawer, drum or other reception point; c. ejecting the unit dose article from the container directly in the drum, drawer or other reception point; d. removing the container from the position near the drawer, drum or other reception point; e. initiating the wash operation of the fabric washing machine or automatic ware washing machine.
US10704179B2
The present disclosure provides a support for household appliance and a household appliance. The support for household appliance comprises a hydraulic plate; a sheath, which is fixedly connected with the hydraulic plate; a regulating element, which is arranged in the sheath and is axially movable relative to the sheath; an accommodation chamber, which is formed by the hydraulic plate, the sheath and the regulating element; a hydraulic medium, which is arranged in the accommodation chamber and is compressed/expands depending on pressure changes to drive the regulating element to axially move in the sheath for leveling; a communicating device, which enables at least two supports for household appliance to communicate with each other to allow the hydraulic medium to flow between the supports for household appliance; a one-way valve structure is arranged in the communicating device for conducting the hydraulic medium to flow in one direction.
US10704157B2
The present invention provides an aqueous treatment solution containing sulfate ions SO42− in a concentration greater than or equal to 0.01 mol/l, to treat sheet metal including a steel substrate coated on at least one face with a coating including at least zinc and magnesium to reduce blackening or tarnishing of the sheet metal during storage. The present invention also provides a sheet metal treated with a solution of this type.
US10704141B2
Embodiments of the systems and methods herein are directed towards forming, via ALD or CVD, a protective film in-situ on a plurality of interior components of a process chamber. The interior components coated with the protective film include a chamber sidewall, a chamber bottom, a substrate support pedestal, a showerhead, and a chamber top. The protective film can be of various compositions including amorphous Si, carbosilane, polysilicon, SiC, SiN, SiO2, Al2O3, AlON, HfO2, or Ni3Al, and can vary in thickness from about 80 nm to about 250 nm.
US10704134B2
Components for an automatic motor vehicle transmission including a band brake drum, a clutch housing or hub having a seal surface or a clutch housing or hub utilized in a friction clutch assembly having a spline set. All of these components are fabricated of aluminum and the outer surface of the band brake drum, the housing or hub sealing surface and the area of the spline set includes a thin coating of a thermally sprayed steel material. The thermally sprayed steel material may be a low carbon steel such as SAE 1008 or 1010, a similar alloy, iron or other metal. The resulting components thus exhibit the weight saving of aluminum while providing excellent service life due to the enhanced strength and wear resistance provided by the thermally sprayed steel coating.
US10704133B2
A system and method described herein relate to applying an overlay metal-based coating to a metal-based substrate. An article is provided, which includes a metal-based substrate having an overlay metal-based coating disposed on the substrate at an interface. The interface is configured such that a crack formed within the overlay metal-based coating and approaching the interface has a propagation path that is more energetically favorable along the interface than through the interface and into the metal-based substrate.
US10704132B2
A high-strength hot-dip galvanized steel sheet excellent in impact resistance and worked portion corrosion resistance including a hot-dip galvanized plating layer on a steel sheet base material whose tensile strength is 590 MPa or more, wherein the plating layer includes projecting alloy layers being in contact with the steel sheet base material, a number density of the projecting alloy layers is 4 pieces/mm or more, wherein the steel sheet base material includes: a miniaturized layer being directly in contact with the interface between the steel sheet base material and the plating layer; a decarburized layer being in contact with the miniaturized layer; and an inner layer other than the miniaturized layer and the decarburized layer, and one or more kinds of oxides of Si and Mn are contained in layers of the miniaturized layer, the decarburized layer, and the projecting alloy layers.
US10704119B2
Examples herein generally relate to sinter blend compositions for use in a sintering process that do not contain coke breeze (0.0% coke breeze), or contain only very small amounts of coke breeze. In particular, these sinter blend compositions are capable of repurposing mixture of iron-making reverts, having high total and metallic iron levels that re-oxidize so as to become a replacement fuel source for the coke breeze typically used in sinter blend compositions for use in a sintering process, while still managing to produce a sinter with sufficient ISO tumble strengths.
US10704117B2
Provided are a cold-rolled steel sheet which can preferably be used for manufacturing a high-strength galvanized steel sheet and methods for manufacturing the steel sheets. The cold-rolled steel sheet has a specified chemical composition, in which the Mn concentration in a surface layer of the steel sheet satisfies relational expression (1) and relational expression (2) below. 8≤(Cp/Cc)×Mn . . . (1) (Cmin/Cc)×Mn≤2.5 . . . (2) where Cp: maximum Mn concentration in a region within 0.5 μm of the surface of a steel sheet in the thickness direction; Cc: average Mn concentration in a region from a position located 5 μm from a surface of a steel sheet in the thickness direction to a position located 5 μm from an opposite surface in the thickness direction; Cmin: minimum Mn concentration in a region from 0.5 μm to 5 μm from the surface of a steel sheet in the thickness direction; and Mn: Mn content (mass %).
US10704115B2
Non-oriented electrical steel sheet and method for manufacturing non-oriented electrical steel sheet
Disclosed is a non-oriented electrical steel sheet that is low in iron loss and exhibits excellent magnetic properties even when subjected to final annealing at high temperature. The non-oriented electrical steel sheet can be obtained from a steel (low-Al steel) having a chemical composition containing, in mass %, C: 0.005% or less, Si: 1.0% to 4.5%, Mn: 0.02% to 2.0%, Sol. Al: 0.001% or less, P: 0.2% or less, S+Se: 0.0010% or less, N: 0.005% or less, O: 0.005% or less, and Cu: 0.02% to 0.30%, and the balance consisting of Fe and incidental impurities.
US10704112B2
A process for producing a steel component with a metallic, corrosion protection coating and very good mechanical properties may involve directly applying an iron-based alloy to a steel substrate. The iron-based alloy may contain 50-80% by weight of Fe, 0-30% by weight of Mg, 0-5% by weight of Al, 0-5% by weight of Ti, 0-10% by weight of Si, 0-10% by weight of Li, 0-10% by weight of Ca, 0-30% by weight of Mn, and a balance of Zn and unavoidable impurities. The steel substrate that has been coated with the iron-based alloy may then be subjected to hot forming in order to obtain the steel component. A metallic coating that protects against corrosion for steel components to be produced by the process of hot forming can be obtained.
US10704109B2
This invention intends to develop many DNA markers for a plant of the genus Fragaria and identify everbearing lines with high precision by using the many DNA markers. The marker associated with everbearing properties in a plant of the genus Fragaria comprises a continuous nucleic acid region sandwiched between the nucleotide sequence as shown in SEQ ID NO: 1 and the nucleotide sequence as shown in SEQ ID NO: 5 in the chromosome of the plant of the genus Fragaria.
US10704105B2
Phosphatidylinositol 3-kinases (PI3Ks) are known to be important regulators of signaling pathways. To determine whether PI3Ks are genetically altered in cancers, we analyzed the sequences of the PI3K gene family and discovered that one family member, PIK3CA, is frequently mutated in cancers of the colon and other organs. The majority of mutations clustered near two positions within the PI3K helical or kinase domains. PIK3CA represents one of the most highly mutated oncogenes yet identified in human cancers and is useful as a diagnostic and therapeutic target.
US10704100B2
The application discloses circRNAs as new biomarkers for the development of heart failure after myocardial infarction; methods for the prediction and diagnosis of heart failure are provided based on measuring said one or more circRNAs; and kits and devices for measuring said circRNAs and/or performing said methods. Further provided are methods for treating patients at risk of heart failure based on the evaluation of said one or more circRNAs.
US10704098B2
Compositions and methods for the treatment and diagnosis of eosinophilic esophagitis disclosed.
US10704086B2
The present disclosure provides a system and method for the detection of rare mutations and copy number variations in cell free polynucleotides. Generally, the systems and methods comprise sample preparation, or the extraction and isolation of cell free polynucleotide sequences from a bodily fluid; subsequent sequencing of cell free polynucleotides by techniques known in the art; and application of bioinformatics tools to detect rare mutations and copy number variations as compared to a reference. The systems and methods also may contain a database or collection of different rare mutations or copy number variation profiles of different diseases, to be used as additional references in aiding detection of rare mutations, copy number variation profiling or general genetic profiling of a disease.
US10704076B2
A high through-put screening method for identifying agents effective for inhibiting biofilm formation and/or killing established biofilm are disclosed. The method includes three tiers, and each tier includes three specific biological process assays. The tier levels are a primary screen, a confirmation screen, and a dose-response screen, and the biological process assays include assays for total bacterial growth, bacterial metabolic activity, and biofilm formation. The series of assays may be run once or more than once at each tier. A library of compounds is subject to tier A and only compounds meeting a primary parameter advance to tier B, and only tier B compounds meeting a confirmation parameter advance to tier C, and only tier C compounds meeting a dose-response parameter are identified as putative agents effective for inhibiting and/or eradicating a biofilm, further wherein the assays are conducted for each compound subject to the respective tier. The method is effective and validated for identifying agents which inhibit and/or kill Staphylococcus epidermidis, Pseudomonas aeruginosa, and Acinetobacter baumannii biofilms. Agents identified according to the high through-put screen and validated in follow-up experiments as effective for inhibiting and/or killing bacterial biofilms are also disclosed.
US10704075B2
The invention concerns a method for determining the reaction of at least one bacterium of interest to its exposure to an antibiotic implementing a Raman spectroscopy analysis comprising the following steps: Having a biological sample that could contain said bacteria of interest, Preparing at least two fractions of said sample each comprising one or more living bacteria of interest, Capturing, in each fraction, at least one living bacterium of interest by using a binding partner, Exposing at least one of the fractions to at least one concentration of at least one given antibiotic, the other of the fractions being the control fraction, Submitting the bacterium/bacteria of interest contained in the fractions to an incident light and analyzing the resultant light obtained by Raman diffusion by the bacterium/bacteria of interest by Raman spectroscopy in order to obtain as many Raman spectra as bacteria, Treating said spectra in order to obtain a signature of the reaction of the or each bacterium/bacteria of interest to the exposure to said antibiotic and of the control, Comparing the signature obtained accordingly per bacterium of interest to a reference base defined under the same conditions as above, for different bacteria and at least said antibiotic, and Defining a sensitivity clinical profile of said bacterium of interest to said antibiotic.
US10704071B2
The present invention provides methods and compositions for reducing lactate production and increasing polypeptide production in cultured cells. In one aspect, the invention provides a method comprising culturing cells expressing a) a small interfering RNA (siRNA) specific for a lactate dehydrogenase (LDH) and b) an siRNA specific for a pyruvate dehydrogenase kinase (PDHK). In another aspect, the invention provides cultured cells or vectors comprising an siRNA specific for a LDH and an siRNA specific for a PDHK.
US10704063B2
A process of producing methacrylic acid and/or derivatives thereof including the following steps: (a) biologically converting isobutyryl-CoA into methacrylyl-CoA by the action of an oxidase; and (b) converting methacrylyl-CoA into methacrylic acid and/or derivatives thereof. The invention also extends to microorganisms adapted to conduct the steps of the process.
US10704056B2
The present invention provides for compositions comprising mutated PYR/PYL receptor polypeptides that bind to a type 2 protein phosphatase in the absence of abscisic acid. The present invention further provides for methods of making and using the mutated PYR/PYL receptor polypeptides.
US10704054B2
The present invention provides a polynucleotide which enables the modulation of the seed vigour, and in particular enhances the seed vigour, and more particularly enables the modification of the speed of germination. A plant seed comprising the said polynucleotide is also provided. A method of producing the plant seed, method for improving the germination and vigour of plant seed, transgenic plant and the use of the polynucleotide of the invention for producing plants growing seeds with improved germination and vigour characteristics are also provided. The invention particularly concerns Brassica, more particularly Brassica oleracea.
US10704052B2
The process and system led to the identification of prenyltransferase genes from elicitor-treated peanut hairy roots. One of the prenyltransferases, AhR4DT-1 catalyzes a key reaction involved in the biosynthesis of prenylated stilbenoids, in which resveratrol is prenylated at its C-4 position to form arachidin-2, while another, AhR3′DT-1, was able to add the prenyl group to C-3′ of resveratrol. Each of these prenyltransferases has a high specificity for stilbenoid substrates, and their subcellular location in the plastid was confirmed by fluorescence microscopy. Structure analysis of the prenylated stilbenoids suggest that these two prenyltransferase activities represent the first committed steps in the biosynthesis of a large number of prenylated stilbenoids and their derivatives in peanut.
US10704048B2
Expression of micoRNAs that negatively regulate the activity of the SNHG14 gene for can be used in treatment of Angelman Syndrome. Such microRNAs include, for example, MIR-92a and/or MIR-145, as well as analogues and variants thereof, for use in treatment of Angelman Syndrome. Expression vectors such as, for example, AAV vectors may be used to transduce cells for introduction of MIR-92a and/or MIR-145 into target tissues for treatment of Angelman Syndrome.
US10704035B2
Embodied herein are engineered fusion proteins that bind and target nociceptor neurons, compositions comprising these engineered fusion proteins, and methods for treatment of pain using these engineered fusion proteins or compositions containing the engineered fusion proteins. The engineered fusion proteins contain domains derived from protein toxins such as the anthrax toxin, clostridial botulinum family of toxins, disulphide-containing toxins, and AB component type toxins.
US10704029B2
The present invention relates to a mutant 3-hydroxybutyrate dehydrogenase (3-HBDH) with improved performance relative to the wild-type 3-HBDH, a nucleic acid encoding the mutant 3-HBDH, a cell comprising the mutant 3-HBDH or the nucleic acid, a method of determining the amount or concentration of 3-hydroxybutyrate in a sample, and a device for determining the amount or concentration of 3-hydroxybutyrate in a sample.
US10704027B2
Provided is a novel bacteriophage ΦCJ23 (KCCM11365P). In addition, the present invention relates to an antibacterial composition including the bacteriophage ΦCJ23 (KCCM11365P) as an active ingredient. Further, provided is a method of preventing and/or treating infectious diseases by avian pathogenic Escherichia coli(APEC) in birds using the bacteriophage ΦCJ23(KCCM11365P) or the antibacterial composition containing the bacteriophage ΦCJ23(KCCM11365P) as an active ingredient.
US10704023B2
Described are embodiments that include methods and devices for separating composite liquids into components. Embodiments involve the use of a flexible membrane for separating a composite liquid into components. The composite liquid may include, in embodiments, a cellular containing liquid, such as whole blood or components of whole blood. In one specific embodiment, the composite liquid is a buffy coat.
US10704018B2
Microfluidic devices and methods for perfusing a cell with perfusion fluid are provided herein, wherein the gravitational forces acting on the cell to keep the cell at or near a retainer or a retaining position exceed the hydrodynamic forces acting on the cell to move it toward an outlet. Also provided, are methods for assaying cell products within the microfluidic device.
US10704015B2
The apparatus herein relates to the large-scale production of photosynthetic microorganisms, especially algae. More particularly it relates to control of large size aqueous photosynthetic bioreactor systems to obtain such products from many microbial strains, which have heretofore only been cultured in laboratory environments in small containers.
US10704013B2
The present invention provides a washing product comprising two or more sheets, which comprise a water-soluble polymer and have different dissolution rates in water, wherein each sheet contains i) washing detergent components, ii) washing softening components, iii) an aromatic agent, or iv) two or more thereof. Since two or more sheets have the different dissolution rates, in the present invention, the discharge time of the washing components contained in the sheets can be controlled, thereby having an excellent washing effect.
US10704012B2
A method for formulating a cleaning composition contains the step of coating a granular absorbent material with a coating agent to produce a coated absorbent material and mixing the coated absorbent material with a sanitation agent, wherein the coated absorbent material absorbs the sanitation agent to form the cleaning composition. The resulting cleaning composition may be used for cleaning up pathogens or hazardous materials. The cleaning composition may also function as a liquefiable dry cleaning powder for public areas in response to bodily fluid incidents. A coating method of a non-toxic bio static film on a high surface area solid is disclosed.
US10704011B2
The present invention provides improved processes for extracting and preparing lipids from biological sources for use in pharmaceuticals, nutraceuticals and functional foods.
US10704010B2
A grease of the invention contains a base oil and a thickener, where, when the volumetric-based arithmetic mean particle size of particles contained in the grease measured using laser diffraction/scattering method is A (unit: μm), a formula A≤3 (1) is satisfied.
US10704003B2
The invention relates to an oil-in-water emulsion comprising an oil phase and an aqueous phase, and a primary surfactant, wherein the oil phase is dispersed in the aqueous phase, and wherein the oil-in-water emulsion has: an average droplet size distribution (D[4,3]) in the range of from 3 to 15 um and less than 3 wt % of the droplets have a particle size of greater than 125 um; a viscosity of greater than 100 and up to 700 mPas at 50° C.+−10% and 20 s−1+−10%; and a static stability of less than 5% residue after centrifugation at 50° C.+−10% and 2000 g=10% for 30 minutes+−10%.
US10703998B2
The invention is an integrated process for treating residual oil of a hydrocarbon feedstock. The oil is first subjected to hydrodemetallization and then gas phase oxidative desulfurization. Additional, optional steps including hydrodesulfurization, and hydrocracking, may also be incorporated in to the integrated process.
US10703991B2
An ebullated bed process for the hydroconversion of heavy hydrocarbon feedstocks that provides for high conversion of the heavy hydrocarbon with a low sediment yield. The process uses for its catalyst bed an impregnated shaped ebullated bed catalyst having a low macroporosity and a geometry such that its characteristic cross section perimeter-to-cross sectional area is within a specifically defined range.
US10703977B2
Processes and apparatuses for co-processing pyrolysis effluent and a hydrocarbon stream in which a char produced by the catalytic cracking of the pyrolysis effluent is recovered and utilized to provide energy, such as heat to the catalytic cracking zone. The char can be burned in various combustion zones associated with the catalytic cracking zone. The char is produced from a renewable resource.
US10703976B2
A pyrolyzed coal quencher includes: a first water spray tube 79 that sprays water on pyrolyzed coal having a temperature of 300° C. or more obtained after pyrolyzing coal; a first cooling tube 80 that performs indirect cooling on the pyrolyzed coal obtained after spraying water by the first water spray tube 79 to a temperature of 100° C. or more; a second water spray tube 82 that sprays water on the pyrolyzed coal cooled by the first cooling tube 80 such that the pyrolyzed coal has a desired water content; and a second cooling tube 83 that performs indirect cooling on the pyrolyzed coal cooled by the first cooling tube 80 to a desired temperature of less than 100° C. Thus, the pyrolyzed coal can be promptly cooled and adjusted to a desired water content.
US10703974B2
Provided is a liquid crystal compound represented by formula I, the compound having a positive dielectric anisotropy, a great elastic constant and a good solubility. Further provided is a liquid crystal composition comprising the liquid crystal compound represented by formula I, the liquid crystal composition having a good stability against light and heat, a lower viscosity, a wider refractive index that may be achieved by the adjustment of the monomer ratio, and a higher clearing point (a very wide service temperature range), and in particular, the liquid crystal composition has a higher light transmittance, thus allowing a display device to have a higher brightness or an energy saving effect.
US10703972B2
A soil erosion inhibitor is provided that includes resin powder excellent in moisture absorption resistance. According to the present invention, a soil erosion inhibitor is provided that includes redispersible synthetic resin powder having a bulk density of 0.50 g/mL or less.
US10703962B2
Methods, compositions, and systems that use hydrogels of graft polymers for diversion of acidic treatment fluids in subterranean formations. A method for acid diversion may comprise: applying a first acidizing treatment to a first treatment zone of a subterranean formation; introducing a hydrogel to the first treatment zone, wherein the hydrogel comprises a graft polymer that is crosslinked; and applying a second acidizing treatment to the subterranean formation, wherein the hydrogel diverts the second acidizing treatment to a second treatment zone.
US10703961B2
Water-in-oil lattices of water soluble or dispersible polymers and methods of using the same are presented. The lattices include phosphorus functional inversion agents that provide rapid and complete inversion of the lattices under conditions wherein the water source used to invert the latex is provided at high temperature, or includes a high level of total dissolved solids, or is both high temperature and high total dissolved solids.
US10703949B2
An apparatus and method wherein potential ozone layer-damaging chlorodifluoromethane (Refrigerant R-22) is substituted with a mix of less environmentally damaging refrigerants pentafluoroethane and tetrafluoroethane in chlorodifluoromethane-based air-cooling systems mainly in residential cooling. While less environmentally damaging than chlorodifluoromethane, the substitute refrigerant has a temperature-pressure relationship similar to that of chlorodifluoromethane, making the substitute refrigerant suitable for use with chlorodifluoromethane-based air-cooling systems. In this event, it is mixed with a relatively small percentage of a lubricating oil which is compatible with both the unit refrigerant and typical R-22 system design.
US10703948B2
A method for producing heating in a high temperature heat pump having a heat exchanger is provided. The method comprises extracting heat from a working fluid, thereby producing a cooled working fluid wherein said working fluid comprises (2E)-1,1,1,4,5,5,5-heptafluoro-4-(trifluoromethyl)pent-2-ene (“HFO-153-10mzzy”). Also, a high temperature heat pump apparatus is provided containing a working fluid comprising HFO-153-10mzzy. Also a composition is provided comprising (i) a working fluid consisting essentially of HFO-153-10mzzy; and (ii) a stabilizer to prevent degradation at temperatures of 55° C. or above, or (iii) a lubricant suitable for use at 55° C. or above, or both (ii) and (iii).
US10703947B2
The slurry of the invention comprises abrasive grains and water, wherein the abrasive grains include tetravalent cerium hydroxide particles and produce light transmittance of at least 50%/cm for light with a wavelength of 500 nm in an aqueous dispersion with the content of the abrasive grains adjusted to 1.0 mass %. The polishing liquid of the invention comprises abrasive grains, an additive and water, wherein the abrasive grains include tetravalent cerium hydroxide particles and produce light transmittance of at least 50%/cm for light with a wavelength of 500 nm in an aqueous dispersion with the content of the abrasive grains adjusted to 1.0 mass %.
US10703936B2
To provide a technology by which, on the occasion of polishing an object to be polished including: (a) material having silicon-nitrogen bonds; and (b) other material, the ratio of the polishing speed for the material (a) with respect to the polishing speed for the material (b) can be increased.The polishing composition of the present invention is a polishing composition used for polishing an object to be polished including: (a) material having silicon-nitrogen bonds; and (b) other material, the polishing composition including: an organic acid-immobilized silica; and a particular selection ratio improver for increasing the ratio of the polishing speed for the material (a) with respect to the polishing speed for the material (b).
US10703934B2
Provided herein is a method of forming a multilayer coating film including coating, onto an object to be coated, a water-based primer coating composition, wet-on-wet coating a first water-based coloring coating composition, wet-on-wet coating a second water-based coloring coating composition, coating a clear coating composition, and simultaneous hardening of the formed multilayer coating film. The water-based primer coating composition contains a water-based polyolefin resin, a water-based polyurethane resin, a curing agent, and conductive carbon. The first and second water-based coloring coating compositions, each, as base resins, contain a core/shell-type emulsion including an acrylic resin core portion and a polyurethane resin shell portion. The clear coating composition contains a hydroxy-group-containing acrylic resin and a polyisocyanate compound.
US10703929B2
Aqueous polymer compositions and their use as coatings are disclosed. A composition includes at least one polyurethane (meth)acrylate A and at least one compound B having a molecular weight of below 1000 g/mol and having at least two ethylenically unsaturated double bonds per molecule. The polyurethane (meth)acrylates A include the following components: component A1 includes at least one polyisocyanate A1a and at least one diisocyanate A1b; component A2 includes at least one compound having at least one ethylenically unsaturated double bond, and at least one functional group F; component A3 includes at least one neutral polyol including at least one aliphatic, polymeric polyol A3a and at least one low molecular weight diol A3b; component A4 includes at least one compound having at least one ionic or ionizable group I′ and at least one functional group F′; and component A5 includes at least one poly-C2-C3 alkylene ether.
US10703926B2
Aqueous particle-free fluids can be used in inkjet printing methods including continuous inkjet printing processes. Each of these fluids has a dynamic viscosity of less than or equal to 5 centipoise (5 mPa-sec) at 25° C., and each consists essentially of: a composition consisting of one or more compounds represented by the following Structure (I): HO—CH2—CH2—R (I) wherein R is a substituted or unsubstituted phenyl group or a substituted or unsubstituted phenoxy group, in a total amount of at least 0.5 weight % and up to and including 2 weight %, based on the total weight of the aqueous inkjet ink composition. Such aqueous particle-free fluids can be used as replenishment or printhead maintenance fluids.
US10703925B2
Electrically-conductive ink compositions comprising: (i) a particulate, electrically-conductive material; (ii) a carrier liquid; (iii) a polymer binder; and (iv) a microcrystalline cellulose component; methods comprising: (a) providing a substrate; (b) providing an electrically-conductive ink formulation comprising (i) a particulate, electrically-conductive material; (ii) a carrier liquid; (iii) a polymer binder; and (iv) a microcrystalline cellulose component; and (c) forming an electrically-conductive trace on a surface of the substrate; and articles comprising a substrate having a surface and an electrically-conductive trace formed on the surface of the substrate, wherein the electrically-conductive trace comprises: (a) a particulate, electrically-conductive material; (b) a polymer binder; and (c) a microcrystalline cellulose component are described.
US10703919B2
The invention relates to a process for forming a wood-base product comprising the steps of a) providing particles of wood, b) resinating the particles of wood with a binder, c) compressing the resinated particles of wood to form a wood-base product, wherein before, during or after step b) the particles of wood and/or the binder are brought into contact with a broken dispersion. The invention also relates to the use of a polyfunctional compound as demulsifier for breaking a wax-containing dispersion. The invention further relates to a broken dispersion for hydrophobicizing lignocellulose-containing material. The invention additionally relates to a two-component system containing at least two components A and B: a wax-containing dispersion A) and a demulsifier B) having at least one functional group for breaking the wax-containing dispersion.
US10703916B2
A hot applied thermoplastic pavement composition and method of using wherein the composition comprises a modified polyamide resin in the range of between 3 and 10 percent by weight, wherein the composition contains rosin-modified esters, a copolymer, 30-70 percent by weight of a glass bead intermix, a range of between 1 and 15 percent by weight of either white or yellow pigment, the balance of the composition being selected from the group consisting of: one or more plasticizers, inorganic fillers, waxes, antioxidants and light stabilizers.
US10703906B2
Compositions that are curable to polythioether polymers are provided, comprising: a) a dithiol monomer; b) a diene monomer; c) a radical cleaved photoinitiator; d) a peroxide; and e) an amine; where the peroxide and amine together are a peroxide-amine redox initiator. In some embodiments, the amine is a tertiary amine. In some embodiments, the amine is selected from the group consisting of dihydroxyethyl-p-toluidine, N,N-diisopropylethylamine, and N, N, N′, N″, N″-pentamethyl-diethylenetriamine. In some embodiments, the peroxide is selected from the group consisting of di-tert-butyl peroxide, methyl ethyl ketone peroxide, and benzoyl peroxide. In some embodiments, the composition may additionally comprise a polythiol monomer having three or more thiol groups.
US10703897B2
The present application relates to a block copolymer and its use. The present application can provides a block copolymer that has an excellent self assembling property or phase separation property and therefore can be used in various applications and its use.
US10703885B2
To provide a tread rubber composition permitting improvement in wet performance without causing worsening of performance with respect to reduction in fuel consumption and/or wear-resistance. Relates to a tread rubber composition comprising a rubber component and particle-encapsulating microcapsules. The particle-encapsulating microcapsules comprise particles and capsule-like organic compound that encapsulates the particles.
US10703880B2
The present invention provides a plasticizer for a vinyl chloride resin including an ester compound (A1) represented by General Formula (1): (in the formula, L's each represent an aliphatic oxycarboxylic acid residue having 3 to 18 carbon atoms or a cyclic ester residue having 3 to 18 carbon atoms, R1's each represent an alkyl group having 6 to 18 carbon atoms, R2's each represent a hydrogen atom or an alkyl group having 1 to 6 carbon atoms, a represents a repeating number of the L, provided that the total of the plural a's is from 1 to 10, and x is an integer of 2 to 4), in order to provide a plasticizer for a vinyl chloride which has excellent compatibility with vinyl chloride resins and with which a vinyl chloride resin composition capable of providing a molded article having excellent freeze resistance and heat resistance can be obtained.
US10703875B2
The present invention relates to a solvent recovery apparatus and a solvent recovery method, and the solvent recovery apparatus and method according to the present application can reduce the used amount of steam in a synthetic rubber production process, and can reduce the used amount of energy by recovering the waste heat discarded through a condenser.
US10703874B2
The resin composition of the present invention comprises an alkenyl-substituted nadimide (A), a maleimide compound (B), and an amino-modified silicone (C).
US10703867B2
Irradiated material solids are thermally treated using a heat transfer liquid to improve the physical, chemical, mechanical and/or biochemical properties of the irradiated material solids.
US10703866B2
The present invention relates to halogenated containing polymer composition with a modifier that is a polymeric processing aid in form a non dusty polymer powder made by a multistage process while the last stage uses ethyl acrylate as major monomer.
US10703864B2
Polymeric BODIPY dyes including light harvesting BODIPY unit-comprising multichromophores are provided. In some embodiments, the dyes are polymeric tandem dyes that include a light harvesting BODIPY unit-comprising multichromophore and an acceptor chromophore covalently linked to the multichromophore in energy-receiving proximity therewith. The polymeric tandem dyes may be covalently linked to a specific binding member. Also provided are methods of evaluating a sample for the presence of a target analyte and methods of labelling a target molecule using compositions including the polymeric tandem dyes. Kits and systems for practicing the subject methods are also provided.
US10703857B2
Nanoparticle compositions comprising nanoparticles formed from π-conjugated cross-linked polymers are disclosed, together with their methods of manufacture and their applications. Owing to the nature of the cross-links formed therein, the nanoparticle compositions afford a high degree of manufacturing flexibility and control, as well as being amenable to facile purification for the purpose of imaging and electronics applications.
US10703854B2
An epoxy composition may comprise a resin composition comprising a diglycidyl ether of bisphenol AF and at least one of a filler, a fire resistant component, a chain extender, a conductivity modifier, and a dye. The resin composition may further comprise at least one diglycidyl ether of bisphenol A and bisphenol F.
US10703847B2
A polyether having a functional group that is reactive to isocyanate with at least one polyisocyanate, which has an average isocyanate functionality in the range of 2.4 to 3.5, and at least one vinyl compound, which has a functional group that is reactive to isocyanate, wherein the molar ratio of polyether to vinyl compound lies in the range of 3:1 to 1:3 and the ratio of the sum of the molar quantities of polyether and vinyl compounds to isocyanate groups lies in the range of 1.5:1 to U.5. Corresponding vinylterminated prepolymers have the advantage of low visocity together with good water solubility and therefore can be used advantageously for applications as injection agents.
US10703843B2
The present application provides compositions and methods for allowing surfaces such as HDPE, LDPE, polyethylene, polypropylene, Teflon (polytetrafluoroethylene), SBS, SEBS, SIS elastomers, and silicone rubber, which are notoriously difficult to apply adhesives, glues, or coatings to, to be treated with a Primer System comprising a cyanoacrylate monomer and non-polar solvent component and an initiator component, wherein the polymerization product of the components is a microstructured polycyanoacrylate layer. The microstructured polycyanoacrylate layer-increases the ability of a glue, adhesive, or coating to adhere to that surface and subsequently allows other materials to be used as coatings on the surface or to be applied using a glue or adhesive.
US10703836B2
Disclosed is a simplified process for formation of polyisobutylene functionalized with at least one terminal primary or secondary alcohol. The process comprises subjecting an olefin functional polyisobutylene, butyl rubber, or mixtures thereof to ozonation and reduction thereby forming mono-alcohol and diol functional polyisobutylene. The formed functional polyisobutylenes can serve as precursors for many other functionalized polyisobutylenes including urethane polyisobutylenes, urethane polyisobutylenes capped with (meth)acrylate functions, and (meth)acrylate capped polyisobutylenes.
US10703827B2
The present invention relates to a modified conjugated diene-based polymer, and more particularly, provides a modified conjugated diene-based polymer including a functional group derived from a modifier including a compound represented by Formula 1, and a method for preparing the same.
US10703823B2
The present invention relates to chimeric chemical compounds which are used to recruit antibodies to cancer cells, in particular, prostate cancer cells or metastasized prostate cancer cells. The compounds according to the present invention comprise an antibody binding terminus (ABT) moiety covalently bonded to a cell binding terminus (CBT) through a linker and optionally, a connector molecule.
US10703816B2
The invention provides a chimeric antigen receptor (CAR) comprising an antigen binding domain comprising SEQ ID NOs: 1-6, a transmembrane domain, and an intracellular T cell signaling domain. Nucleic acids, recombinant expression vectors, host cells, populations of cells, antibodies, or antigen binding portions thereof, and pharmaceutical compositions relating to the CARs are disclosed. Methods of detecting the presence of cancer in a mammal and methods of treating or preventing cancer in a mammal are also disclosed.
US10703813B2
The present disclosure relates to novel anti IL-34 antibodies or antigen-binding fragments thereof specifically binding cytokine IL-34 with high affinity, the method of obtaining of these antibodies and their therapeutic use.
US10703806B2
The present specification discloses SNAP-25 compositions, methods of making α-SNAP-25 antibodies that bind an epitope comprising a carboxyl-terminus at the P1 residue from the BoNT/A cleavage site scissile bond from a SNAP-25 cleavage product, α-SNAP-25 antibodies that bind an epitope comprising a carboxyl-terminus at the P1 residue from the BoNT/A cleavage site scissile bond from a SNAP-25 cleavage product, methods of detecting BoNT/A activity, and methods of detecting neutralizing α-BoNT/A antibodies.
US10703800B2
Provided herein, inter alia, are compositions and methods for culturing mammalian cells. In certain aspects, the composition is a medium containing one or more of a lithium ion source, one or more fatty acids, and/or ethanol. Use of any of the cell culture media described herein to culture cells that have been genetically engineered to produce one or more recombinant polypeptides (for example, antibodies) can result in increased titers, a more favorable glycosylation profile, and/or modulated (e.g. decreased) amounts of high and low molecular weight species, and/or modulated (e.g. decreased) amounts of acidic or basic charge variants, compared to cells cultured in a medium that does not contain one or more of a lithium ion source, one or more fatty acids, and/or ethanol.
US10703798B2
Fusion polypeptides have an FGFR2 polypeptide and cDNAs encode such fusion polypeptides. Methods of diagnosing the presence of the fusion polypeptides or of a gene or RNA sequence coding therefore in a sample from a subject as well as methods of treatment of a tumor instructed by the latter diagnosis.
US10703797B2
The disclosure relates to optimized polynucleotide sequences for LAMP-2B, expression cassettes, vectors, and methods of use thereof in treating disease, e.g. Danon disease.
US10703795B2
The present invention relates to peptides, proteins, nucleic acids and cells for use in immunotherapeutic methods. In particular, the present invention relates to the immunotherapy of cancer. The present invention furthermore relates to tumor-associated T-cell peptide epitopes, alone or in combination with other tumor-associated peptides that can for example serve as active pharmaceutical ingredients of vaccine compositions that stimulate anti-tumor immune responses, or to stimulate T cells ex vivo and transfer into patients. Peptides bound to molecules of the major histocompatibility complex (MHC), or peptides as such, can also be targets of antibodies, soluble T-cell receptors, and other binding molecules.
US10703785B2
The invention provides structurally-constrained peptides by hydrocarbon stapling of a BCL9 HD2 helix for use as a therapeutic agent. The invention further provides methods and kits for use of the structurally-constrained peptide of the instant invention. The invention is based, at least in part, on the results provided herein demonstrating that hydrocarbon stapled helical peptides display excellent proteolytic, acid, and thermal stability, restore the native helical structure of the peptide, possess superior pharmacokinetic properties compared to the corresponding unmodified peptides, and are highly effective in binding to β-catenin in vitro, in cellulo, and in vivo, disrupting the BCL-9/β-catenin interaction, and thereby interfering with deregulated Wnt/β-catenin signaling for therapeutic benefit in a variety of human diseases including human cancer.
US10703778B2
Provided is a cyclic peptide, which is represented by Formula (I) or Formula (I′) and has excellent antibody binding properties and improved chemical resistance, an affinity chromatography support, a labeled antibody, an antibody drug conjugate, and a pharmaceutical preparation. RN-Xg-[Xi-Xa-Xm-X1-X2-X3-Xn-Xb-Xj]k-Xh-RC (I) In Formula (I), Xa and Xb each independently represent an amino acid residue derived from an amino acid, other than L-cysteine and D-cysteine, having a thiol group on a side chain and are bonded to each other through a disulfide bond, or, one of Xa and Xb represents an amino acid residue derived from an amino acid, other than L-cysteine and D-cysteine, having a thiol group on a side chain and the other represents an amino acid residue derived from an amino acid having a haloacetyl group on a side chain, and Xa and Xb are bonded to each other through a thioether bond. RN-Xg-[Xi-Xa-Xm-X1-X2-X3-Xn-Xb-Xj]k-Xh-RC (I′) In Formula (I′), one of Xa and Xb represents an amino acid residue derived from L-cysteine or D-cysteine and the other represents an amino acid residue derived from an amino acid having a haloacetyl group on a side chain, and Xa and Xb are bonded to each other through a thioether bond, or, one of Xa and Xb represents an amino acid residue derived from L-penicillamine or D-penicillamine and the other represents an amino acid residue derived from an amino acid having a haloacetyl group on a side chain, and Xa and Xb are bonded to each other through a thioether bond.
US10703765B2
The present invention relates to compounds of general formula (I) having dual pharmacological activity towards both the sigma (σ) receptor, and the μ-opiod receptor and more particularly to diazaspiro undecane compounds having this pharmacological activity, to processes of preparation of such compounds, to pharmaceutical compositions comprising them, and to their use in therapy, in particular for the treatment of pain.
US10703755B2
The present invention relates to a substituted purine derivative of formula (1) wherein R1 is alkoxy or the like, R2 is alkyl or the like, Ring Q1 is aryl or the like, W1 is alkylene or the like, Ring Q2 is aromatic carbocyclyl or the like, n is 1-4, R3 is hydrogen atom or the like, X1 is single bond or the like, W2 is alkylene or the like, and R4 is hydrogen atom or the like, or a pharmaceutically acceptable salt thereof, which has a potent inhibitory effect against TLR7, and thereby is useful for treating autoimmune disease.
US10703754B2
Compounds and compositions for treating injuries caused by exposure to chemical warfare agents are described herein.
US10703753B2
Provided herein are ergoline compounds and pharmaceutical compositions thereof. In some embodiments, provided herein are methods of treatment, prevention, or amelioration of a variety of medical disorders such as, for example, migraine using the compounds and pharmaceutical compositions disclosed herein. In still other embodiments, provided herein are methods of agonizing receptors such as, for example, the 5-HT1A, 5-HT1B and 5-HT1D receptors without agonizing the 5-HT2B receptor using the compounds and pharmaceutical compositions disclosed herein. In still other embodiments, provided herein are methods of antagonizing the 5-HT2B adrenergic alpha2A and/or the alpha2B receptors using the compounds and pharmaceutical compositions disclosed herein. In still other embodiments, provided herein are methods of antagonizing the D2 and D3 receptor using the compounds and pharmaceutical compositions disclosed herein.
US10703749B2
The present invention is directed to compounds of Formulas (I, IIa and IIb): The invention also relates to pharmaceutical compositions comprising compounds of Formulas (I, IIa and IIb). Methods of making and using the compounds of Formulas (I, IIa and IIb) are also within the scope of the invention.
US10703739B2
Described herein are amorphous and crystalline forms of pharmaceutically acceptable salts of the lysine specific demethylase-1 inhibitor 4-[2-(4-aminopiperidin-1-yl)-5-(3-fluoro-4-methoxy-phenyl)-1-methyl-6-oxo-1,6-dihydropyrimidin-4-yl]-2-fluorobenzonitrile. Also described are pharmaceutical compositions suitable for administration to a mammal that include the lysine specific demethylase-1 inhibitor, and methods of using the lysine specific demethylase-1 inhibitor for treating diseases or conditions that are associated with lysine specific demethylase-1 activity.
US10703731B2
The present invention relates to a process for the preparation of Trisodium (4-{[(1S.3R)-1-([1,1′-biphenyl]-4-yl-methyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxo butanoate)-(N-pentanoyl-N-{[2′-(1H-tetrazol-1-id-5-yl)[1,1′-biphenyl]-4-yl]methyl}-L-valinate) represented by the following structural formula-1:
US10703728B1
In certain aspects, the invention provides a novel crystalline form of olaparib (4-[(3-[(4-cyclopropylcarbonyl)piperazin-4-yl]carbonyl)-4-fluorophenyl]methyl(2H)phthalazin-1-one). In related aspects, the invention provides a processe for preparing the novel crystalline form of olaparib. The process includes forming a solution comprising crude olaparib and an organic solvent; adding the solution to an anti-solvent to form a slurry comprising a precipitate; isolating the precipitate; and drying the precipitate to obtain a crystalline form III of olaparib.
US10703716B2
Disclosed herein are antibacterial compounds, pharmaceutical compositions including the antibacterial compounds, and methods of treating bacterial infections using the compounds and compositions.
US10703713B2
The industrial scale preparation of isocyanates gives rise to distillation bottom streams that are in need of further workup. These distillation bottom streams still also contain, as well as a distillation residue consisting of compounds that can be evaporated without decomposition only with great difficulty if at all (also referred to as residue for short), proportions of the desired target product (i.e. isocyanate to be prepared). The present invention relates to a process that enables recovery, in an efficient manner, of this proportion of isocyanate to be prepared in a distillation bottom stream which is obtained in the workup of the crude liquid process product which contains the isocyanate to be prepared and is formed in an isocyanate preparation process. More particularly, the present invention relates to a drying step in which the isocyanate to be prepared is recovered to form a solid material that has been largely to completely freed of this isocyanate. This drying step is characterized by a minimum content of compounds containing carbodiimide groups of 15% by mass, preferably 20% by mass, more preferably 30% by mass, based on the total mass of the distillation residue fed to the drying apparatus used, where this minimum content can also be adjusted by an in situ carbodiimidization.
US10703712B2
Described herein are compounds that are farnesoid X receptor agonists, methods of making such compounds, pharmaceutical compositions and medicaments comprising such compounds, and methods of using such compounds in the treatment of conditions, diseases, or disorders associated with farnesoid X receptor activity.
US10703698B2
Provided are compounds of formulae provided herein. The compounds may include pathway-preferential estrogens (PaPEs) derivatives with tissue-selective activities. Also provided are pharmaceutical compositions comprising the compounds, as well as methods of treating a disease or condition including administering the compounds. The disease or condition may include postmenopausal symptoms, cardiovascular disease, stroke, vascular disease, bone disease, metabolic disease, arthritis, osteoporosis, obesity, vasomotor/hot flush, cognitive decline, cancer including breast cancer.
US10703689B2
A process for converting a feed stream to C2 to C5 hydrocarbons includes introducing a feed stream of hydrogen and at least one carbon-containing component selected from CO, CO2, and mixtures thereof into a reaction zone at an initial reactor pressure and an initial reactor temperature. The feed stream is contacted to a hybrid catalyst positioned in the reaction zone, and the hybrid catalyst includes a methanol synthesis component and a solid microporous acid material. The pressure within the reaction zone is increased during the contacting of the feed stream to the hybrid catalyst from the initial reactor pressure to a final reactor pressure. A temperature within the reaction zone at any time during the contacting of the feed stream to the hybrid catalyst is within ±20° C. of the initial reactor temperature.
US10703687B1
Stabilized, amorphous high energetic compositions having crystallization inhibiting polymers dispersed throughout the solid composition. The compositions disclosed herein are an improvement over crystalline high energetic compositions in that such disclosed compositions are stable and possess physical properties desirable in propellant and high explosive applications.
US10703685B2
The disclosed invention relates to soil and water treatment compounds, specifically to an acidifying composition used to treat soil or irrigation water used for growing plants. Disclosed is an acidifying composition that includes an organic acid. The acidifying composition is used to control and manage conditions in irrigation water and soil to prevent sodic deterioration of soil structure. Treatment of soil and/or irrigation water with the disclosed acidifying composition leads to improved soil quality and improved quality of plants grown in the soil treated with the acidifying composition.
US10703677B2
Provided is a SiC sintered body which contains nitrogen atoms, wherein a ratio Rmax/Rave of a maximum volume resistivity Rmax of the sintered body to an average volume resistivity Rave of the sintered body is 1.5 or lower; a ratio Rmin/Rave of a minimum volume resistivity Rmin of the sintered body to the average volume resistivity Rave is 0.7 or higher; and a relative density of the sintered body is 98% or higher.
US10703676B2
A method may comprise: mixing a water having hardness at about 300 ppm or greater with a plurality of particulates, a swellable clay, a chelating agent at about 0.01% to about 5% by weight of the water (BWOW), and an alkali metal base at about 0.01% to about 5% BWOW to produce a treatment fluid; and introducing the treatment fluid into a wellbore penetrating a subterranean formation.
US10703671B2
Photosensitive lithium zinc aluminosilicate glasses that can be selectively irradiated and cerammed to provide patterned regions of glass and lithium-based glass ceramic, and composite glass articles made from such glasses and glass ceramics are provided. Compressive and tensile stress at the interface of the lithium-based glass-ceramic and lithium zinc aluminosilicate glass may be used to frustrate crack propagation in such a composite glass/glass ceramic article. Methods of making composite glass articles comprising such lithium-based glass ceramics and lithium zinc aluminosilicate glasses are also provided.
US10703670B2
The invention relates to a process for producing alkali metal-rich aluminosilicate glasses having a content (in mol % based on oxide) of alkali metal oxides of 4-16 mol %, of Al2O3 of at least 4 mol % and of B2O3 of 0-4 mol %, wherein 0.15 mol % to 0.9 mol % of chloride(s) and at least one refining agent from the group of sulfate(s) (reported as SO3), CeO2 are added to the glass batch and wherein the sum total of refining agents added in the batch is 0.17 mol % to 1.3 mol %.
US10703668B2
Fibrous material webs and methods of making the fibrous material webs. Binderless webs can be formed in a continuous process where fiber material, such as glass is melted and formed into fibers. The fibers are formed into a web of binderless glass fibers or a web with a dry binder. The binderless web or the web with dry binder can be layered and/or the fibers that make up the web can be mechanically entangled, for example, by needling.
US10703654B2
A plasma gate device comprises a plasma creation chamber, first through fourth dielectrics, and first through sixth electrodes. The plasma creation chamber is a space in which plasma is created from a first fluid and a second fluid. The first and second dielectrics form upper and lower boundaries on a first side of the plasma creation chamber. The third and fourth dielectrics form upper and lower boundaries on a second side of the plasma creation chamber. The first and second electrodes receive voltages to generate a first electric field which creates a first plasma on the first side of the plasma creation chamber. The third and fourth electrodes receive voltages to generate a second electric field which creates a second plasma on the second side of the plasma creation chamber. The fifth electrode extracts electrons from the first plasma. The sixth electrode injects electrons into the second plasma.
US10703649B2
The present invention provides an improved catalytic fast pyrolysis process for increased yield of useful and desirable products. In particular, the process comprises an improved catalytic fast pyrolysis process for producing aromatic compounds, such as, for example, benzene, toluene and xylenes, from biomass feedstock containing impurities, such as, for example alkali and alkaline earth metal, sulfur and nitrogen components.
US10703630B2
Process for preparing chlorine by oxidation of hydrogen chloride by means of oxygen in the presence of a particulate catalyst in a fluidized-bed reactor, where the heat of reaction of the exothermic oxidation of hydrogen chloride is removed by means of water which circulates in the tubes of a shell-and-tube heat exchanger, where (i) the fluidized-bed reactor is heated up to an operating temperature in the range from 350 to 420° C. in a heating-up phase and (ii) hydrogen chloride is reacted with oxygen in an operating phase at the operating temperature, wherein (i-1) the fluidized-bed reactor is heated up to a temperature below the operating temperature in a first heating-up phase and (i-2) hydrogen chloride and oxygen are fed into the fluidized-bed reactor and reacted in a second heating-up phase in which the fluidized-bed reactor is heated up to the operating temperature by the heat of reaction of the exothermic oxidation of hydrogen chloride.
US10703628B2
A solar thermal fuel can include a plurality of photoswitchable moieties associated with a nanomaterial. The plurality of photoswitchable moieties can be densely arranged on the nanomaterial, such that adjacent photoswitchable moieties interact with one another. The solar thermal fuel can provide high volumetric energy density.
US10703627B2
Methods of forming semiconductor structures comprising one or more cavities, which may be used in the formation of microelectromechanical system (MEMS) transducers, involve forming one or more cavities in a first substrate, providing a sacrificial material within the one or more cavities, bonding a second substrate over a surface of the first substrate, forming one or more apertures through a portion of the first substrate to the sacrificial material, and removing the sacrificial material from within the one or more cavities. Structures and devices are fabricated using such methods.
US10703621B1
The fuel pump holding strap is a mechanical device. The fuel pump holding strap is configured for use with a vehicle. The vehicle further comprises a metal mesh screen flooring. The metal mesh screen flooring forms a platform commonly used by the operator of a vehicle for entering and exiting the vehicle. The fuel pump holding strap is configured for use with a fuel pump nozzle. The fuel pump nozzle is a nozzle configured for use in dispensing fuel into the vehicle. The fuel pump holding strap comprises a pipe clamp and a plurality of fastening structures. The pipe clamp attaches the plurality of fastening structures to the fuel pump nozzle. The plurality of fastening structures secures the fuel pump nozzle to the metal mesh screen flooring such that the fuel pump nozzle does dislodge during the fuel transfer process.
US10703618B2
Technologies are described herein for a dispensing nozzle for a beverage dispensing system. An example embodiment of the dispensing nozzle may include a housing; a nozzle manifold containing orifices and corresponding conduits for a number of diluents, macro-ingredient sweeteners, and micro-ingredients; a sweetener channel and a diluent baffle, the combination of which facilitates the mixing of the diluent and macro-ingredient sweetener; a funnel; and a nozzle exit. The diluent, macro-ingredient sweetener, and micro-ingredients may mix in the dispensing nozzle to form a predetermined beverage. The dispensing nozzle may communicate with various aspects of the beverage dispensing system to coordinate the dispensing of the predetermined beverage.
US10703611B2
A shackle assembly used for lifting an object includes clevis members that each mount to a pin, and are moveable about the pin and into orientations for attachment to the object. Each clevis member includes a main body with an opening that receives the pin. A set of spaced apart and parallel legs project from the main body in a direction away from the pin. Spherical bearings are set between the pin and each main body that enable each clevis member to move with multiple degrees of freedom about the pin. Fasteners project between the free ends of each set of legs, and which are for engaging the object.
US10703607B2
A method for operating an elevator system with a car that moves in an elevator shaft may involve detecting an operating parameter related to a change in loading of the car, ascertaining whether a position of the car relative to a stopping floor needs to be adjusted based on the operating parameter, determining times at which the car is to be stopped and at which the adjustment is to be performed, stopping the car and blocking a flow of energy of a drive of the car and/or activating a service brake as the car is being stopped and/or while the car is stopped, and adjusting the position of the car if necessary. Further, whether the adjustment is necessary may be ascertained before the car is stopped.
US10703606B2
A data communication arrangement for elevators is disclosed. In the arrangement a directional antenna is used for transmitting data from elevator car. Correspondingly, the counterpart antenna in the end of the elevator shaft is transmitting with a directional antenna. In the elevator a further omnidirectional antenna is used to communicate with the terminal devices belonging to passengers. The properties of antennas may be adjusted based on the speed and location of the elevator car. In addition to the properties of antennas also other transmission characteristics may be adjusted based on the same information.
US10703601B2
Transformable cable reels, related assemblies and methods are disclosed. The transformable cable reels may be provided in a first reel configuration for spooling on cable to the transformable cable reel and to pay out the spooled cable from the transformable cable reel. Cable spooled on the transformable cable reel may be payed out during cable installations. The transformable cable reel may also be configured in a second reel configuration for storage of any excess cable after cable payout. As one non-limiting example, the volume of the cable reel may be less in the second reel configuration than in the first reel configuration so that less volume is required to store the transformable cable reel. Providing the transformable cable reel in the second reel configuration may make it more feasible to store the transformable cable reel in fiber optic equipment, and/or avoid storing excess cable removed from a cable reel.
US10703599B2
An image forming apparatus includes a stacking unit for stacking types of envelopes, an image forming unit that forms an image on a conveyed envelope, a rear-end regulating plate, provided on the stacking unit, that regulates a trailing end of the stacked envelope at an upstream side of a conveyance direction, side regulating plates, provided on the stacking unit, that regulate both side ends of the stacked envelope in a perpendicular direction to the conveyance direction, an attachment, removably mounted on the stacking unit, that regulates a trailing end of the stacked envelope, an operation unit that accepts a type of envelope via an instruction by a user, and a controller that determines, based on the type of the accepted envelope, whether the attachment is necessary, and, if it is determined that the attachment is necessary, displays information, on the operation unit, prompting the user to mount the attachment.
US10703597B2
A recording device includes: a transport unit configured to transport a medium in a plurality of transport speed modes; a driving unit configured to drive the transport unit with a plurality of speed profiles, each corresponding to one of the plurality of transport speed modes; a current sensor configured to measure a reference current the driving unit, the reference current being a current flowing in the driving unit when the medium is transported in a loosened state; and a control configured to acquire a plurality of current profiles, each corresponding to one of the speed profiles, based on the reference current. The control unit is configured to acquire a first current profile based on the reference current when the medium is transported in a first transport speed mode, and to generate a second current profile based on the first current profile.
US10703585B2
An automated palletizer includes an automated package pick device capable of moving packages from a package deposit section to a pallet to form a pallet load from packages, a controller that is operably connected to the automated pick device, the controller having a pallet load generator configured to determine a pallet load structure of mixed packages, the pallet load generator being programmed so that it determines the load structure from mixed package layers overlaid over each other at least one of the mixed package layers being formed of stacks of mixed packages, top and bottom surfaces of the stacks corresponding to the at least one mixed package layer respectively forming top and bottom surfaces of the at least one mixed package layer that are substantially flat. The controller generates commands for the pick device to build the pallet load from the load structure determined by the pallet load generator.
US10703584B2
A method for operating a robotic system includes obtaining and processing first data representative of an object at a start location; obtaining additional data as the object is transferred to a task location, wherein the additional data includes information regarding one or more edges and/or one or more surfaces separate from portions of the object captured in the first data; and creating registration data representative of the object based on the additional data.
US10703579B2
The invention relates to a tipping actuator for a conveyor system that comprises a plurality of article carriers moving on an endless conveyor in a conveying direction, each article carrier having a carrier frame for bearing an article, the carrier frame being pivotally mounted on the article carrier and operable to tip to enable discharge of the article borne on the carrier frame. The tipping actuator comprises a trigger member for contacting the article carriers to tip them and is configured such that, when in a non-contact position, the article carriers are able to at least partly tip towards the trigger member such that the contact portion of the trigger member is received by a portion of the article carrier. In another embodiment, a contact portion of the trigger is sloped with two different gradients. An electromagnet may be used to cause actuation of the trigger. The tipping actuator may be able to allow tipping in opposite directions of adjacent carriers, for example in some embodiments the trigger may be formed of upstream and downstream parts.
US10703574B2
A conveying device includes first guide rails 2A, 2B; second guide rails 12A, 12B for being connected to the first guide rails 2A, 2B; a movable holding part that holds the second guide rails 12A, 12B such that the second guide rails 12A, 12B are movable in transverse directions with respect to longitudinal directions of the second guide rails 12A, 12B; and moving parts 3A, 3B that move by being guided by the corresponding first guide rails 2A, 2B and the corresponding second guide rails 12A, 12B.
US10703562B2
Storage and retrieval unit that includes a rail arrangement having a track and a flange arrangement. In a direction of gravity, the track is located below the flange arrangement. The storage and retrieval unit further includes a moving gear comprising a track roller arrangement and an array of underfriction wheels. The track roller arrangement is configured to support the moving gear on the track, and the array of underfriction wheels is arranged to engage under the flange arrangement.
US10703550B2
The invention is a dispensing system (1; 101) suited to dispense a product (W), comprising a flexible container (2) defining a volume (Y) for containing the product (W), the flexible container (2; 102) being of the type comprising at least one dispensing opening (6; 106) and at least one collapsible and/or deformable portion suited to reduce the volume (V) in such a way as to cause the product (W) to be dispensed through the dispensing opening (6; 106). Said system comprises covering means (3; 103) externally associated with the flexible container (2; 102), the covering means (3; 103) comprising at least one shaped opening (21a, 21b; 22a, 22b; 121a) suited to make the flexible container (2; 102) visible and suited to provide the dispensing system (1; 101) with a decorative element as desired. The invention concerns also covering means (3; 103) suited to be externally associated with a flexible container (2; 102) that defines a volume (V) for containing a product (W).
US10703549B2
A water soluble container comprises a water soluble shell enclosing a volume. The water soluble shell comprises a set of voxels.
US10703548B2
A low profile component tie includes a strap having a top and a bottom. The strap is configured to wrap around a component with the bottom facing the component. The strap has sides between the top and the bottom. The strap has teeth disposed along at least one of the sides. The strap extends between a root end and a distal end. A head is provided at the root end of the strap. The head has a channel configured to receive the strap. The head has at least one pawl provided in the channel. The pawl engages at least one of the teeth along the side of the strap to secure the strap in the head.
US10703546B2
A cap protector for protecting a cap on a container includes a plurality of axial fins extending from a common point. Each axial fin includes a body extending between an inner edge and an outer edge, and a cap-engaging lip defined on the inner edge that is configured to selectively engage a cap of a container. The plurality of axial fins may be movable from a disengaged position to an engaged position, wherein in the engaged position the cap-engaging lip of each of the plurality of axial fins engages the cap of a container.
US10703544B2
A lid for a drinking vessel is described. In one embodiment, the lid is an insulated lid configured to engage an opening of a container, where the lid is configured to at least partially retain the liquid within the container. The lid may further include a first opening for exposing the contents of the container to the atmosphere and for drinking from the container if desired. Additionally, the first opening may include an insert designed to reduce the heat transfer between the interior and exterior of the container, while in other embodiments aiding in the equalization of pressure between the interior and exterior of the container. Other aspects and embodiments of the present invention will be apparent from the following detailed description, drawings, and claims.
US10703543B1
A collapsible fuel container that is configured to be transitioned intermediate a first position and a second position wherein its first position the collapsible fuel container is rolled for storage. The fuel container includes a body having a wall defining an interior volume. The body is manufactured from a flexible material and has opposing ends. A rotatable fill nozzle is operably coupled with a dip tube wherein the rotation thereof permits the flow of fluid or inhibits the flow of fluid. A dip tube is fluidly coupled to the fill nozzle and is disposed within the interior volume of the body. A first block member is on an end of the fill nozzle and a second block member is on an end of the dip tube. The rotatable movement of the fill nozzle transitions the orientation of the first block member to the second block member.
US10703535B2
A packaging element for accommodating at least one product. The packaging element may include a blank which has the following portions connected to one another by folding lines: an accommodating portion having at least one receptacle, the shape of which is matched to the shape of a product to be accommodated; a first side-wall portion; a first cover-wall portion; a second side-wall portion; and a second cover-wall portion. The first cover-wall portion may have at least one hollow, and the second cover-wall portion may have at least one protrusion with a shape and position complementary to the hollow.
US10703531B2
A collapsible crate includes a base and a plurality of walls pivotably connected to the base. Each of the walls is a single piece of molded plastic defining a plurality of planks having the appearance of wooden planks, such as with molded-in grain texture, knots and irregular edges. The irregular edges may provide gaps between adjacent planks to provide ventilation to the crate. The knots may include knot holes to provide additional ventilation. The planks may include horizontal planks extending between vertical planks. The vertical planks and horizontal planks may include an interior wall from the edges of which extend ribs toward the exterior of the crate.
US10703524B2
The present disclosure provides a glue supply device for a labeling unit with a glue printer, comprising: a storage tank for glue, a supply line for supplying glue from the storage tank to the glue printer, a continuously delivering glue pump which is embodied to deliver glue from the storage tank into the supply line, and a hydropneumatic reservoir for the glue, wherein the hydro-pneumatic reservoir is arranged at the supply line upstream of the glue printer.
US10703523B2
An improved container transportation and filling system and method is provided. The system can deliver cartridges and other containers, such as tubes, in a horizontal orientation. The containers can have a closed bottom end and an open top end. A screw conveyor(s) is used to engage the containers and urge them forward and into rotation around the axis of the screw conveyor, from horizontal to vertical. A guide engages an end of the containers. The guide acts as a camming surface and guides the end of the container downward as it is advanced by the screw conveyor, to orient the container vertically for filling, capping and sealing. A second mirror image downstream screw conveyor and guide can reorient the container from vertical to horizontal.
US10703522B2
An apparatus and method for forming and filling spout film bags which are transferred by a transfer wheel including blowing nozzles, to a filler arranged downstream of the transfer wheel. A blowing nozzle can be placed on the spout upper edge of the spout of a spout film bag and then a defined pressure pulse can be introduced into the interior of the spout film bag through the spout by the blowing nozzle to form the spout film bag. The apparatus can include a transfer wheel having a plurality of receiving stations and blowing nozzles assigned to the receiving stations, the blowing nozzles being able to be placed on the spout upper edges of the spouts in order to introduce a defined pressure pulse, and a filler, arranged downstream of the transfer wheel, for filling the formed spout film bags.
US10703515B2
A mold configuration for forming a pocket in a film comprising: a film support surface; a perimeter edge at said film support surface; wall surfaces inward of the perimeter edge defining a mold cavity; the wall surfaces including transition wall surfaces extending to a bottom wall surface; and a plateau surface inward of the perimeter edge. In one form, the perimeter edge includes sharp corner profile perimeter edge portions defining at least one sharp corner profile. A method of forming a pouch, includes using the disclosed mold configuration. A resultant pouch has a perimeter seal seam having at least one sharp corner profile.
US10703510B2
A system and method of cleaning an aircraft APU entails positioning an elevated platform beneath the APU compartment, suspending a curtain from the doors of the APU compartment, positioning a basin beneath the curtain, attaching the curtain to the basin and pressure washing the APU or a portion thereof with steam and/or hot water. Runoff collected in the basin is transferred to a storage container for industrial wastewater treatment.
US10703509B2
A bond fixture including a plurality of supports mounted about a surface. At least one of the plurality of supports includes a vertical member and a hand crank operable to adjust a position of the vertical member. A first fixture is disposed at an end of the bond fixture and is movable relative to the surface. The first fixture includes a base and a support extending from the base. A second fixture includes a first member and a second member movably coupled. A fastener extending between the first member and the second member controls relative movement of the first member and the second member to define an opening there between. Each of the first member and the second member includes a plate having a heater formed therein.
US10703507B2
A retractable docking platform and parcel receptacle apparatus for delivery drones, including one or more telescopic sliding platform panels; adapted to slide between an extended position and a retracted position wherein in operation, a parcel can be delivered by a drone to the extended platform and on completion of delivery, the platform and parcel are retracted into the building for collection from a secure receptacle. The operation can be coordinated through a wireless system via remote signals sent by the drone and/or a drone operation center which also records addresser and addressee details and information including time of delivery, mass and scanned information to verify delivery. The platform can also communicate with the drone to verify its identity for secure delivery. The platform may send delivery confirmation to the customer receiving a parcel.
US10703504B2
A wireless engine monitoring system for an aircraft engine includes a housing and wireless transceiver that receives engine data, including engine data relating to environmental engine emissions. A processor processes the engine data and generates an alarm report when the environmental engine emissions exceed a threshold.
US10703500B2
A pipe assembly includes a first wall having an inner surface defining a fuel flowpath, a second wall spaced radially outward of the first wall, a gap formed between the first wall and the second wall defining a flow passage, and a screen positioned within the fuel flowpath being shaped and configured to direct ice in the fuel flowpath toward the inner surface such that heat from the first wall melts the ice.
US10703494B2
Disclosed is a technique for landing a drone using a parachute. The technique includes a parachute deployment system (PDS) that can deploy a parachute installed in a drone and land the drone safely. The parachute may be deployed automatically, e.g., in response to a variety of failures such as a free fall, or manually from a base unit operated by a remote user. For example, the PDS can determine the failure of the drone based on data obtained from an accelerometer, a gyroscope, a magnetometer and a barometer of the drone and automatically deploy the parachute if any failure is determined. In another example, the remote user can “kill” the drone, that is, cut off the power supply to the drone and deploy the parachute by activating an onboard “kill” switch from the base unit.
US10703482B1
A portable electronic device holder, separate from an aircraft tray table, has a spring biased lower retention portion with lower retention plates for securing a lower edge of a portable electronic device. The lower retention plate acts in concert with either one or more ridges molded into or affixed to a recess in a seat back panel, or with a spring biased, extendable upper retention portion with an upper retention plate to hold the portable electronic device in place.
US10703457B2
An aircraft (1) including a wing (5), the wing having an inner region (5a) and an outer region (5b), the inner and outer regions (5a, 5b) being connected by a hinge (11) defining a hinge line about which the outer region (5b) is foldable to reduce the span of the wing. The aircraft (1) includes an actuator (13) arranged to actuate the folding of the outer region (5b) of the wing with an actuation force. The wing (5) is braced by an external strut structure (9) for transferring some of the wing loadings in the outer region (5b) of the wing away from the inner region of the wing (5a). The actuator (13) is arranged to exert the actuation force via the strut structure (9).
US10703447B2
A fuel tender for providing fuel to an internal combustion engine of a marine vessel may include a first pontoon, a second pontoon, and a truss structure connecting the first pontoon to the second pontoon with the first pontoon being separated from the second pontoon by a pontoon separation distance that is greater than a vessel width of the marine vessel so that the first pontoon and the second pontoon can straddle a vessel stern of the marine vessel with the truss structure disposed above a stern deck of the marine vessel. A fuel reservoir may be mounted on the truss structure and have a fuel supply line extending therefrom, with the fuel supply line being fluidly connectable to a fuel inlet port for the internal combustion engine when the first pontoon and the second pontoon straddle the vessel stern of the marine vessel.
US10703428B2
A top case arrangement for a vehicle, in particular a motorcycle or a motor-cycle like vehicle, and a vehicle having such a top case, are provided. The top case arrangement includes a top-case, and a base support arranged below the top case. The base support connects to the vehicle structure and includes connecting sections for selectively connecting armrests to the base support. The top case includes in the region of the lower side, at least one cavity in which both connecting sections are arranged when the top case is in an installed position on the vehicle.
US10703419B2
Apparatus and methods for joining panels are presented. Panels may be commercial off the shelf (COTS) panels and/or additively manufactured panels; and panels can be joined using an additively manufactured interconnect unit. Notches and protrusions can be formed in the panels and in the interconnect unit to facilitate the connection of the panels with the interconnect unit. In another approach a ribbed triangular prism can be manufactured using three dimensional (3D) printing. The panels can then be joined by inserting the ribbed triangular prism between the panels and by using an adhesive for bonding.
US10703415B2
A frame assembly includes a rail including a straight portion, the straight portion including a first portion, a second portion, and a deformation trigger between the first and second portions, and a bracket attached to the first portion and the second portion.
US10703413B2
An RDU detachment system is provided and includes a front RDU mounting bracket, a rear RDU mounting bracket, a rear cross member including an inclined face oriented toward the RDU and at least one bushing connecting the rear RDU mounting bracket with the rear cross member. A method of detaching an RDU from a rear subframe of a motor vehicle in response to an impact force transmitted to the RDU through a driveline is also disclosed.
US10703405B2
A steering control device that can more appropriately transmit a road-surface reaction force to a steering wheel is provided. The steering control device feedback controls a steering angle to a target steering angle that is a target value of the steering angle. The steering control device includes an estimated axial force computation circuit that computes an estimated axial force so as to reflect a road-surface reaction force in a reaction force generated by a reaction force actuator. The estimated axial force computation circuit computes the estimated axial force by causing a friction compensation amount computation circuit and an efficiency compensation gain computation circuit to compensate an initial estimated axial force computed by an initial estimated axial force computation circuit.
US10703404B2
In an electric power steering device, if a semiconductor switching element is used between a battery and a bridge circuit for opening and closing a current path, this arises a problem of generation of heat by an ON resistance; for this reason, a current flowing through the semiconductor switching element is limited if a difference between the gate voltage and the source voltage of the semiconductor switching element is smaller than or equal to a predetermined value.
US10703402B2
A steering support structure includes: an instrument panel reinforcement extending in a vehicle width direction; and a steering support bracket attached to the instrument panel reinforcement and supports a steering column. The steering support bracket includes an upper bracket joined to an upper side of the instrument panel reinforcement in a vehicle up-down direction, and a lower bracket joined to a lower side of the instrument panel reinforcement in the vehicle up-down direction and fastened and fixed to the upper bracket.
US10703395B2
The invention relates to a device and a method for monitoring an electric network in a rail vehicle. The electric network includes at least one power converter, at least one permanent magnet machine, and at least one first phase line for the electrical connection of the at least one power converter and the at least one permanent magnet machine. The first phase line is interrupted. A potential difference is determined between a machine-side part of the first phase line and a reference potential and a potential-difference-dependent variable, wherein a speed of the permanent magnet machine and, as a function of the speed, a speed-dependent reference variable are determined. A deviation of the potential-difference-dependent variable from the speed-dependent reference variable is determined, wherein a network fault is detected if the deviation is greater than a predetermined threshold value.
US10703391B2
A cabin for a vehicle includes a cabin wall having an opening and a door for opening and closing the opening. The door is moved about a rotational point and includes a movable door leaf which has a concentric segment. The cabin wall additionally forms a door stop in the closing direction of the door. The door leaf further has a linear segment with a fixed end and a free end. The linear segment adjoins the concentric segment at the fixed end in the closing direction of the door, and the free end of the linear segment forms a closing edge in the closing direction of the door. The closing edge lies against the door stop when the door is closed. A vehicle including an interior having the cabin is also provided.
US10703386B2
Technologies are shown for intervehicle communication involving notification messages sent from one vehicle to another vehicle. Sensor event data from one vehicle can be sent in a wireless message to another vehicle and information from the wireless message displayed to a driver of the other vehicle providing the driver with information that may not be detectable by the sensors in the driver's vehicle. Inquiries or requests can also be sent from one vehicle to another vehicle. User interfaces can include graphical user interfaces, haptic devices and audio devices.
US10703374B2
The present invention relates to a vehicle driving assisting apparatus comprising: a first camera including a first lens having a first view angle, and acquiring a first image of the front of a vehicle; a second camera including a second lens having a second view angle different from the first view angle, and acquiring a second image of the front of the vehicle; and a processor for detecting an object based on each of the first image and the second image, acquiring stereo images by respectively processing the first image and the second image, and performing a disparity calculation for the front of the vehicle based on the stereo image.
US10703368B2
A hybrid vehicle without having a torque converter that can be launched rapidly and accelerated sharply in a WOT condition. The hybrid vehicle comprises a motor operated by an engine torque to generate electricity, and a clutch for selectively transmitting power between the first motor and drive wheels. The hybrid vehicle is launched by engaging the clutch to deliver the engine torque to the drive wheels. A torque absorbing control is executed to reduce the engine torque delivered to the clutch by operating the motor by the torque of the engine, when the clutch is disengaged and an accelerator pedal is depressed.
US10703360B2
A method is provided which comprises: acquiring, from a set of ranging sensors, recognition information about a plurality of parked vehicles existing in a parking frame group comprising a plurality of parking frames arranged side by side; selecting representative points of the parked vehicles from the recognition information; calculating a distance between representative points that is a distance between the representative points adjacent to each other; and calculating a width of the parking frames on the basis of the distance between representative points.
US10703356B2
An engine stop-start fuel saving system for a vocational vehicle propelled by a conventional internal combustion engine and powertrain. The system uses a low storage capacity, rapid recharge, high cycle life electric energy storage device, such as an ultracapacitor. The system also includes a generator that is coupled to the engine and that is connected to 5 recharge the electric energy storage device, as well as a motor that is powered by the energy storage device and that is coupled to the engine. The system also includes a controller that can activate the motor to restart the engine when it is stopped, and engage the generator to recharge the electric energy storage device, and that can subsequently stop the engine again when the electric energy storage device has reached a threshold 10 charge level. The electric energy storage device also powers at least one of: integral vehicle equipment; peripheral vehicle equipment; or an electrical outlet circuit with a socket for external plugin equipment.
US10703340B2
A system includes a processor and a memory. The memory stores instructions executable by the processor to detect an object exterior to a vehicle, and to actuate a fluid dispenser device based on an opacity of a window and a location of the detected object.
US10703335B2
A key unit authenticates a portable terminal based on information acquired from the portable terminal and controls locking and unlocking of a target by transmitting a signal to a locking and unlocking device. The key unit includes: a first communication unit configured to receive a request signal transmitted in a first frequency band from the locking and unlocking device; a controller configured to authenticate the portable terminal and process signals transmitted to and received from the locking and unlocking device; a second communication unit configured to perform short-range wireless communication with the portable terminal in a second frequency band; and a substrate on which the first communication unit, the controller, and the second communication unit are mounted. The first communication unit and the second communication unit are mounted at positions facing each other across the controller, on the substrate.
US10703332B2
A three-point seatbelt device includes: a webbing configured to function as a shoulder belt and a lap belt; a shoulder-side reeler that includes a pre-tensioner mechanism and a shoulder-side force limiter mechanism, and is configured to reel up an end portion of the webbing on a shoulder belt side so as to allow the webbing to be pulled out; a tongue mounted on the webbing; and an inner belt including a buckle to which the tongue is coupled, the inner belt including, of a pre-tensioner mechanism and a buckle-side force limiter mechanism, only the buckle-side force limiter mechanism. An initial load of the buckle-side force limiter mechanism is set to be larger than an initial load of the shoulder-side force limiter mechanism.
US10703331B2
A webbing guide for a vehicle seat includes a base defining a length between a first end and a second end and defining a plurality of pairs of corresponding spaced-apart post holes extending through the base between top and bottom surfaces thereof. The webbing guide further includes a guide body coupled with the base and defining a guide channel extending through the guide body in a direction generally normal to the length of the base and normal to the post holes.
US10703329B2
A seat assembly for a vehicle includes a seat, and a first seatbelt having a first end and a second end. The first end of the first seatbelt is coupled to the seat. The seat assembly includes a latch plate and a second seatbelt. The latch plate is fixed to the second end of the first seatbelt, and the second seatbelt is slideably coupled to the latch plate. The first seatbelt and the second seatbelt increase lateral support of the occupant during, e.g., a rollover event, oblique or side impacts.
US10703321B2
An airbag assembly includes a first airbag and a second airbag each inflatable to an inflated position, and a panel. In the inflated position, each of the first and second airbags have a bend, and first and second legs extending from the bend. The panel extends from the first airbag to the second airbag in the inflated position.
US10703320B2
A vehicle includes a roof and a first member supported by the roof. The first member is inflatable to an inflated position. The vehicle includes a second member supported by and in fluid communication with the first member and inflatable to an inflated position elongated along a vehicle-lateral axis and spaced from the roof. The vehicle includes an uninflatable panel extending from the roof and fixed to the second member in the inflated position.
US10703309B2
For connecting a diagnostic unit to a vehicle controller of a motor vehicle via a network connection, it is provided that, when the connection has been established between the diagnostic unit and the vehicle controller, a check is performed as to whether the diagnostic unit is directly connected to the vehicle controller. The diagnostic unit receives diagnostic data from the vehicle controller only when there is a direct connection.
US10703298B2
A display device includes an image generation device configured to allow a viewer to recognize the image, a control device configured to control the image generation device, a light projector configured to output the image as light, an optical mechanism capable of adjusting a distance from a predetermined position to a position at which the light is formed as a virtual image, a concave mirror configured to reflect light passing through the optical mechanism toward a reflector, a first actuator configured to adjust the distance in the optical mechanism, and a second actuator configured to adjust a reflection angle of the concave mirror. The control device estimates a temperature of the light projector, and in a case in which the estimated temperature is equal to or higher than a predetermined upper limit temperature, the control device causes the first actuator to reduce the distance.
US10703295B2
An apparatus for supporting a bicycle having wheels and a frame relative to a cargo bed of a pickup truck having a tailgate, spaced sidewalls and a front wall. The apparatus comprises holders for associating with the spaced sidewalls and adapted for engaging one of the wheels of the bicycle. The apparatus further includes a support for associating with the front wall to support the frame of the bicycle. The holders and support may be height-adjustable to accommodate a variety of bicycle shapes and sizes.
US10703293B2
A roof box for carrying cargo affixed to the roof rack rails of a vehicle is described. The attachment mechanism operates without the need to access the interior of the roof box itself and without disrupting the continuity of the floor board in the roof box. The user may deploy the engagement system from a single control point, and the individual attachment mechanisms include safety mechanisms to guard against an unexpected failure of other system components.
US10703288B2
A pickup truck includes a box side inner panel, a box side outer panel, a first compartment defined between the box side inner panel and the box side outer panel and a battery cooling pack held in the first compartment. A storage space customization feature may also be provided in the first compartment.
US10703259B1
An electronic controller of a vehicle is in electronic communication with lamp cover condition sensors, a headlamp switch, an off-road lamp switch and an electronic display. The electronic controller is configured to turn on the off-road lamp device in response to the off-road lamp switch being switched to the on condition and further in response to each of a plurality of predetermined conditions being met, the electronic controller further being configured to prevent the off-road lamp device from turning on in response to the off-road lamp switch being switched to the on condition and further in response to at least one of the plurality of predetermined conditions not being met, the predetermined conditions including at least a determination that the removable lamp cover of the off-road device has been removed, and a determination that the headlamp switch is in the second operating condition.
US10703258B2
The first transmission mechanism of the present invention includes a first permanent magnet, a first rocking member with a rod-like shape that includes one end at which the first permanent magnet is disposed and is extended in Z-axis direction, and two supporting bodies that rockably support the first rocking member at two different positions in Z-axis direction of the first rocking member. The first rocking member is rocked to move the first permanent magnet by an amount of displacement smaller than an amount of displacement inputted to the first supporting body, which is located on a side of the other end of the first rocking member in the two supporting bodies.
US10703253B2
A vehicle window for separating a vehicle interior from outer surroundings, includes glass pane with a light guide body made of glass on a region of the interior-side surface of the glass pane, wherein the surface of the light guide body facing the glass pane and the surface facing away from the glass pane enclose a wedge angle such that the thickness of the light guide body decreases in the direction from a lower edge to an upper edge of the glass pane, wherein the light guide body is secured to the interior-side surface of the glass pane by means of laser welding.
US10703250B2
A structure such as a toy hauler recreational vehicle includes a bed lift that moves a bed vertically between a lowered position, a raised position, and an upright position. The bed is oriented horizontally and positioned to receive one or more persons to sleep on it in the lowered position. The bed is oriented horizontally and stowed adjacent to a ceiling of the vehicle in the raised position. At least a portion of the bed is oriented vertically and stowed adjacent to a wall of the structure when the bed is in the upright position. The bed lift can include a mounting member that: (a) moves between a first position where the bed is oriented horizontally and a second position where the bed is oriented vertically and/or (b) is vertically offset to allow the bed to be lowered below or adjacent to the bottom of the bed lift.
US10703247B2
An apparatus is provided for conveniently and efficiently handling trash generated during operation of a motor vehicle. That apparatus includes a housing having a receiver, a trash receptacle held in the receiver and a retention feature carried on the housing. The retention feature is displaceable between a first position and a second position whereby the apparatus may be secured in a pocket of a trim panel of the motor vehicle.
US10703242B2
A head restraint assembly for a seat which includes a housing and a movable head rest portion which defines at least a part of a rest surface for a seat user's head. The movable head rest portion is pivotally mounted to the housing via a linkage mechanism that is configured to allow pivotal movement of the movable head rest portion to enable the angle of the rest surface relative to the housing to be adjusted.
US10703234B2
The invention relates to a seat carrier for a vehicle seat having a position displacement device for the vehicle seat, which is secured to at least one transverse seat carrier which is arranged on the base of the vehicle, and having a deformation device which is arranged between the position displacement device and the transverse seat carrier and which absorbs by means of deformation catapult movements of vehicle occupants which occur in the event of a collision. It is proposed that at least one crashbox be provided between the position displacement device and the transverse seat carrier as a deformation device.
US10703226B2
A longitudinal adjuster (10) for a vehicle seat (1), has pairs of rails (12a, 12b) including a lower rail (14a) and an upper rail (14b) that are movable in a longitudinal direction (x) relative to one another and can be locked together by a locking device (16). An actuating device (18) has a transmission rod (22) arranged between the two locking devices. A hand grip (20), connected to the transmission rod, is provided for joint actuation of the two locking devices. The transmission rod is operatively connected to the two locking devices. A spring element (30), which applies a spring force to the actuating device toward a rest position or passive position, does not project beyond the locking device in the vertical direction (z). The spring element applies a torque to the transmission rod along the longitudinal extent thereof relative to the longitudinal direction (x).
US10703225B2
Provided is a vehicle seat capable of stably supporting buttocks of a seated occupant in an adaptive manner according to each right-to-left width of the seated occupant's body, which width is different from occupant to occupant, during a turn of a vehicle. The vehicle seat includes a seat cushion (2) having a seat surface (8) and configured to support buttocks of the seated occupant from below, and a right and left pair of side supports (9, 9) provided on right and left sides of the seat surface, which side supports bulge upward to be higher than the seat surface and allowed to laterally support the buttocks of the seated occupant from either side. Each of the right and left pair of side supports (9, 9) is movable individually in the right-to-left direction with respect to the seat surface. During a turn of the vehicle, one of the side supports on an outer side of the turn is moved inward so as to support the buttocks of the seated occupant from the outer side of the turn. When the turn of the vehicle is completed, the moved side support is returned to its original position.
US10703224B2
A vehicle passenger compartment that defines a vehicle interior delimited in part by a floor, the interior having at least one front row of seats that includes at least two front seats, and at least one rear row of seats that includes at least two rear seats. The front and rear rows of seats are arranged behind one another in a longitudinal direction of the vehicle passenger compartment, each front seat being rotatable around a rotation axis substantially perpendicular to the floor. Each rear seat is translatable in a transverse direction substantially perpendicular to the longitudinal direction and to the rotation axis such that the rear seats can be moved away from or closer to one another in the transverse direction.
US10703223B2
The invention relates to a seat occupancy recognition device for recognising the occupancy of a seat, characterised by at least one volume detection device with at least one first sensor which is provided and designed to detect a volume on the vehicle seat, and at least one body function detection device with at least one second sensor, which is provided and designed to detect body functions, and at least one body function recognition device for recognising the detected body functions.
US10703222B2
A vehicle includes a traction battery, and a controller configured to, responsive to a transition from deplete mode to sustain mode during a first drive cycle, maintain a state of charge (SOC) of the battery within a range defined by a first maximum threshold, and responsive to initiation of a next drive cycle in the sustain mode, maintain the SOC within a range defined by a second maximum threshold greater than the first.
US10703221B2
A power supply control apparatus for an electric vehicle includes a main circuit including a smoothing capacitor connecting a power supply to an electric load driven by the power supply to smooth a fluctuation in an input voltage to the electric load, a main contactor interposed between the power supply of the main circuit and the electric load, and a precharge circuit connected in parallel with the main contactor and including a precharge contactor and a resistance element. When a timeout occurs before precharging by the precharge circuit is completed, the power supply control apparatus permits a retry of the precharging if the precharging is retried without any disadvantage.
US10703220B2
A system and method for wirelessly authorizing access to a charge port for an electric vehicle is provided. The system may first establish a wireless communication link with a charging cord and then receive, from the charging cord, a wireless signal including a charging cord identifier. Upon verifying that the charging cord is authorized for use with the electric vehicle based on the charging cord identifier, a charge port door may be opened providing access to the charge port. A wireless communication link with a charging cord may be established using a challenge-response protocol like some passive entry systems. Alternatively, a wireless communication link may be established using radio-frequency identification (RFID) technology embedded in the charge port and the charging cord handle.
US10703209B2
A vehicle to be driven by electric power which is wirelessly transmitted from a power transmitter having two transmission electrodes includes: two reception electrodes to receive AC power from the two transmission electrodes through capacitive coupling respectively with the two transmission electrodes; a power receiving circuit which is connected to the two reception electrodes to convert AC power received by the two reception electrodes into DC power or another form of AC power, and supply the DC power or other form of AC power to an electric motor which drives the vehicle; and a control circuit which, while the vehicle is traveling over the two transmission electrodes, increases an impedance of the vehicle as viewed from the power transmitter when a value of at least one of power, voltage and current in the power receiving circuit, or a change rate over time thereof, exceeds a threshold value.
US10703208B2
A braking control system and a method for an eco-friendly vehicle are provided to resolve discrepancy in braking force occurring during switching between hydraulic braking and regenerative braking. The system includes a deceleration determiner that determines target and actual decelerations of the vehicle based on collected information when braking and a torque calculator that calculates target and actual deceleration torques from the determined target and actual decelerations of the vehicle using vehicle equivalent inertia information. An error calculator calculates a torque error and a torque corrector corrects a pre-correction target regenerative braking torque by the calculated torque error and calculates a post-correction target regenerative braking torque. A motor controller adjusts a regenerative braking torque of a motor according to the calculated post-correction target regenerative braking torque.
US10703200B2
A drive apparatus for a motor vehicle, including a first motor drive device with at least one rotatable drive element and at least one other motor drive device with at least one rotatable drive element, at least one drive device that can be coupled to at least one drive axle on the vehicle side, with at least one rotatable drive element, at least one first motor drive device and with at least one other motor drive device and a gear device with at least one rotatable element that is or can be coupled to the drive device.
US10703199B2
The present invention provides a vehicle differential linked to and is arranged to move with a control arm and/or an a-arm of a suspension assembly, providing a floating differential suspension system. The differential is adapted to be mounted independent of the vehicle frame. Advantages of a floating differential suspension system include better alignment between the differential and the transfer case, reduced drive shaft movement in the vertical direction, minimal plunge at the drive shaft splines, longer axle length with increased wheel travel, decreased angle at mechanical connections, reduced camber change through the wheel travel, lower frame construction with increased range of suspension travel, and reduced risk of vehicle roll over without compromising the range of suspension travel.
US10703185B2
A rear impact system for an electric vehicle, the rear impact system includes a rear crash element extending laterally along a rear of the electric vehicle. The rear crash element defines an interior having a number of ribs extending between a front surface and a rear surface of the rear crash element. The system includes a left crash beam coupled between a rear portion of a rear wheel arch of the electric vehicle and the rear crash element of the electric vehicle and a right crash beam coupled between the rear portion of the rear wheel arch and the rear crash element of the electric vehicle.
US10703184B2
A hydraulic system (10) for a vehicle is provided. The hydraulic system comprises a shifting mechanism (20) and a pump assembly (30) configured to provide pressurized fluid to said shifting mechanism (20), and an electrical motor (40). The movement of the shifting mechanism (20) controls a valve function which serves to open a connection from the pump assembly (30) to the electrical motor (40).
US10703173B2
Disclosed are climate systems and methods for control the climate systems. A climate system includes a plurality of compressors, a first heat exchanger disposed downstream of the compressors and a second heat exchanger disposed downstream of the first heat exchanger. The compressors and heat exchangers are fluidly connected by refrigerant lines to form a refrigerant circuit. The climate system also includes a controller that controls the operation of the compressors to draw back lubricant to the compressors without use of an oil equalization system.
US10703163B2
A vehicle height adjusting device which adjusts vehicle height between a vehicle body and a lower arm, may include a suspension spring provided between the vehicle body and the lower arm; a variable portion provided inside an internal diameter of the suspension spring, and whose length is variable by converting a rotary driving motion around an axial direction into an axial rectilinear motion; and a power portion which is provided on the vehicle body, and rotates the variable portion.
US10703153B2
An axle device for the connection of a wheel to the body of a vehicle, having a wheel carrier for the fastening of the wheel, a first link and a second link for force-transmitting connection to the body, which links are both connected to the wheel carrier, furthermore having a supporting link with a carrier portion, which is connected to the wheel carrier, and with a body portion for force-transmitting connection to the body. The supporting link has a spring portion or supporting a spring unit and a damper portion for supporting a damper unit, which spring portion and damper portion are spaced apart from each other in the direction of travel of the body. The body portion has a torsion support portion with fastening freedom in the direction of travel and in the transverse direction of the body and with fastening stiffness in the vertical direction of the body.
US10703150B2
A system for attaching a safety chain between a tow vehicle and a trailer, said system including: at least one, but preferably two safety chains permanently attached to the trailer, each safety chain having first and second ends which are interconnected by interlocking chain links, with the first end secured to a releasable attachment for attaching the first end to the tow vehicle; and a locking/unlocking mechanism on each safety chain that is permanently attached to the trailer, and that releasably locks its respective safety chain so that a desired working length of that that safety chain can be provided, where the working length is measured between the locking/unlocking mechanism and the first end. The system provided optimum connection between the tow vehicle and the trailer in the event of a primary decoupling.
US10703147B2
A tire operation service system includes a tire information monitoring device to monitor information on a tire and detect position information and unique identifying information, a tire operation server including a user information database stored with user information corresponding to the identifying information and a shop information database stored with position information on each shop and connected to the tire information monitoring device via a communication network, and a shop terminal and a user terminal connected to the tire operation server via a communication network, wherein the tire operation server includes a user information extraction unit, a nearby shop extraction unit, a shop-with-handling-ability extraction unit, and a shop information transmission unit.
US10703144B2
A tire comprises a tread portion 2 provided with a first main groove 3 and a second main groove 4 each extending in a zigzag manner and a land region 10 defined between them. The land region 10 is provided with a longitudinal sipe 15 extending in a zigzag manner in the tire circumferential direction, first lug grooves 16, and second lug grooves 17. The land region 10 comprises first blocks 21 divided by the longitudinal sipe 15 and the first lug grooves 16, and second blocks 22 divided by the longitudinal sipe 15 and the second lug grooves 17. Each of the first blocks 21 and the second blocks 22 is provided with not less than three transverse sipes 25 extending across the entire width of the each of the first blocks 21 and the second blocks 22.
US10703142B2
The pneumatic tire of this disclosure comprises on a tread surface one or more land portions, wherein the land portions is formed into a protruding shape such that its tire radial outline in a tire widthwise cross section protrudes to a tire radial outer side, the outline includes, in the tire widthwise cross section, at least a first arcuate surface having a radius of curvature of a tire widthwise center of the land portion, and second arcuate surfaces having radiuses of curvature smaller than the first arcuate surface and located on both tire widthwise edges of the land portion, sipes extending in the tire width direction are formed on the land portions formed into the protruding shape, the sipes have chamfer portions, and the chamfer portions have chamfer widths on at least one of both tire widthwise edges larger than chamfer widths on the tire widthwise center.
US10703121B2
A transport mechanism includes a transport belt in which holes are formed and a suction clinging mechanism. The transport mechanism transports the medium in the first transporting direction, and when the upstream edge reaches a switching position, the transport mechanism transports the medium in the second transporting direction and stacks the medium in a stacker. The suction clinging mechanism includes an opening of a first suction chamber and an opening of a second suction chamber, and the opening of the first suction chamber is located downstream of the opening of the second suction chamber in the first transporting direction. The switching position is located upstream of the opening of the first suction chamber in the first transporting direction. In the first transporting direction, the distance from the switching position to the opening of the first suction chamber is longer than the length of each hole.
US10703110B2
A liquid holding container includes a top face portion having an opening portion, a bottom face portion facing the top face portion, a first ink absorber being disposed near the opening portion and layered in a first direction from the bottom face portion to the top face portion, the first ink absorber being configured to absorb a liquid introduced from the opening portion, and a second ink absorber being disposed outside the first absorber in a second direction that intersects the first direction and layered in the second direction, the second ink absorber being configured to absorb the liquid moving from the first ink absorber.
US10703097B2
An inkjet recorder includes at least one nozzle ejecting ink, at least one piezoelectric element, a power unit, and a processor. The at least one piezoelectric element deforms in response to an applied voltage and causing a change in pressure of ink to be supplied to the nozzle. The power unit supplies power for application of a driving voltage to the piezoelectric element. The processor cyclically applies the driving voltage in accordance with a predetermined driving voltage pattern to the piezoelectric element, acquires a representative value corresponding to the power supplied by the power unit in response to the application of the driving voltage, and detects an abnormal capacitance of the piezoelectric element determined based on the representative value.
US10703096B2
A detecting device is configured to detect a discharge state of droplets from a discharging head configured to discharge droplets onto a medium. A detecting device includes an irradiation unit configured to irradiate the medium on which a predetermined pattern is recorded with the droplets with irradiation light, and to scan the medium with the irradiation light in a scanning direction, a light-receiving unit configured to receive reflected light which is the irradiation light reflected by the medium, and to output a signal indicating intensity of the reflected light, and a control unit configured to perform determination process for determining a discharge state of the droplets onto the medium by using intensity change of the reflected light in scanning the predetermined pattern in the scanning direction.
US10703087B2
Examples associated with template generation are disclosed. One example includes identifying a set of edges of a set of labels from an image of a sheet of labels. Members of the set of labels in an unused state are also identified. A printing template is generated for the sheet of labels based on the edges of the set of labels and based on which members of the set of labels are in an in-used state.
US10703082B2
A method operates a three-dimensional object printer for production of cylindrical-shaped objects. The method uses a controller to operate an actuator operatively connected to a cylindrical member to rotate the cylindrical member within at least two supports, operate at least two printheads supplied with different materials to form portions of layers on the rotating cylindrical member with the different materials supplied to the at least two printheads, and operate at least one other actuator operatively connected to the at least two printheads and a curing device to move each of the printheads and the curing device independently of one another in a bidirectional radial direction with reference to a center of the rotating cylindrical member. This operation enables the curing device to be positioned to modify the layers formed on the rotating cylindrical member while the cylindrical member is rotating within the at least two supports.
US10703081B2
Method of producing an image display device in which an image display member and light-transmitting cover member having principal surface portion and circumferential edge portion on which a light-shielding layer is formed with a step portion formed between the principal surface portion and the circumferential edge portion are laminated through light-transmitting resin layer formed from a liquid optical resin composition so a light-shielding layer formed surface of the light-transmitting cover member is arranged to face the image display member, when a resin dispenser is moved from one end of the light-shielding layer formed surface of the light-transmitting cover member toward the other end applying the liquid optical resin composition to the light-shielding layer formed surface of the light-transmitting cover member, the application amount of optical resin composition is changed on the principal surface portion of the light-shielding layer formed surface of the light-transmitting cover member and on the light-shielding layer.
US10703073B2
A vehicle composite pane with an integrated light sensor is disclosed. The vehicle composite pane includes an outer pane and an inner pane that are bonded to one another via a thermoplastic intermediate layer. A plurality of photodiodes situated on a circuit board are arranged between the outer pane and the inner pane. The photodiodes are surface-mounted device (SMD) components. The photodiodes are arranged on the circuit board as groups of parallel connected photodiodes. All groups of the parallel connected photodiodes are connected to a common electrical input and each group is connected to a separate electrical output.
US10703069B2
Dimensionally stable open woven fabrics formed from a plurality of high tenacity warp elongate bodies interwoven and bonded with a plurality of transversely disposed, high tenacity weft elongate bodies, composite articles formed therefrom, and to a continuous process for forming the composite articles.
US10703064B2
Systems for producing pressware are provided. In one or more embodiments, a system can include an upper moveable platen, a lower moveable platen, a stationary platen, a punch platen, and one or more forming die assemblies. The upper moveable platen and the punch platen can be disposed above the stationary platen and the lower moveable platen can be disposed below the stationary platen. The upper moveable platen, the punch platen, and the lower moveable platen can be configured to move toward and away from the stationary platen. Each forming die assembly can include a set of upper and lower forming dies. The upper and lower forming dies can be coupled to the upper and lower moveable platens, respectively, and configured to press substrates to form pressware products within passageways extending through the stationary platen.
US10703052B2
A method and apparatus for producing a composite part are provided to enable composite parts to be assembled with precise control over the orientation and spatial distribution of reinforcing or other particles within a matrix material. The method and apparatus use magnetic fields applied during various additive manufacturing processes to achieve complex particles orientations within each layer of the part. The composite parts can achieve enhanced properties, including mechanical, thermal, electrical and optical properties.
US10703049B2
A system and method for welding thermoplastic components by positioning and moving a heated plate between the components to melt their respective faying surfaces, and as the plate moves, pressing the components together so that the melted faying surfaces bond together as they cool and re-solidify, thereby creating a composite structure. The plate has a heated portion which is positioned between and heated to melt a portion of the first and second faying surfaces. A manipulator mechanism moves the plate along an interface from between the portion to between a series of subsequent portions of the first and second faying surfaces, thereby welding the thermoplastic components along the entire interface to create the composite structure. The heated portion may contact the faying surfaces and melt them through conduction, or may be suspended between them and melt them through radiation and convection.
US10703046B2
A shaping system includes: a printing device that prints an image using predetermined ink on a thermal expansion sheet having a thermal expansion layer on one side; and a heating device that performs: an identifier detection process of detecting an identifier provided on the thermal expansion sheet; a heating condition setting process of setting a heating condition for heating the thermal expansion sheet, based on the identifier; and a heating process of heating the thermal expansion sheet based on the set heating condition.
US10703031B2
The present invention relates to articles, systems, and methods for injection molding an article. The method includes directing a first shot of molten polymeric material into a mold cavity to form a first part while simultaneously occluding a portion of the gate orifice area with a mold core. Once the first shot is solidified, then the mold core is withdrawn and a second shot is directed into the space previously occupied by the mold core while a portion of the gate orifice area is occluded by the solidified first shot.
US10703030B1
The present disclosure provides a molding system for preparing an injection-molded fiberless plastic article. The molding system includes a molding machine; a mold disposed on the molding machine; a processing module configured to generate an anisotropic viscosity distribution of the fiberless molding resin in the mold cavity; and a controller coupled to the processing module. The mold has a mold cavity for being filled with a fiberless molding resin including a plurality of polymer chains. The processing module is configured to generate the anisotropic viscosity distribution based on a molding condition for the molding machine and based in part on consideration of an orientation effect of the plurality of polymer chains. The controller is configured to control the molding machine with the molding condition using the generated anisotropic viscosity distribution of the fiberless molding resin to perform an actual molding process for preparing the injection-molded fiberless plastic article.
US10703029B2
There is provided a method of producing a foamed molded product, including: plasticizing and melting a resin material containing a thermoplastic resin and a chemical foaming agent in a plasticizing cylinder in which a screw is provided, to provide a molten resin containing the chemical foaming agent; supplying a fluid with a fixed pressure into the plasticizing cylinder to pressurize the molten resin; and performing foam molding of the molten resin. The resin material contains 0.1 to 2% by weight of the chemical foaming agent.
US10703025B1
Some variations provide a process for fabricating a ceramic structure, the process comprising: producing a plurality of preceramic polymer parts; chemically, physically, and/or thermally joining the preceramic polymer parts together, to generate a preceramic polymer structure; thermally treating the preceramic polymer structure, to generate a ceramic structure; and recovering the ceramic structure. The process may employ additive manufacturing, subtractive manufacturing, casting, or a combination thereof. A composite overwrap may be applied to the preceramic polymer structure prior to pyrolysis, and the composite overwrap also pyrolyzes to a ceramic composite and is a part of the final ceramic structure. The ceramic structure may be silicon oxycarbide, silicon carbide, silicon nitride, silicon oxynitride, silicon carbonitride, silicon boronitride, silicon boron carbonitride, or boron nitride, for example. The ceramic structure may have at least one dimension of 1 meter or greater, and may be a fully integrated ceramic object with no seams.
US10703021B2
An injection station of an injection blow molding machine. The injection station comprises a lower die plate and an upper die plate, with lower and upper die plates being shiftable relative to one another between an open position and a closed position. The injection station additionally includes one or more lower mold halves rigidly secured to the lower die plate. The injection station additionally includes one or more upper mold halves floatingly secured to the upper die plate such that positions of the upper mold halves are configured to be adjusted with respect to the upper die plate. Each of the lower mold halves corresponds with an upper mold half to present one or more mold cavities when the lower and upper die plates are in the closed position.
US10703017B2
A novel cutting method and apparatus includes a cutting blade adapted to consistently and easily form a desirable kerf in a concrete substrate while capturing substantially all resulting concrete dust.
US10703016B2
In one instance, a method of manufacturing an integrated circuit includes a method for dicing a semiconductor wafer that includes disposing the semiconductor wafer on a moveable cutting table, cutting the semiconductor wafer, and ejecting a clearing fluid across an exposed side of the semiconductor wafer, with full coverage across the semiconductor wafer, at least during the cutting of the semiconductor wafer. The ejecting clearing fluid is ejected to form a layer or membrane of fluid that clears or reduces other fluids from the exposed side or surface of the semiconductor wafer. Other aspects are presented.
US10703015B2
A cutting bead (13) for a saw rope (15) comprises a geometrically defined cutting portion (2) and tapers from the geometrically defined cutting portion (2) contrary to a sawing direction. With such cutting beads (13), a saw rope (15) is formed. In a method for manufacturing a saw rope (15), a cutting element (1) with a geometrically defined cutting portion (2) and an abrasive element (6) with a geometrically undefined cutting portion (14) or a neutral element (8) are joined. With the cutting element (1) and the abrasive element (6) or the neutral element (8), a cutting bead (13) is formed. The cutting bead (13) is joined onto the support rope (16).
US10703012B2
A tool to differentially compress a powder material comprises a differential compression piston and a support. The piston comprises a first part configured to apply a pressure on a first region of an external surface of the powder material. The piston comprises a second part with a recess which is located at a lateral distance from the first part and which is configured to face a second region of the external surface of the powder material. The tool further comprises a membrane that can be deformed by the piston. The deformable membrane is configured to at least partially retain the powder material in the tool.
US10703003B2
The present invention is drawn to apparatuses and methods for producing improved spirally cut meat products, such as spirally cut hams. The apparatus includes a shaft having a pad disposed at one end, said shaft slidably arranged includes a hollow tube mounted to a bracket. The apparatus includes a lever that rotates about a pivot mounted to the bracket. One end of the lever may engage with the end of the shaft opposite the pad. The apparatus includes an elastic member having one end attached to the tube and the other end affixed to the end of the shaft opposite the pad. As the lever rotates, the shaft may be pushed through the tube in one direction, or pulled in the tube in the other direction, depending on the direction, of rotation of the lever. The bracket may be configured to mount to a meat slicing device having a cutting element that projects through the bracket. Methods of spirally cutting meat products using the meat slicing device and the apparatus are also disclosed.
US10702994B1
Finger assemblies at the end of a robotic arm end effector includes talon that are retractable. Retraction may be accomplished by a vertical or horizontal barrel cam, a paddle and spin assembly, and/or a resilient plate.
US10702993B2
End effectors having compaction feet for welding thermoplastic parts of thermoplastic composite laminated articles are described. An example end effector is to be coupled to a robot. The end effector includes a welding head. The welding head includes a welder having a first central axis and a compaction foot having a second central axis. The welder is movable along the first central axis between a first retracted position and a first extended position relative to a surface of the end effector. The compaction foot circumscribes the welder and is movable along the second central axis between a second retracted position and a second extended position relative to the surface.
US10702984B2
A storage hutch assembly 10 including a plurality of dissimilar assemblies, such as a power tool holder assembly 120, which may be selectively and operatively deployed within the hutch assembly 10 upon a contained shelf 30 and/or upon a storage cart, such a cart 50, and/or upon a surface such as surface 25 contained within the storage hutch assembly 10.
US10702979B2
A torque adjustment device of a torque wrench includes a handle having a passage defined axially therethrough, and a driving head is connected to one end of the handle. A torque adjustment unit is located in the passage of the handle and includes a stationary member, a threaded shaft threadedly extending through the stationary member, a rotary member and a spring. The shaft includes a threaded rod that extends beyond the rotary member. A sleeve is mounted to the threaded shaft. A rotary unit includes a tube which has a mounting section and a threaded section on two ends thereof. By rotating the tube, the rotary member and the threaded shaft are rotated relative to the stationary member so as to compress the spring to set the output torque value. A knob is then threadedly connected to the threaded rod to secure the output torque value.
US10702972B2
A polishing apparatus capable of precisely controlling a polishing profile, particularly a polishing profile in an edge portion, of a wafer is disclosed. The polishing apparatus includes: a top ring shaft; a housing fixed to the top ring shaft; a flexible membrane configured to press a wafer against a polishing pad; a top ring body configured to hold the flexible membrane; a retaining ring coupled to the top ring body and disposed so as to surround the flexible membrane; a gimbal mechanism configured to allow the top ring body and the retaining ring to tilt with respect to the housing; and a local load exerting mechanism configured to exert a downward local load on a part of the retaining ring.
US10702969B2
A lapping tool assembly includes a mount tool and an interposer structure interposed between actuators and the mount tool, where the interposer includes interposer pins reactively coupled with the actuators such that each interposer pin is configured to receive a translational force from a corresponding actuator and to transmit the force to a corresponding actuation pin of the mount tool. The interposer may include a zero z-axis shift flexure system, and/or a z-axis decoupling flexure system, and/or alignment features, for accurately transmitting the actuation forces to the mount tool, while inhibiting affecting other portions of the mount tool.
US10702968B2
A machine featuring a treatment tool that grinds a surface to a desired profile, imparts a desired roughness to that surface, and removes contamination from the surface, the machine configured to control multiple independent input variables simultaneously, the controllable variables selected from the group consisting of (i) velocity, (ii) rotation, and (iii) dither of the treatment tool, and (iv) pressure of the treatment tool against the surface. The machine can move the treatment tool with six degrees of freedom.
US10702965B2
A cross-recess screwdriver sharpening assembly for sharpening a cross-recess screwdriver includes a housing that has a sharpening aperture. A plurality of grinding wheels is rotatably mounted within the housing. Each of the grinding wheels is arranged to define a grinding space. A plurality of sleeves is included wherein each of the sleeves is removably extendable into the interior of the housing to have the cross-recess screwdriver positioned therethrough such that the cross-recess screwdriver extends into the housing. The sharpening aperture receives one of the sleeves therethrough and is centrally aligned with the grinding space such that the cross-recess screwdriver is extendable into the grinding space to sharpen the cross-recess screwdriver. A drive is mounted in the housing and mechanically coupled to each of the grinding wheels. The drive is turned on to rotate each of the grinding wheels.
US10702963B2
Provided is an indication lamp device with a countdown module, including: a lamp body structure and a controller. The lamp body structure is installed on an apparatus machine erectly and has a body and a light guiding mask. The body is provided with a time displaying module and a plurality of light emitting modules. The time displaying module is installed along an elongated direction of the body. The light guiding mask is transparent and masks the body. The controller is coupled to the body and the apparatus machine for receiving an operating state signal and a machining time signal of the apparatus machine and controlling the light emitting module to emit light and the time displaying module to display the machining countdown based on the operating state signal and the machining time signal, allowing operators to control the operating state and machining time of the apparatus machine effectively.
US10702960B2
Robot (1) to move a support platform (6) along a series of nuts (2) pre-screwed on bolts (3) arranged in a linear or in particular curved flange connection (4). The bolts (3) project from the nuts (2) pre-screwed in substantially a nut plane (13) by a projection length (15). The robot (1) comprises a drive to move the robot (1) along the curved flange connection (4). The drive comprises at least one drive element (12) and holding means (11) both connected to the support platform (6), wherein the holding means (11) comprise at least one pair of guiding rails (16, 17) connected to the support platform (6) in a distance from each other of more than the diameter (D) of the bolts (3) and less than the width across flat (AF) of the nuts (2) and projecting more than the projection length (15) from the support platform (6).
US10702959B2
Providing a seal member taking-out device which can successfully take out a larger number of seal members. The seal member taking-out device includes a shaft member, a cylinder member, a moving member, and a taking-out member. The shaft member is columnar or cylindrical. The cylinder member is cylindrical and the shaft member is inserted through the cylinder member so that the cylinder member is movable in a direction of a central axis of the shaft member. The cylinder member is shorter than the shaft member and extends in the direction of the central axis of the shaft member. The moving member moves a plurality of seal members stacked on the shaft member and the cylinder member, in a direction of a distal end of the shaft member. The taking-out member takes out the seal members from the distal end of the shaft member.
US10702953B2
The present invention is a composite welding wire for fusion welding of components manufactured of superalloys. The composite weld wire includes a surface layer applied to the core wire in a green condition and bonded to the core wire. The surface layer includes alloying elements selected from among B and Si, the total bulk content of B and Si representing 0.5 to 4.0 wt. % of the composite welding wire. The boron and silicon alloying elements reduce the melting temperature and increase the solidification range of the weld pool, minimizing the incidence of weld cracking compared to welding without the coating. The green condition surface layer is comprised of more than 80 wt. % of the bulk content of the composite welding wire selected from the combination of B and Si.
US10702949B2
A laser cutting device includes: a main body configured to emit a laser beam, a cutting point being formed at a position where the laser beam intersects a material to be cut; a gas blow pipe, of which a gas blow mouth configured to blow out a gas flow that is inclined to the laser beam, the gas flow capable of aiming at the cutting point; a gas suction pipe, of which a gas suction mouth being located downstream of a flowing direction of the gas flow, relative to the cutting point; the gas blow pipe and the gas suction pipe being attached respectively to the main body by means of an adjustment mechanism, such that positions of the gas blow pipe and the gas suction pipe are adjustable to adapt to change of a laser beam cutting route.
US10702948B2
A method provides for producing modifications in or on a transparent workpiece using a laser processing device. The laser processing device has a short pulse or ultrashort pulse laser that emits laser radiation having a wavelength in the transparency range of the workpiece and which has a beam-shaping optical unit for beam shaping for focusing the laser radiation. The transparent workpiece is composed of a material that has a plurality of phases, of which at least two phases have different dielectric constants, of which in turn the one phase is a phase embedded in the form of particles, which phase is substantially surrounded by the other phase, and wherein the product of the volume of the particles specified in cubic nanometers and the ratio of the absolute value of the difference of the two different dielectric constants to the dielectric constant of the surrounding phase is greater than 500.
US10702943B2
The present disclosure concerns devices and methods for resistance welding sandwich sheets to other components. Many sandwich sheets include a thermoplastic material layer disposed between two metallic cover layers. The sandwich sheet and the other component may be secured relative to one another by a clamping arrangement. A region of the sandwich sheet to be welded may be heated by a preheating current to soften and displace the thermoplastic material layer when the cover layers are pressed together. With respect to the preheating current, a first electrode arrangement may at least temporarily contact an electrically conductive contacting region of the clamping arrangement such that the preheating current can flow via the clamping arrangement. The cover layers may be welded to the other component with a welding current via the first welding electrode of the first electrode arrangement and a second welding electrode of a second electrode arrangement.
US10702941B2
A system for manufacturing boiler tubes includes a first spindle for receiving a first tube having a first weld preparation, a second spindle for receiving a second tube having a second weld preparation, the first spindle and the second spindle being rotatable synchronously, and a welding device having a first weld head. The welding device is configured to automatically weld the first tube to the second tube according to a control routine stored in memory to produce a boiler tube.
US10702939B2
Aspects include supplying a plurality of nickel-enriched braze powder particles to a cold spray system through a particle supply inlet. The nickel-enriched braze powder particles are accelerated through a transfer tube and out an exit in the transfer tube towards a substrate to produce a braze cold-sprayed substrate. A component surface is positioned proximate to the braze cold-sprayed substrate. The braze cold-sprayed substrate is heated to bond the braze cold-sprayed substrate to the component surface.
US10702935B2
A process for improving the excitation behavior of a ground bevel gear set by altering the surface structure of a gear set member from tooth slot to tooth slot (Teeth 1-3). The method comprises shifting the roll-positions in a way that not every facet or flat (F) is positioned the same way on each flank (2) and/or changing the distances of the roll angle along a tooth slot (delta RPj) whereby flats are spaced unequally (i.e. varying widths) along the tooth. One or more additional processes for altering the surface structure may be included.
US10702932B2
To provide a power tool configured to stably rotate an end tool. The provided power tool includes a brushless motor including a rotor configured to rotate; a rectifier circuit configured to rectify an AC voltage; a smoothing capacitor configured to smooth the AC voltage rectified by the rectifier circuit to a pulsating voltage; an inverter circuit configured to perform switching operations to output the pulsating voltage to the brushless motor; a deceleration mechanism including: a driving portion at a rotor side, a driven portion configured to transmit a rotating force to an end tool side, and an elastic member configured to transmit a rotational force of the driving portion to the driven portion, the deceleration mechanism configured to decelerate a speed of a rotation of the rotor and configured to transmit the rotation to an end tool.
US10702927B2
An accessory for coupling to an oscillating power tool includes a working end portion and an attachment portion. The working end portion defines and extends along a working axis. The attachment portion is coupled to the working end portion and includes a top wall, a bottom wall spaced apart from the top wall, and a peripheral wall extending from the top wall to the bottom wall at least partially around the top wall to form at least a portion of a polygonal shape. A generally U-shaped opening is defined in the top wall, extends along an attachment axis at an angle to the working axis, has a central portion at a center of the attachment portion, and is open to a gap in the peripheral wall. A plurality of radial openings is defined in the top wall and arranged between the U-shaped opening and the peripheral wall. The peripheral wall, the U-shaped opening, and the plurality of radial openings are configured to couple the attachment portion to at least two different configurations of accessory attachment mechanisms on different oscillating power tools.
US10702926B2
A rotary cutting blade material has an attaching structure forming portion that is to serve as an attaching portion to the shank, a cutting structure forming portion that is to serve as a cutting blade, and a joint portion. The cutting structure forming portion has a core portion and a surface portion provided on the attaching structure forming portion with the joint portion being interposed, and the surface portion covers at least a part of a surface of the core portion. The attaching structure forming portion includes a hard material including a hard component and one or two or more types of iron group elements, and the hard material has a Young's modulus of not more than 350 GPa. The core portion includes a cemented carbide material, and the surface portion includes PCD or CBN.
US10702925B1
A composite material comprising a metal matrix and nanocellulose supplement. The metal matrix is formed of a metal base material and may be monolithic throughout the composite material. The nanocellulose supplement improves a material property of the metal matrix and is formed of a nanocellulose supplement material dispersed in the metal base material. Importantly, the nanocellulose supplement material does not become damaged when the composite material is formed.
US10702922B2
A method for manufacturing a metallic component including the steps of providing a capsule, which defines at least a portion of the shape of the metallic component, arranging metallic material in the capsule, sealing the capsule, subjecting the capsule to Hot Isostatic Pressing for a predetermined time, at a predetermined pressure and at a predetermined temperature, and optionally, removing the capsule. The metallic material is at least one pre-manufactured coherent body, which pre-manufactured coherent body being made of metallic powder, wherein at least a portion of the metallic powder is consolidated such that the metallic powder is held together into a pre-manufactured coherent body. At least one portion of the pre-manufactured coherent body is manufactured by Additive Manufacturing by subsequently arranging superimposed layers of metallic powder.
US10702899B2
An apparatus and associated methods are disclosed for washing a plurality of beverage containers. The apparatus may include an enclosure, a holder positioned in the enclosure, a receptacle for a beverage container in the holder, and an injector coupled to the enclosure. The holder may rotate in the enclosure about an axis of rotation. As the holder rotates, the receptacle may move (e.g., rotate) through a plurality of positions about the axis of rotation. The receptacle may be positioned to receive a beverage container in a first position about the axis of rotation. When rotated to a second position about the axis of rotation, the receptacle may be aligned with the injector and the injector may provide a fluid inside the beverage container in the receptacle. The receptacle may be positioned to drain the fluid from the beverage container in the receptacle in the second position or after being rotated to a third position.
US10702897B2
The present invention concerns a method of weakening and removal of coke or carbonaceous material which deposits as a result of thermal cracking of hydrocarbons on the inner walls of coils, piping, tubing, and in general, hydrocarbon processing equipment.
